industrial cooling water Articles

  • Determining Proper Cooling Tower Size

    To maximize water-based cooling tower benefits, the appropriate tower size must be selected, requiring the identification of several critical factors. Cooling towers are a relatively inexpensive and reliable way of expelling heat from a number of industrial processes, including nuclear & thermal power plants, petroleum refineries, petrochemical plants, food processing plants, as well as HVAC ...


    By Delta Cooling Towers, Inc

  • Water treatment in the industrial cooling systems

    Protect your installation against corrosion, sedimentation and biological growing. AZUD filtration solutions remove a high percentage of the suspended solids in water, making easierthe maintenance labours of the installation and reducing the energy ...


    By Sistema Azud, S.A.

  • Industrial cooling water fouling by Dreissenidae

    Together with the cooling water, a wide range of living organisms is entrained into cooling water systems, which can readily colonise the available surfaces in the system. Growth conditions in the cooling water system often are ideal for sessile organisms: the steady water flow assures abundance of nutrients and oxygen, while access for predators is limited. The consequence of this is that ...


    By Aquator B.V.

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Cooling Tower Blowdown Water

    Comparison of electrolytic oxidation v. ozone as biocide and reducing rate of TDS build-up in Cooling Tower Blow Down Water. Performed by Pureflow PtY Ltd of Singapore at Singapore Polytechnic Institute. Open evaporative cooling systems have been widely used throughout industry to remove heat from process systems and modern buildings for the purpose of air conditioning. As a result, due to this ...


  • Bacterial community structure in cooling water and biofilm in an industrial recirculating cooling water system

    Microbial fouling is a serious problem in open recirculating cooling water systems. The bacterial communities that cause it have not been fully understood. In this study, we analyzed the community structure of free-living bacteria and particle-attached bacteria in cooling water, and bacteria in biofilm collected from the wall of the water reservoir in an industrial recirculating cooling water ...


    By IWA Publishing

  • Locating Leaks for Cooling Water Systems

    This article illustrates how to locate leaks on cooling water systems in loud, industrial environments like Nuclear or Coal power generating plants without digging or putting anything inside the pipeline.  Infrared-Energy Pattern Analysis (IR-EPA) works on all pipeline sizes and all pipeline materials because it identifies the water outside the pipeline instead of listening for leak noises ...


    By EnTech Engineering, Inc

  • Integrated process control for recirculating cooling water treatment in the coal chemical industry

    This work focused on the integrated process of the recirculating cooling water (RCW) treatment to achieve approximate zero emission in the coal chemical industry. The benefits of fractional and comprehensive RCW treatment were quantified and qualified by using a water and mass balance approach. Limits of cycle of concentrations and some encountered bottlenecks were used to ascertain set target ...


    By IWA Publishing

  • Water treatment helping cars stay cool - automotive industry: Orlando, Florida

    A manufacturer of air-conditioning line connectors for automobiles was required by the city to meet new sewer discharge standards. They had been using a system of gravity separation which did not address suspended solids or soluble metals. Their wastewater is generated from 3 sources; mop water, parts deburring and polishing, and floor scrubber water. They generate approximately 6,000 gpd of ...


    By CETCO Energy Services

  • How to Increase Your Industrial Cooling Tower Efficiency

    Although cooling towers are generally some of the most cost-effective cooling mechanisms as compared to other cooling technologies (such as many dry air cooling systems), it is still important to monitor your industrial cooling tower efficiency and run it as seamlessly as possible. This will ensure your facility can: Save energy Reduce the amount of ...


    By SAMCO Technologies, Inc.

  • The Use of Ozone in Cooling Towers

    Ozone has been successfully applied to industrial cooling water systems with the resultant improvement in operational efficiency due to increased heat transfer, reduced system corrosion, improved environmental impact and reducedon-going chemical expenditure. The aim of this paper is to provide practical advice on the options available for the application of ozone and the potential benefits which ...

  • Process Cooling Case Study

    Forsta Filters a Los Angeles-based manufacturer of water filtration systems used in industrial, municipal and irrigation applications, has installed one of its self-cleaning systems at a 70-year-old company specializing in protective packaging materials for fresh fruits and vegetables. Michelsen Packaging Co. in Yakima, Wash., had just installed a 125 hp water-cooled air compressor that required ...


    By Forsta Filters Inc.

  • Bypass filtration in open circulating cooling water systems

    An open circulating cooling system is a method to remove process heat and is applied frequently for industrial purposes. In these systems heat is removed by evaporation of water to the surpassing air in the cooling tower. However there are some environmental disadvantages such as addition of chemicals to prevent the cooling water system from microbial growth and corrosion. The application of ...


    By Paques B.V.

  • Cooling Tower Drift Elimination

    ABSTRACTIn certain cases cooling tower drift (mist) can overwhelm conventional lower efficiency chevron mist eliminators.  This paper explores an alternative strategy to control drift in those cases.  The author uses a case history to illustrate conditions that can be expected to cause uncontrolled drift and to discuss a solution.  The author acknowledges that the information presented is ...


    By Kimre, Inc.

  • Hospital cooling tower application

    The Challenge: One of the largest teaching hospitals in Illinois wanted to improve safety and “green” operations in their cooling tower water treatment chemical regimen without sacrificing effectiveness. The Solution: Replacement of bulk bleach with on-site generated MIOX® mixed oxidant solution, Earthwise reduced the hospital's liability from ...


    By MIOX Corporation

  • BHP Billiton - cooling water treatment & solids filtration

    Client: BHP Billiton Douglas CETCO Oilfield Services was requested to supply a water treatment package to treat heavily contaminated water in-line. Consequently CETCO’s equipment had to operate at pressures of up to 15.5 bar and temperatures of 120°C. Following lab bench studies and a technical onsite evaluation, CETCO modified an existing RFV 3000 adsorption skid to carry out this unique closed ...


    By CETCO Energy Services

  • Cooling & Drinkingwater: ATP monitoring of biomass growth in waters

    Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol. Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial ...

  • Cooling tower case study

    Cooling towers have always been difficult to control. Algae grow in the cooling tower itself and on the grids used. In addition to micro-organisms and biofilm, they reduce the efficiency of the cooling tower. Furthermore the risk of spreading Legionella is a serous factor to be reckoned with. Many of the traditional methods to fight algae are either insufficient, cumbersome, environmentally ...


    By LG Sonic

  • Protect your Cooling Cycle

    TOC analyser QuickTOCultra meets the requirements for any cooling water challenge Thermal energy transfer is one of the most important processes within industry. Therefore, monitoring the cooling system is essential for efficient production. For this purpose, several parameters were defined and regulated such the ...


    By LAR Process Analysers AG

  • How industrial air-cooled chiller rentals benefit you

    Summer will be here before you know it and with it will come soaring temperatures. Few other states know heat and humidity like the southern states, and going without cool air is simply not an option for their hardworking residents. For the people in these states, an industrial air-cooled chiller is a useful and viable option to keep ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you