industrial combustion analyser Articles

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • Detailed chemical modelling of a flameless combustion turbine for pollution prevention

    Flameless combustion has been acknowledged as one of the most interesting combustion technologies to meet both the targets of high process efficiency and low pollutant emissions. The present investigation is concerned with the application of the flameless combustion mode to an adiabatic combustor, typically used in gas turbine engines. Detailed chemical kinetics calculations, by means of a ...


    By Inderscience Publishers

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Costs of air pollution from European industrial facilities 2008-2012

    In 2011, the European Environment Agency (EEA) published a first assessment of the costs of air pollution caused by European industrial facilities. The report Revealing the costs of air pollution from industrial facilities in Europe (EEA, 2011) applied a simplified modelling approach to assess the damage costs to health and the environment in 2009, caused by pollutant emissions from industrial ...

  • Cumulative exergetic assessment of LPFO utilised steam boilers

    This paper relates to a study on the energy and exergy resources, transfers, consumption and losses in the combustion and heat exchanging units of industrial steam boilers. Mass, energy and exergy analyses, which included the physical and chemical exergies of material streams, were used to investigate the energy resource utilisation of Low Pour Fuel Oil (LPFO) in industrial steam boilers. The ...


    By Inderscience Publishers

  • Planned or experience-based processes for eco-design innovation: exploring product development driven by environmental performance targets

    Eco-design research suggests that environmental considerations should be integrated with product development with no or only minor changes to existing development processes. These processes are expected to be systematic, predictable and thoroughly planned. This paper explores if this assumption is still valid when requirements on environmental performance call for more innovative product ...


    By Inderscience Publishers

  • Mathematical models validation of aluminium electrolysis process using exergy method

    A new method of validation of the mathematical model of the processes taking place inside the aluminium electrolysis cell has been proposed. The method is based on the comparison of the calculation results of the entropy generation rates obtained in theoretical way with the exergy losses estimated from global exergy balance equation. The following irreversible processes have been analysed - ...


    By Inderscience Publishers

  • Protect your Cooling Cycle

    TOC analyser QuickTOCultra meets the requirements for any cooling water challenge Thermal energy transfer is one of the most important processes within industry. Therefore, monitoring the cooling system is essential for efficient production. For this purpose, several parameters were defined and regulated such the ...


    By LAR Process Analysers AG

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Impact of selected policy measures on Europe`s air quality

    This report was prepared by the European Topic Centre for Air and Climate Change (ETC/ACC) of the European Environment Agency (EEA). The authors of the report were Jeroen Kuenen, Mtinkheni Gondwe, Tinus Pulles (TNO, the Netherlands), Frank de Leeuw (PBL, the Netherlands) and Justin Goodwin (S-ESC, United Kingdom). The EEA project manager was Martin Adams. Dr. Leonidas Ntziachristos (Aristotle ...

  • Short-term variations in ambient particulates and their sources in Taichung, Taiwan

    Ambient particulate measurements were carried out using TE-PUF sampling and a Universal Air Sampler between 8 March and 25 April 2001 at Taichung. Samples were collected every 6 hours beginning at 0100 LST (Local Standard Time) each day at two sites, one at a university campus and the other at a roadside. Chemical species (Cl-, NO3-, ...


    By Inderscience Publishers

  • Newbuild Power Station in Karlsruhe - Case Study

    EnBW is one of the biggest German energy suppliers. A major new build bituminous coal fired power plant construction project is the new boiler number 8 of the Rheinhafen Dampfkraftwerk (RDK) in Karlsruhe. The new boiler will have a capacity of 912 MWel with a heating capacity of 220 MWth. The unit will be erected beside the existing units RDK4s and RDK7 and have a net efficiency of > 46% ...

  • What is Intrinsic safety and ATEX?

    What is intrinsic safety? Intrinsic safety (IS) is a low energy signalling technique that ensures the safe operation of electrical equipment in hazardous areas by limiting the energy – both electrical and thermal – available for ignition. ...


    By Hansford Sensors

  • EPA Proposed “Franken-MACT” for Utilities

    EPA published the highly anticipated proposed Maximum Available Control Technology (MACT) Standard for the utility sector (40 CFR 63 Subpart UUUUU). When considered together with the growing list of proposed and final rules impacting the utility sector (Transport Rule/Cross-State Rule, Coal Combustion Byproducts Rule, Cooling Water Intake Rule, Regional Haze Rule, revised National Ambient Air ...


    By Trinity Consultants

  • Air quality and ancillary benefits of climate change policies

    Untitled Document This report analyses projected changes in European air quality up to 2030. It explores the possible benefits of climate policies on air quality and the costs of air ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you