in-situ weighing system Articles

  • Design of a Large Calibration Chamber

    The design and operation of a conceptually simple, low-cost chamber for calibration of cone penetrometers and other in situ devices is described. The chamber weighs over 5500 kg and houses a 4400-kg soil sample that is 1.5 m in diameter and height. Operations in the chamber are automated using a self-equilibrating hydraulic insertion frame, a soil pluviation system for sand placement, a vacuum ...


    By ASTM International

  • Kijlstra helps save time and space

    A pre-fabricated Combined Sewer Overflow (CSO) chamber from leading precast drainage manufacturer Kijlstra has helped contractor Clancy Docwra cut installation times and minimise disruption during a flood alleviation project for Scottish Water Solutions. The scheme involved upsizing the surface water drainage system and installing a CSO to protect homes in Kingsknowe Road North, located in the ...


    By Kijlstra LTD.

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • The DNAPL Remediation Challenge: Is There a Case for Source Depletion?

    Untitled Document Executive Summary Introduction Releases of Dense Non-Aqueous Phase Liquids (DNAPLs) at a large number of public ...


  • Pipeline Zooming for a Comprehensive Infrastructure Survey.

    Time, budget and resources often keep a municipality from maintaining comprehensive, up-to-date information on water and sewer pipeline conditions. Without a complete understanding of their infrastructures, municipal supervisors cannot properly prioritize and schedule maintenance activities. As a result, emergencies—backups, collapses, and overflows—happen unexpectedly, and must be dealt with on ...


    By Envirosight LLC

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you