incineration plant component Articles

  • Increase in capacity of an incinerator

    In addition to its own and external products, system providers involved in the project business also provide process knowledge and complete projects refined to the last detail. The standard is high. Their own knowledge combined with the supplier’s knowledge leads to a complete solution. From the delivery of the components to their installation, trial operation and commissioning, all the ...


    By sera GmbH

  • Power Case Study - North Incinerator

    North Incinerator Finds Solution to Excessive Sweep Elbow Wear At Montgomery County's North Incinerator plant, there was a problem several years ago. The Dayton, OH, area trash-to-energy plant was experiencing repeated shutdowns due to sweep elbow failure in its dense phase pneumatic conveying system, a component of the lime injection system in operation there. In order to ...


    By HammerTek Corporation

  • Minimizing ammonia consumption in DeNOx plants – Case Study

    Flue gas denitrification Combustion processes result in emissions that can be harmful to the environment, in particular carbon dioxide (CO2), sulfur dioxide (SO2), nitric oxides (NOx), and dust. Therefore, measures are implemented in power stations and other plants comprising combustion processes to reduce emissions. For flue gas denitrification, besides front-end primary ...

  • Process analytics in vinyl chloride monomer (VCM) plants – Case Study

    Vinyl chloride monomer (VCM), made from ethylene and chlorine by pyrolysis, is the feedstock for the production of the very common plastic material PVC. Modern VCM plants use integrated processes, combining endothermic and exothermic reactions in an almost energy balanced operation. Plants optimize the product quality, plant safety and cost efficiency by using advanced process control equipment ...

  • Real-time O2 monitoring in VCM plants using the In-situ laser gas analyzer – Case Study

    Vinyl Chloride Monomer (VCM) Vinyl Chloride Monomer is a colorless, flammable gas. It is of very great importance as feedstock in the production of polyvinyl chloride (PVC), one of the world´s most versatile thermoplastics. Originally, acetylene has been used as feedstock for VCM production but was replaced stepwise by the inexpensive ethylene. Complete changeover to almost ...

  • Recycling Options for Mixed Plastics in Automotive Shredder Residues

    Waste production (ASR) from shredding of automobiles is a major global problem. The current method of disposal via landfilling is unacceptable due to environmental concerns and high cost. This project focuses on the evaluation of competing technologies for recycling automotive shredder residues and in helping solve this industrial problem by analyzing feasible solutions for implementation. The ...


  • Like a phoenix from the ashes

    Thanks to growing environmental awareness, waste is increasingly being separated and recycled. However, residual waste always remains that can't easily be recycled. This ends up in waste incineration plants (referred to as KVAs in Swiss German) for disposal and reclaiming, such as the KVA Linthgebiet in Niederurnen in the Swiss canton of Glarus. Due to the strict environmental specifications ...


    By Metrohm AG

  • A STIEFEL project UTO Uvrier case study

    The waste incineration plant UTO Uvrier is situated in the south western part of Switzerland. The Association which controls the plant was established in 1969 and treats waste from 44 municipalities with a combined population of 170,000 inhabitants. The principal task of UTO Uvrier is the thermal heat recovery from urban and industrial waste. Apart from this, UTO also treats other types of waste ...


    By Jakob Stiefel GmbH

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • Trials about composting of solid wastes from palm oil Mills in Indonesia

    The solid wastes produced in palm oil mills are empty fruit bunch (EFB), mesocarp fibre, shell, and palm kernel cake. On an average the amount of EFB is 0,220 t of 1 t oil palm fruit bunch (Singh, 1994). In Indonesia, there will be about 2.9 million tonnes EFB (dry basis) in 2000 (Lubis et. al. 1994). At the moment, EFB in Indonesian palm oil mills are burnt in incinerators to reduce the mass and ...


    By ORBIT e.V.

  • Recovery of Precious Metal Catalysts - A New Process Using Supercritical Water Oxidation

    Up to now, the recovery of precious metals used as catalysts in chemical processes has involved the use of incineration. Now, however, a British-Swedish joint venture has developed a process which uses supercritical water oxidation instead, which provides many economic and environmental advantages. Precious metals are used extensively in catalysts in a wide range of industrial chemical processes. ...

  • OMNNI Report of Asphalt Mix Design and Testing

    This report presents the results of asphalt mix design and testing using glass aggregate produced by Minergy. Glass aggregate from the MinergyWinneconne Pilot Plant produced from sediments dredged from the Fox River was used in the design and testing. Two sizes of glass aggregates were used in the asphalt mix designs. One size has a gradation that is naturally produced by the plant during the ...


    By Minergy Corporation Limited

  • A STIEFEL project KVA Linthgebiet Niederurnen case study

    The waste incineration plant KVA Linthgebiet is situated in Switzerland. The plant disposes of a total of 120’000 tons of waste each year from 240‘000 inhabitants in the surrounding area. Due to the thermal recovery, it produces annually 84 GWhour of electrical energy and therefore saves 250’000 litres of fuel oil by providing energy to a district heating system. Background ...


    By Jakob Stiefel GmbH

  • Mechanical Biological Treatment (MBT): The new kid on the UK waste management block

    Waste management in the United Kingdom (UK) has undergone a revolution in the past 20 years. In 1990, the UK landfilled more than 90 percent of its municipal solid waste (MSW), incinerated about 8 percent and recycled the remaining 2 percent. It had one the highest landfill rates in Western Europe and one of the lowest recycling rates, reflecting the UK’s mining traditions and aggregates ...


    By Waste Advantage Magazine

  • Sharon

    Abstract SHARON8 is a very cost-effective treatment system for the total removal of nitrogen components, through nitriflcation/denithfication. from wastewater flow streams containing high concentrations of nitrogen. The system is used for the treatment of municipal wastewater side streams from both dewatered digested primary sludge and waste activated biosolids to achieve high total ...

  • Development of wet pre-treatment and pulper technology

    Since 1984 BTA is involved in activities in the area of waste pre-treatment. This process was first implemented in 1986 in a pilot plant. The patented BTA-Process is consisting of the following main steps: - Wet pre-treatment of waste with separation of the contaminants and production of a pumpable suspension- Sand separation by a hydrodynamic grit removal system- Digestion of the suspension in ...


    By ORBIT e.V.

  • Rest or mixed waste sorting-digestion-separation for the recovery of recyclables and energy

    Source separate collection of biowaste has been implemented in many countries in Europe, especially in the German- speaking countries and the Benelux. By separating the biowaste fraction, a waste fraction called rest waste or grey waste is left over. This fraction is in most instances landfilled or incinerated. However, rest waste still contains a considerable amount of organics (up to 65%) which ...


    By ORBIT e.V.

  • Where To Find Money In Biogas

    On the surface, wastewater treatment operations don’t appear to be handling precious material. But these facilities are actually processing a great deal of value every day. Sludge, a byproduct of wastewater treatment, turns out to be an entity worth cherishing. “Depending on treated sludge quality, the final product can be land applied, landfilled, incinerated, or composed,” ...


    By KLa Systems, Inc.

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • Novel anaerobic digestion process with sludge ozonation for economically feasible power production from biogas

    A novel process scheme was developed to achieve economically feasible energy recovery from anaerobic digestion. The new process scheme employs a hybrid configuration of mesophilic and thermophilic anaerobic digestion with sludge ozonation: the ozonated sludge is first degraded in a thermophilic digester and then further degraded in a mesophilic digester. In small-scale pilot experiments of the ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you