incineration flue gas Articles

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • The Influence of PVC on the Quantity and Hazardousness of Flue Gas Cleaning Residues from Incineration

    The study estimates the influence of PVC on the quantity and hazardousness of flue gas residues from incineration. The analysis has been carried out on both theoretical and practical terms. A distinction between dry, semi-dry and wet gas treatment systems has been made. The influence of PVC has been assessed on the combustion steps and therefore on the distribution of chlorine and other ...

  • Dosing and mixing of powdered activated carbon for flue gas applications

    Subject: Powdered activated carbon (PAC) is dosed in dry powder form into flue gas for the removal of dioxins, furanes, mercury and other heavy metals from flue gases. Gericke supplies complete solutions for the handling of bulk solids. These complete installations are characterized by their clean, accurate, trouble- and dustfree operation. Application: Furnaces, incinerators, sinter ...


    By Gericke

  • Pollutant emissions from modern incinerators

    Emissions of dioxins are mainly from incinerators, domestic and industrial coal combustion, and traffic. However, the major public concern and research effort are associated with the emissions of organic micropollutants from waste incinerators. This paper gives a brief overview of the more recent research and development for the removal of dioxins and heavy metals from flue-gas streams. Special ...


    By Inderscience Publishers

  • Atmospheric impact of a municipal wastes incinerator

    This paper presents a case study of an air pollution dispersion model for the atmospheric impact assessment of a new municipal wastes incinerator (MWI). The capacity of the present MWI will increase more than ten times, and a new high-efficiency flue gas treatment system is projected. The environmental impact study has been focused on the long-term aspect of the air pollution (chronic pollution) ...


    By Inderscience Publishers

  • The impact of advanced digestion on incineration of sewage sludge

    Abstract Traditionally, when incineratin sewage sludge, it was preferable to burn raw undlgested sludge, as digestion - by extracting some of the energy from sludge- subsequently reduce its calorific value. However, when considering incineration as part of a wider strategy, the desicion whether or not to include digestion becomes less clear. Since, virtually all of the requirements of ...


    By Cambi AS

  • QinetiQ – Modular EU Compliant incineration package - Case Study

    TodaySure™ were commissioned to construct an Integrated Battlefield Support System Incinerator as part of a Ministry of Defence funded research programme, to demonstrate that waste management can be achieved in a responsible way, compliant with challenging environmental standards. Designed to meet the stringent requirements of the EU Waste Incineration Directive, the combustion chambers, ...


    By Todaysure Limited

  • Minimization of Major Air Pollutants from Sewage Sludge Fluid Bed Incinerators

    ABSTRACT Emissions of major air pollutants including carbon monoxide (CO), nitrogen oxides (NOx) and mercury (Hg) were studied at two sewage sludge fluidized bed combustion (FBC) plants. Both the North West Bergen (NWB) County Utility Authority and the Little Miami (LM) plants have air pollution control systems (APCS) that are of the wet type. Various operating conditions such as temperature, ...

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • Heavy metals in wet scrubber residue from a medium–sized (32 MW) municipal district heating plant incinerating wood and peat in a fluidised bed boiler

    Due to the low total concentrations of heavy metals and extractable compounds, it is recommended that the wet scrubber residue be used as a construction agent instead of being disposed of in landfills. According to five–stage sequential extraction, the highest concentrations of most of the heavy metals occurred in the residual fraction (i.e., HF + HNO3 + HCl), which means that ...


    By Inderscience Publishers

  • Renewable Energy: the steam production plant at Reinsberger Spezialpapier is in operation

    Residual products from the paper recycling plant are used directly to produce steam for the paper factory. An interesting alternative of renewable energy solutions. Typical tasks: You have to dispose production residues You need a low cost and future safe energy production Our solution: Usage of the ...


    By Michaelis GmbH & Co. KG

  • Practical Implementation of EN-14181in Particulate Monitoring - Case Study

    Introduction This case study summarises the results of implementing particulate monitoring according to EN-14181 in a municipal incinerator operated by SUA in Teesside, UK, with a ProScatter M type particulate instrument (Model PCME QAL 181). It also provides a comparison of results for monitoring the same stack with an ElectroDynamic particulate instrument (Model PCME QAL 991). This case ...


    By PCME Ltd

  • Analysis of PCBs in emission samples: non ortho, mono-ortho and homolog totals by level of chlorination

    Polychlorinated biphenyls (PCBs) are one of the most widespread persistent organic pollutants, identified in every component of the global ecosystem. A production of approximately 2 * 10 9 Kg technical PCB occurred form 1930 to the late 1970 1 and the total amount released into the environment is estimated in 370. 000 2 tonnes. Twelve of the possible 209 PCBs are non- and mono-ortho substituted ...


    By Monitoring Systems GmbH

  • How to make your waste disposal process pay for itself

    Incineration waste to energy means you can get FREE HEAT! It’s true to say that the first priority of any of the industrial waste incinerators we design and manufacture is to provide an efficient, cost-effective, environmentally responsible and legally compliant waste disposal system. ...


    By Todaysure Limited

  • OTM 17: Determination of Metal Concentrations Using Filters and Solid Sorbents in XRF Analyisis case study

    Eli Lilly and Company (Lilly) operates a waste incineration system located at the Tippecanoe Laboratories in Lafayette, Indiana. This incinerator system includes an Xact multi-metals continuous emissions monitoring system (Xact-CEMS, manufactured by Cooper Environmental Services, LLC) for demonstrating attainment with the Hazardous Waste Combustor MACT for semi-volatile metals, low-volatile ...


    By Cooper Environmental

  • The Other Side of Zirconium Oxide case study

    Regular Fuel Efficiency Applications Separate Oxygen and Combustibles Sensors In standard flue gas applications for Thermox analyzers, the user generally tries to extract the maximum energy from the fuel and transfers as much of that energy as possible to the process. These applications require the process to be operated as efficiently as possible by keeping both oxygen (excess air) and ...

  • A STIEFEL project UTO Uvrier case study

    The waste incineration plant UTO Uvrier is situated in the south western part of Switzerland. The Association which controls the plant was established in 1969 and treats waste from 44 municipalities with a combined population of 170,000 inhabitants. The principal task of UTO Uvrier is the thermal heat recovery from urban and industrial waste. Apart from this, UTO also treats other types of waste ...


    By Jakob Stiefel GmbH

  • Case study - Bespoke Solutions

    PROJECT 5000kg/h animal remains incineration project in accordance with EU WID Makkah, Kingdom of Saudi Arabia PROJECT DESCRIPTION The purpose of the plant was to dispose of the animal waste associated with Hajj religious festi-val in Makkah Saudi Arabia. During the festival approximately 10,000 tonnes of waste is pro-duced in 4-5 days. Historically ...


    By Todaysure Limited

  • Analysis of PCBs in emission samples: non ortho, mono-ortho and homolog totals by level of chlorination

    IntroductionPolychlorinated biphenyls (PCBs) are one of the most widespread persistent organic pollutants, identified in every component of the global ecosystem. A production of approximately 2 * 10 9 Kg technical PCB occurred form 1930 to the late 1970 1 and the total amount released into the environment is estimated in 370. 000 2 tonnes. Twelve of the possible 209 PCBs are non- and mono-ortho ...


    By Monitoring Systems GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you