industrial containment Articles

  • Effective Equipment Grounding

    The quality of the electrical wiring and grounding in a facility containing sensitive electronic equipment is one of the most important and least understood aspects of electrical power systems. Properly designed and maintained wiring and grounding systems are necessary to ensure personnel safety and protection of data and telecommunications equipment. Effective grounding creates an electrical ...


    By EPG Companies Inc.

  • Ninth Circuit Denies Motion for Further Mandamus Relief in Chlorpyrifos Proceedings

    On July 18, 2017, a panel of three judges at the U.S. Court of Appeals for the Ninth Circuit issued an order denying petitioners’ Pesticide Action Network North America (PANNA) and the Natural Resources Defense Council (NRDC) (Petitioners) Motion for Further Mandamus in the chlorpyrifos proceedings.  In that motion, Petitioners asked the court to grant further mandamus relief, ...


    By Bergeson & Campbell, P.C.

  • Oxygen Monitors now Required for Nitrogen, Argon, Helium, and CO2 use in Denver

    The Colorado city of Denver recently passed a new law that requires facilities that use insert gas to install oxygen deficiency monitors wherever these gases are used in excess of 100 pounds. Learn what the new law requires from businesses and how an oxygen sensor protects your employees, your business, and your peace of mind.  What Denver's New Law Requires  The law ...

  • Aquaporin Hollow Fiber FO Membrane Modules (AQPHFFO2)

    Aquaporin hollow fiber membrane modules for forward osmosis studies are now available from Sterlitech. AQP HFFO2 is a cross flow membrane module containing Aquaporin Inside hollow fiber membranes. With an Aquaporin Inside coating on the interior surface of the hollow fibers (lumen side), the feed solution is circulated in the lumen and the draw solution is circulated in the shell. ...


    By Sterlitech Corporation

  • Innovation and efficiency at the forefront of long-standing partnership

    Wiltshire-based Malaby Biogas operates one of the few independent anaerobic digestion (AD) plants in the UK, specialising in the diversion of food waste from landfill. Its Bore Hill Farm Biodigester provides a combined waste disposal and energy generation solution in one safe, clean and highly-efficient process and the facility has gained a wide-ranging ...


    By Geotech

  • Maintenance Tips: Thermocouples

    Keeping air pollution control equipment properly maintained is essential for meeting regulatory requirements and efficient operation. Here on the CPI blog, we regularly share tips on maintaining your systems, which requires replacing components on a yearly basis. Today we're taking a closer look at the importance of replacing ...

  • Spill Containment, Industrial & Environmental Solutions

    ULTRA-EVER DRY is a superhydrophobic (water) and oleophobic (hydrocarbons) coating that will completely repel almost any liquid. Ultratech EverDry uses proprietary nanotechnology to coat an object and create a barrier of air on its surface. This barrier repels water, oil and other liquids unlike any coating seen before. Technical Information:  ...


    By Interstate Products Inc

  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • Container and Flat Glass Manufacturing

    Glass Melting Furnaces. Applications where several pieces of conventional equipment struggle to attain only marginal efficiency provides an opportunity for the Cloud Chamber Scrubber (CCS) to showcase its unique capabilities as a multi-pollutant device. Container / float glass manufacturing is a typical example. Following other successful applications in the glass industry, a pilot study to ...


    By Tri-Mer Corporation

  • Cleaning mold containing surfaces

    Once a determination is made that a moldy surface can be cleaned instead of removed or demolished, what cleaning agents are effective in removing or killing the mold? Many factors influence the selection of a cleaning agent. 1). The type of surface to be cleaned: Is it porous? Hard such as cement or sheetrock? Soft, such as cloth, fabric or wallpaper? Absorbent and thick such as rugs, ...

  • Technical brief - containment for industrial services in marine, offshore & petrochemical sectors

    Conventional scaffold sheeting is an established method of providing temporary containment and weather protection for scaffold structures.  Material selection should reflect the application, the anticipated weather conditions and the expected duration of the project.  Furthermore, stringent Flame Retardant requirements for covering materials are specified on most projects. There are ...

  • Security & Collection Containers That Make Sense!

    Profiling the industry’s top manufacturers of document & tape collection and storage containers ...

  • Assessment of hydraulic containment of a landfill site

    Client: Waste Management Industry Location: Hydraulically contained landfill site, UK Services: Data review, hydrogeological risk assessment, hydraulic containment. Issues: Potential risk to groundwater and surface water, environment and human health. Leachate level control and trigger level compliance. ...

  • EPS Food Containers Can be Recycled

    EPS food containers can be recycled. In our daily life, we can see vast majority of EPS food-service products are used in commercial districts. However, there is no collection of EPS for recycling, as EPS food containers are typically not “clean” enough to be recycled. Plus, the high costs of collecting, sorting, and transporting this big volume EPS make the ...


    By Harden Industries Ltd.

  • Wasteless Methods of Phenol Containing Industrial Waters Purification and New Modification of the Method of the Analysis of Phenolic Toxicants

    Effective methods of purification of phenol industrial wastewaters and wastes based on the different chemical phenol transformations to insoluble in water low toxical compounds with some valuable properties have been discovered. Chemical method of dephenolation using sulfochlorides may be applied for purification of industrial waters with any initial phenol concentration. Condensation method is ...


  • Use of ozone in the treatment of cyanide containing effluents

    The treatment of effluents of the gold and silver cyanidation process is one of the main problems that the precious metals industry faces. These effluents contain variable quantities of free cyanide, weak complexed cyanide, strong complexed cyanide and thiocyanate. Different methods are used for the removal of cyanide but most of the times the consumption of reagents raises the operation cost to ...


    By Absolute Systems Inc.

  • EcoloBlue Emergency A.C.E. Container - Water From Air

    At EcoloBlue, we are trying to raise awareness about our All Contained Emergency (A.C.E. Container) solution in a 40ft container. It is a self contained, powered, water generation, and bottling system (600 to 1000 260ml pouches per hour) that provides up to 2,000 liters of pure drinking water daily from the Humidity in the Air. EcoloBlue’s A.C.E. Container is designed for solutions such as ...


    By EcoloBlue

  • Oxidizer Media Replacement Restores Performance for Containers-Manufacture

    Operating Issue A manufacturer of metal containers encountered major operating problems with their Eisenmann 40,000 SCFM Regenerative Thermal Oxidizer (RTO) that hindered their production performance and caused major concern regarding an upcoming air compliance test. The overall pressure drop across the system was high and the pressure imbalances negatively impacted their process ...


    By Pollution Systems

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Recyclers help to cut huge container imbalance

    The Port of Rotterdam Authority is housed in an office building with probably the most stunning view over Rotterdam. From the top floor, visitors have a breathtaking view on the many barges which are travelling along the busy river, the Erasmus bridge and the skyline of Europe’s main port.  Speaking about the importance of ports and harbours to the recycling industry, Victor Schoenmakers, at ...


    By Recycling International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you