industrial air Articles

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

  • Using Electromagnetic induction to characterize soils - Case Study

    Electrical conductivity measurements have been used for years to determine salinity and moisture in soils. Probes were inserted directly into the soil to determine how well the soil conducted an applied current. This process was slow and labor-intensive and was usually reserved for scientific studies. A more recent technique for measuring conductivity is electromagnetic induction (EM), a ...


    By Geonics Limited

  • Improving Winery Lagoon Performance & Efficiency - Case Study

    Overview A winery in California faced the challenge of optimizing and treating their wastewater pond in a sustainable manner. The winery had brush rotors frequently breaking down, which were very difficult and time consuming to repair. They were seeking a more reliable option. Aeration Industries International provided that solution in more ways than one. ...

  • Choosing the Right H2S Analyzer for Your Specific Application

    Not all H2S analyzers are created equal, and certain H2S analyzers work better on different applications than they do others. Significant amounts of time, money and headaches can be saved by learning about the different H2S analyzer principles of operation and choosing the correct analyzer for your ...


    By Analytical Systems Keco

  • Tire Shredding: The Best Alternative

    From cars and trucks to planes, tractors, and forklifts, tires are used for a wide variety of vehicles. And those tires don’t last forever. Regardless of how many miles a tire travels, it should not be used longer than ten years past its manufacture date, as the rubber will grow brittle and can crack. This isn’t usually a problem, though, since most tires are replaced within three or ...


    By ECO Green Equipment

  • Environmental Profile of the Air Transportation Industry

    Introduction The EPA's Office of Compliance has developed a series of profiles or notebooks containing information on selected major industries. These notebooks, which focus on key indicators that holistically present air, water, and land pollutant release data, have been thoroughly reviewed by experts from both inside and outside the EPA. What will you find in this ...

  • Clearing the air: the use of bio-oxidation for industrial air emissions control

    The wood products industry began rather ardous road to emissions control in the early 1990s with the first installation of a thermal oxidizer (an RTO) at a California MDF facility, for volatile organic compound (VOC) control. During the ensuing years, virtually every panel board facility has had to control emissions of VOCs, and up until the last few years, always with some sort of thermal ...


  • Industrial Hygiene: Quality Assurance In Air Sampling and Analysis

    Industrial hygiene is the recognition, evaluation, and control of chemical, physical, biological, and ergonomic stresses in the workplace. Of the stresses listed, chemical stresses in the form of air contaminants are the most common. Air contaminants, their PELs and TLVs, and how to sample for them, is Industrial Hygiene 101 for most industrial hygienists. However, as simple as sampling and ...


  • The Spectrex air sampler ideal for industrial hygiene.

    Comments by an industrial hygiene supervisor in Texas "The Spectrex PAS-500 is a great tool for collecting both personal and area air samples. I have yet to have a worker complain about having to wear the pump. The workers appreciate the drastic reduction of weight and size when compared to the traditional low volume pumps. The best advantage of the PAS-500 is the clip that holds the pump ...


    By Spectrex Corporation

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

  • Effects of industrial air pollution on the respiratory health of children

    There is growing concern regarding to the possible effects of air pollution on respiratory health of children in Eleme industrial area of Port-Harcourt Nigeria. A total of 250 children were sampled from six primary schools with pre-nursery facilities for a period of 18 months. Subjects were divided into two zones (A and B), monitored and examined on weekly basis. The effects of four criteria ...

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • News on Air 2013: Special Edition for Petrochemical Industry

    This volume features Air Monitoring products that are used the petrochemical industry to ensure worker and community safety.  Supelco's air monitoring products are useful for sampling of indoor (workplace) air and ambient air for a wide variety of analytes, such as aldehydes, volatile organic chemicals (VOC), benzene, toluene, ethyl benzene and xylene (BTEX) and other polyaromatic compounds ...


    By Sigma-Aldrich Co., LLC

  • ADMS-Urban: an air quality management system for traffic, domestic and industrial pollution

    The new version of the Atmospheric Dispersion Modelling System for urban environments, ADMS-Urban, is based on the same up-to-date physics as the ADMS model, outlined briefly here in Section 2. The basic model has been the subject of extensive validation studies: as part of this series of European Harmonisation Workshops; sponsored by HMIP (Her Majesty's Inspectorate of Pollution, now part of the ...


    By Inderscience Publishers

  • Costs of air pollution from European industrial facilities 2008-2012

    In 2011, the European Environment Agency (EEA) published a first assessment of the costs of air pollution caused by European industrial facilities. The report Revealing the costs of air pollution from industrial facilities in Europe (EEA, 2011) applied a simplified modelling approach to assess the damage costs to health and the environment in 2009, caused by pollutant emissions from industrial ...

  • Application of the MELPUFF model to air quality assessment in the industrial area of Huelva (Spain)

    The mesoscale Lagrangian puff dispersion model (MELPUFF) has been used in air quality assessment in the area of Huelva. The Huelva area is highly industrialised and it is located on the Atlantic coast of southern Spain. The MELPUFF model was applied to obtain monthly-averaged distributions of SO2 and number of probable exceedances per month of the EU air quality standards. The study period ...


    By Inderscience Publishers

  • Rule Changes for the Natural Gas Industry - Air Pollution Abatement Technology

    Changes were published in the 2012 and affect oil and natural oil and natural gas processing; Federal Register on August 16, gas exploration & production; natural gas transmission. Last year EPA finalzed regulations that affect the oil and natural gas industries in a variety of areas. These rules cover the following industry sectors: oil and natural gas exploration and production; oil and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you