industrial air pollution abatement system Articles

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Controlling Stack Emissions in the Wood Products Industry & Wood Fired Boilers

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...

  • Emission Control Strategies and Technologies for the Chemical Processing Industry: An interview with Chris Anguil

    AC: Could you please provide our readers with a brief introduction to the industries that Anguil Environmental works within? CA: Our thermal and catalytic oxidizer systems are applied on any industrial process that is regulated for Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs) or Nitrogen Oxides (NOX). Some of these industries include chemical ...

  • QUADRANT SR Thermal Oxidizer & the chemical industry - Case study

    Chemical processing facilities across the country are facing ever tightening restrictions for volatile organic compound (VOC) and hazardous air pollutant (HAP) emissions. These emissions can be generated from such points as process vents, storage tanks, fugitive releases, among others…. To achieve compliance with Clean Air Act Amendments, facilities may have to apply maximum achievable ...

  • Cost-Effective Activated Carbon Adsorption System Addresses VOC Emissions for Circuit Board Manufacturer

    PHOTOCIRCUITS manufactures printed circuit boards, primarily for automotive use in motor vehicle dashboards and personal computers with manufacturing facilities in Glen Cove, NY and Peachtree City, GA.  Photocircuits is the largest industrial company in Glen Cove and one of the largest manufacturers of printed circuit boards. As its facilities and output grew, Photocircuits continued its ...


  • What you need to know about mercury emissions monitoring

    Gasmet Technologies (Finland) has published a new White Paper on the monitoring of mercury emissions to air from industrial processes. The Paper provides an overview of current initiatives to reduce mercury emissions and explains how continuous mercury emissions monitoring can help inform process control and the efficient operation of pollution abatement equipment, whilst also demonstrating ...


    By Gasmet Technologies Oy

  • Nitrogen Oxide Technology Gives American Superconductor an Economical, Environmentally Friendly Treatment Solution

    Untitled Document The installation of Bionomic Industries Inc.'s (Mahwah, NJ) innovative ScrubPac™ BIONOxSOLVER abatement system is enabling American Superconductor ...


    By Bionomic Industries Inc.

  • Nitrogen Oxide Technology gives American Superconductor an economical, environmentally friendly treatment solution

    The installation of Bionomic Industries Inc.'s (Mahwah, NJ) innovative ScrubPac. BIONOxSOLVER" abatement system is enabling American Superconductor Corporation to treat the nitrogen oxide (NOx) emissions from a calcination process at its new, high temperature superconductor manufacturing facility (Devens, MA), in a cost-effective, environmentally responsible way. Bionomic Industries' ...


    By Bionomic Industries Inc.

  • The Greening of Carbon Fibre

    Carbon fiber is a material that has, and will continue to revolutionize the products we use every day by making them stronger, lighter and more durable.  Experts estimate that the specialty material is twice as stiff as steel and five times stronger, per unit of weight.   It is made from organic polymers which consist of long strings of molecules held together by carbon atoms.  The ...

  • Wet Electrostatic Precipitation Demonstrating Promise for Fine Particulate Control

    Editor’s Note: Part l of this two-part feature on wet electrostatic precipitation (wet ESPs) outlines the need for multi-pollutant air pollution control technologies, the basics of wet and dry electrostatic precipitation, the ability of wet and dry ESPs to treat fine particulate, and the use of wet ESP technology at Northern States Power Company’s Sherco Station. Part II will explore the key ...


  • Case study - Amine tail gas treatment

    COVERING YOUR TAIL GAS The discovery of new shale formations throughout the world and the development of new drilling technologies have increased natural gas production and prompted government agencies to instigate tighter air-pollutioncontrol regulations on processing operations. Unfortunately, meeting environmental regulations is not a profit-generating endeavor. Simply put, the time ...

  • CPI Installs Catalytic Oxidizer at Pharmaceutical Mfg Company

    Catalytic Products International (CPI) recently completed the installation of a new VECTOR Series Catalytic Oxidizer (CatOx) at a Western USA manufacturer of pharmaceutical products for the abatement of Volatile Organic Compounds (VOCs).  ...

  • Sustainable odour control in urban environments

    Abstract With an ever increasing focus on sustainability, the municipal recycling sector is increasingly locating recycling facilities in urban environments to be closer to their waste sources. The odour control industry needs to respond in providing ever more efficient odour extraction technologies to minimise any odour nuisance to their residential community neighbours. ...

  • Comparative Risk Assessment

    ' Comparative risk assessment provides a systematic way to compare environmental problems that pose different types and degrees of health risk. It combines information on the inherent hazards of pollutants, exposure levels and population characteristics to predict the resulting health effects. Using data from available sources, rapid, inexpensive comparative risk assessments can identify the most ...


    By The World Bank

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Compliance Issues Facing Midstream Production - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. This is good news for the country and our environment. ...

  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • Selected publications by IVU Umwelt staff in English

    Diegmann, V.: Modeling PM2.5 hot-spot concentrations in practical applications from a consultant's view. Workshop "Measurements and Modelling of PM2.5 in Europe", 23.-24.4.2009 in Bilthoven, The Netherlands. Organizers: Netherlands Environmental Assessment Agency (PBL). 2009.Diegmann, V.; Gäßler, G.: Air Quality Management - From Traffic Management to Environmental Traffic Management. Abstracts ...


    By IVU Umwelt GmbH

  • Optimizing Wastewater Treatment

    ' Growing volumes of both industrial and municipal wastewater are being discharged to surface waters but the treatment provided frequently is inadequate to protect the desired uses of the receiving waters. With limited resources in terms of both institutional capacity and finance, governments face difficult choices in optimizing their investments in municipal systems and establishing practical ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you