incinerator supplier Articles

  • Recent Federal Developments

    TSCA/FIFRA EPA Extends Comment Period For Draft Guidance For Pesticide Registrants On Notifications, Non-notifications, And Minor Formulation Amendments: On October 5, 2017, the U.S. Environmental Protection Agency (EPA) issued a notice of extension of the comment period for the draft guidance  ...


    By Bergeson & Campbell, P.C.

  • Increase in capacity of an incinerator

    In addition to its own and external products, system providers involved in the project business also provide process knowledge and complete projects refined to the last detail. The standard is high. Their own knowledge combined with the supplier’s knowledge leads to a complete solution. From the delivery of the components to their installation, trial operation and commissioning, all the ...


    By sera GmbH

  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • Consensus building and knowledge integration methods applied to technology implementation in the Swiss waste incineration industry

    This paper describes the use of consensus-building and knowledge integration methods to reflect stakeholders' preferences. These methods were applied in a complex decision making process concerned with the implementation of innovative technologies in Swiss waste incineration plants. We described stakeholders' preferences by integrating their knowledge into a multi-criteria evaluation of ...


    By Inderscience Publishers

  • Case study - Perstorp Speciality Chemicals AB,Perstorp, Sweden

    Customer: Perstorp Speciality Chemicals AB,Perstorp, Sweden Project: Chemical Waste Incinerator operating WESP Perstorp AB started up their Chemical Waste Incinerator year 2007. The emission standard to meet stated < 5 mg/Nm3. With a standard as low as 5 mg the natural choice ended up in a WESP. Result The plant has operated ...


    By Envibat AB

  • OMNNI Report of Asphalt Mix Design and Testing

    This report presents the results of asphalt mix design and testing using glass aggregate produced by Minergy. Glass aggregate from the MinergyWinneconne Pilot Plant produced from sediments dredged from the Fox River was used in the design and testing. Two sizes of glass aggregates were used in the asphalt mix designs. One size has a gradation that is naturally produced by the plant during the ...


    By Minergy Corporation Limited

  • Horizontal Mixers for Secondary Combustibles - Case Study

    The manufacture of secondary combustibles from household waste, industrial waste and special waste in accordance with statutory requirements is to be a huge challenge for system suppliers in the coming years. Currently, at times, extremely differing substances are treated in such a way that they can be loaded into conventional furnaces. The most important requirement is the detailed control over ...


    By AVA GmbH u. Co. KG

  • Case study - Catalytic oxidizer catalyst replacement

    Overview A New Jersey pharmaceutical company purchased a thermal incinerator to treat the heptane and hexane exhaust from their capsule wash system. The thermal incinerator"s "tubular" design was modified with a catalyst bed in order to reduce the system"s operational costs. Unfortunately, when operating in the catalytic mode, the oxidizer failed to provide the required ...

  • Case study - LKAB, Sweden

    Customer: LKAB, Sweden Project: WetESP pressurized - Processgases Blast Furnace Year 1997 LKAB installed a pilot Blast Furnace at Swerea- MEFOS, Luleå. The product gas contains both CO and H2. The Blast Furnace operates at 0,8 bar over pressure. The design pressure for the WESP is 1,5 bar. The emission standards for dust are < 10 mg/Nm3. This gave ...


    By Envibat AB

  • Case study - SP, Technical Research Institute of Sweden

    Customer: SP, Technical Research Institute of Sweden Project: WetESP for Fire Laboratory Many fire tests are made in full scale. Example for fire tests can be engine rooms, vehicles, store houses, compartments etc. Most of the tests will include ignite phase, full fire and extinguishing. The ignite phase is sooting, full fire will give high temperatures ...


    By Envibat AB

  • Case study - SP Fire Laboratory, Sweden

    Fire laboratory at SP Borås uses EnviBat’s Wet Electrostatic Precipitator technology (WESP) since 2007. Extremely low emissions and high availability are key advantages. Project: WetESP for Fire Laboratory Many fire tests are made in full scale. Example for fire tests can be engine rooms, vehicles, store houses, compartments etc. Most of the tests will include ...


    By Envibat AB

  • Sustainability Trends from NAEM: Zero Waste, Water Efficiency, and More

    Sustainability conferences give attendees a valuable opportunity to learn about industry trends directly from the companies that are leading the way! It’s safe to say that attendees learned a lot last week in Milwaukee, Wisconsin at the 2016 NAEM Sustainability Management ...


    By Intelex Technologies Inc.

  • Dry/Wet Scrubbers for Clean Air Compliance

    Air-scrubbing venturis and towers may be the answer to clean air compliance for small- to medium-sized companies. Forthcoming requirements of the Clean Air Act Amendments of 1990 will inventory many more specific chemicals considered hazardous. From acetaldehyde to xylenes, the list regulated under the air taxies program includes 189 hazardous air pollutants (HAPs). That number may ...


    By CR Clean Air Group, LLC

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Chemical Mfg. Plant Avoids Long Term Shut Down with Thermal Oxidizer

    Recently, Catalytic Products International (CPI) worked with a customer who determined during a routine plant inspection that they had unexpected emissions from their process. This can happen as regulations change and as plants continue to improve operations or even change products or processes.  In this case, the customer voluntarily ...

  • Environmental Assessment of Municipal Waste Management Scenarios: Part II Detailed Life Cycle Assessments

    The European Commission’s Strategy on the Prevention and Recycling of Waste outlines why life cycle thinking is essential in the move towards more sustainable consumption and production. The importance of life cycle thinking is further highlighted in the Commission’s complimentary Strategy on the Sustainable Use of Natural Resources, in its Integrated Product Policy, as well as in the proposed ...


  • Making manufacturing more sustainable - Subcommittee E60.13 lays groundwork for standards

    A new ASTM International subcommittee has begun work on standards that address sustainable manufacturing. Sometimes zero is not zero. Case in point: Manufacturer X sends no byproducts or waste to landfills or to incinerators. Manufacturer Y doesn’t dump waste in landfills, yet it does opt to burn refuse for energy. Both claim they have “zero landfill” programs. ...


    By ASTM International

  • CEMS: An Overview

    We've written an overview to where CEMS are required, types of site that require CEMS and future requirements. Continuous Emissions Monitoring Systems are used to continuously collect, record and report data from industrial process operators that produce emissions to air. CEMS are used as a means to comply with ...


    By a1-cbiss

  • Pallets to Garden Products: Value-added Wood Recycling Works

    A business venture of St. Paul’s Neighborhood Energy Consortium demonstrates reuse can generate as much as $3,000/ton. AT ANY MOMENT, there may be over two billion wood pallets in circulation throughout the United States, half of which are used only once. Others are reused over longer periods of time, but eventually almost all — nearly 300 million in the U.S. last year — wind up in the waste ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you