incineration plant part Articles

  • Power Case Study - North Incinerator

    North Incinerator Finds Solution to Excessive Sweep Elbow Wear At Montgomery County's North Incinerator plant, there was a problem several years ago. The Dayton, OH, area trash-to-energy plant was experiencing repeated shutdowns due to sweep elbow failure in its dense phase pneumatic conveying system, a component of the lime injection system in operation there. In order to ...


    By HammerTek Corporation

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • On-Site Incineration Tames Arsenal Waste Mixture

    Toxic wastes from various chemical processing activities at Rocky Mountain Arsenal (RMA) had accumulated in on-site evaporation basins over many years. The highly corrosive wastes, which posed environmental and potential health hazards, were by-products of the U.S. government’s chemical weapons program during World War 11 and its later weapons disposal program, as weIl as sorne pesticide ...


  • The impact of advanced digestion on incineration of sewage sludge

    Abstract Traditionally, when incineratin sewage sludge, it was preferable to burn raw undlgested sludge, as digestion - by extracting some of the energy from sludge- subsequently reduce its calorific value. However, when considering incineration as part of a wider strategy, the desicion whether or not to include digestion becomes less clear. Since, virtually all of the requirements of ...


    By Cambi AS

  • QinetiQ – Modular EU Compliant incineration package - Case Study

    TodaySure™ were commissioned to construct an Integrated Battlefield Support System Incinerator as part of a Ministry of Defence funded research programme, to demonstrate that waste management can be achieved in a responsible way, compliant with challenging environmental standards. Designed to meet the stringent requirements of the EU Waste Incineration Directive, the combustion chambers, ...


    By Todaysure Limited

  • From raw incineration to advanced digestion – influence of sustainability on meeting a sludge strategy

    Abstract A proposed solution of a raw sludge incineration plant had been identified to meet the changing sludgestrategy requirements of United Utilities (a major UK water company) from 2005 – 2010. This solution wasendorsed by a UK water Regulator as part of their 5 yearly investment program. However, due to a changingenvironment, and work completed by the project and strategy team ...


    By Cambi AS

  • Oil Emulsion and cleaning parts wastewater

    Customer The company is the only car manufacturer in Slovakia producing engines. In the Slovak facility, they produce gasoline engines by five production lines, four metal cutting lines and one assembly line. Customer needs Disposal of huge not dischargeable oily waste water is one important issue that the company has set out to exploit. The goal ...

  • Are incineration and landfills the answer to save us from the recycling crisis?

    For plastic recycling, this year hasn’t exactly been one of the best – what is to blame? Oil. Shockingly, it actually costs more to recycle old plastic than it does to make new in many ways. Petroleum prices have fallen so low, as low as 70% below the level in June 2014. This may be great for some – however with it has fallen the cost of Virgin Plastic which is made from ...


    By GPT Waste Management Ltd

  • Recycling, waste-to-energy to play an important part in reducing CO2

    More recycling and waste-to-energy programmes will reduce net greenhouse gas emissions. This is the conclusion of three recently published studies. A new briefing released by the European Environment Agency (EEA) states that: “Increased recovery of waste and diverting waste away from landfill play a key role in tackling the environmental impacts of increasing waste volumes. As recycling and ...

  • Cellulosic biofuel plant

    Cellulosic Biofuels meets National Emission Standards for Hazardous Air Pollutants A multitude of new cellulosic bio-fuel processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. The applicability of meeting this NESHAP is: A facility must be a ...

  • Sorting plants for industrial waste, location: south of Germany

    Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete  industrial waste ...


  • Waste to energy plants – management issues and current practices

    Though open waste dumping has long back disappeared in the developed world ,it continues to be an eye-sore and environmental threat in many parts of the developing world. Landfills are becoming a common practice despite opposition from local community groups as well as NGOs for various reasons. However better equipped landfill facilities with provision for methane capture is being viewed as an ...

  • Expert witness - energy from waste plant

    The task S Grundon Ltd operates a clinical waste incinerator and municipal waste recycling facility at its Colnbrook facility ...


    By Ricardo-AEA

  • Tri-NOx Multi-Chem Wet Scrubber. Case Study of Our NOx Scrubber in a Plastics Resin Plant.

    As part of a commitment to reduce airborne emissions – or even the threat of such emissions – the Mt. Vernon, IN plant of GE Plastics has installed a NOx scrubber. When such GE Plastics products as Ultem resins are produced, nitric acid is used, and emissions from this step are tightly controlled. But to address upset conditions, the company opted to install an emergency scrubber that can treat ...


    By Tri-Mer Corporation

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • Thermal Treatment Of Halogenated Inorganic Aqueous Waste With Energy And By-Product Recovery

    This paper describes the incineration technology used to safely destroy the liquid and gaseous wastes containing inorganic salts generated by Bulk Pharmaceutical and agrochemical industries. The plants are supplied with dedicated downstream Air Pollution Control System (APC) or energy recovery where applicable. Due to the emergence of new products and increased production in Pharmaceutical and ...

  • Biological recycling of wastes in France: from crisis to new management principles and rules

    In 1992, the context of waste management in France has changed with the publication of a second law that defined the framework of the new public national policy. This law has opened a ten years transition plan, but two main points have been modified. First, the place of landfilling has moved from a status of treatment process in competition with incineration or composting to the role of storage ...


    By ORBIT e.V.

  • How to make your waste disposal process pay for itself

    Incineration waste to energy means you can get FREE HEAT! It’s true to say that the first priority of any of the industrial waste incinerators we design and manufacture is to provide an efficient, cost-effective, environmentally responsible and legally compliant waste disposal system. ...


    By Todaysure Limited

  • Recycling Options for Mixed Plastics in Automotive Shredder Residues

    Waste production (ASR) from shredding of automobiles is a major global problem. The current method of disposal via landfilling is unacceptable due to environmental concerns and high cost. This project focuses on the evaluation of competing technologies for recycling automotive shredder residues and in helping solve this industrial problem by analyzing feasible solutions for implementation. The ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you