industrial air engineering Articles

  • Optimizing VOC Combustion - Case Study

    Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. ...

  • What`s Hiding in Your Waste Piles?

    In over 25 years in the grinding and recycling industry, we’ve learned that there’s always more than meets the eye in a pile of waste materials. Whether it’s a pile of pallets or household garbage, there’s some good and some bad hiding under the surface. It's there if you know how to find it. You can find it with the right industry knowledge, the right equipment, ...


    By Rotochopper, Inc.

  • Citizens, engineers and air toxics: citizen participation in technology based standard setting

    This article analyses the potential for involving state and local citizen groups in technology-based standard setting for air toxics under the l990 US Clean Air Act. Congress hoped that by focusing on technology rather than risk that the standard setting process would be less contentious. This has not turned out to be the case. There are a number of points where scientists and engineers make ...


    By Inderscience Publishers

  • An ecological engineering system model applied to the case of an integrated agro-industrial complex

    Intensive stock breeding namely swine, beef and dairy cattle and related activities are characterised by an enormous pollution potential. Without suitable treatment, this kind of waste with high levels of organic matter, nutrients, heavy metals and pathogenic microorganisms originates air, water, soil and food chain contamination. The removal or the reduction of the pollutant matter contained in ...


    By ORBIT e.V.

  • How to certify aero engines

    Aircraft Engine Noise Certification PowerJet, formed as a joint venture between Russian OAO NPO Saturn & French SNECMA (SAFRAN Group), have designed and built the new SaM146 turbofan engine selected by the Sukhoi Civil Aircraft Company to power its Superjet 100 aircraft family. The Sukhoi Superjet 100 is a medium-haul airliner developed in collaboration with Alenia Aeronautica (Italy), and ...

  • Air pollution and odour control treatment plant of contaminated air during industrial drums and package remediation process

    Customer EuroVeneta Fusti srl is an italian market leader in industrial drums and package recovery, remediation and reuse. Sited in Triveneto, in Mira next to Venice, EuroVeneta Fusti operates old drums collection, processing, regeneration and new ratification of industrial packages (such as ...


    By F.G.M. engineering srl

  • ESTECH Corporation - engineering solutions and technology

    20 Years of Success and a New Facility On 1 September 2009, ESTECH Corporation (in Japanese, Kabushiki Kaisha ESTECH) Engineering Solutions & Technologies opened the doors of its new testing facility, and at the same time celebrated 20 years since its inception in 1989. Situated less than 20 km from Yokohama and 40 km from the centre of Tokyo, the two storey, 670m2 test facility ...

  • Thermal oxidizer: Major engineering company

    The Problem A Major Engineering Company approached Epcon for a large Oxidizer System with 25,000 - 35,000 SCFM Afterburner for their Continuous Cord Resin-Impregnating manufacturing plant. The engineering company had no idea about the operating costs and they were primarily concerned with working through a lawyer that was representing this company with the State Agency. This particular ...


    By Epcon Industrial Systems, LP

  • Next, the air car?

    Vehicles account for 26% of the nation’s carbon dioxide emissions, and 51% of the average household’s daily CO2 output (http://www.fueleconomy.gov/feg/climate.shtml), according to the U.S. Environmental Protection Agency. So, clearly fuel economy is critical to reduce greenhouse gas emissions.Big car manufacturers, like GM, Ford and Toyota, have seen ...

  • Industrial hygiene case study

    Service performed: Industrial hygiene monitoring at a pharmaceutical manufacturing facility Summary: Our environmental staff performed testing and consulting to determine employee exposure levels to hazardous chemicals at a large manufacturing facility. Engineering controls and personal protective equipment were also evaluated for its effectiveness during the ...


    By EFI Global, Inc.

  • Industrial Laundry-4

    This facility washes heavy industrial rags and towels from furniture manufacturing, ink roll towels, automotive and other operations. The wastewater process uses flow equalization for the 60,000 gpd flow, pH adjustment with sulfuric acid, coagulation, metal precipitation, flocculation followed by dissolved air flotation. The facility had difficulty meeting the effluent metals for Copper (1.5 ppm) ...


    By Integrated Engineers Inc.

  • Air Emissions from the automobile manufacturing industry: a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


  • Emissions Test Report - Gas Compressor Engines

    INTRODUCTION In 2004, Northeast Texas Air Care (NETAC) commissioned a pilot project to demonstrate the effectiveness of available ...


    By DCL International Inc.

  • Air emissions from the automobile manufacturing industry a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


  • Chemical Engineering Magazine Article: Chemical Lifecycle Management

    Chemicals in production and laboratory environments alike have three distinct lifecycle phases: the first is procurement and inventory storage; the second is use in a manufacturing process or research program; and the third is post-use, including onsite handling, removal and beneficial reuse, recycle or disposal. A number of considerations including regulations, safety, material utilization ...


    By Clean Harbors

  • Microturbines, Gas Engines Link Biogas to the Grid

    OPPORTUNITIES to produce electricity from methane are being improved continuously as manufacturers introduce new and upgraded equipment to address market needs and varying characteristics of raw biogas. In the renewable energy from organics recycling arena, the two primary types of electricity generation equipment are microturbines and reciprocating gas engines. This article provides a brief ...


    By BioCycle Magazine

  • HP, Israel - Sialex helping keep air quality “just right” in Israel’s Hi-Tech industrie case study

    Air quality must be kept within tight tolerances when working with printed circuit board assemblies (a key process in the manufacture of Hi-Tech print engines). Too little moisture in the air in the production hall results in an “electrostatic” build up which can lead to “shorting” of circuit boards. Water vapor is introduced into a production hall through a system of ...


    By Phoenix Ring Manufaktur UG

  • Biofilter Applications in the Coatings Industry.

    Soaring energy costs and the high cost of ‘end-of-pipe’ pollution control equipment has caused companies and regulatory agencies to re-evaluate ‘unconventional’ means of achieving VOC and HAP emissions control. The coatings industry is an excellent candidate for alternative, unconventional controls, as VOC and HAP reductions have not been as strident as has been the case in many other industries. ...


  • Intro to Industrial Hygiene

    Let's take a peek behind the curtain of one of our practitioner specialties--industrial hygiene. Read on for an interview with one of Antea Group's experienced pros. What is Industrial Hygiene? Industrial hygiene is a science and art devoted to the anticipation, recognition, evaluation, prevention, and control of those environmental factors or stresses arising ...


    By Antea Group - USA

  • Industrial Sludge Wastewater Treatment

    Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve Bacteriological ...


    By Integrated Engineers Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you