industrial drain cleaning equipment Articles

  • M-Coating – drain & sewer spraylining the economical solution to manhole shaft renovation

    M-Coating – Procedure for renovating a manhole shaft using ERGELIT Kombina KS M-Coating is a new, innovative renovation technique for both round and rectangular drainage shafts from 500mm to 1200mm. It is based on over 15 years of the Hermes company’s experience. Using this centrifuge spray technique, walls of shafts up to 10 metres deep can be coated to a realistic thickness. ...


    By HERMES Technologie Ltd.

  • Heat Pump Used to Drain Contaminated Sludge in a Steel Factory

    Summary In 1987, new regulations required that factories dispose of their contaminated water and waste themselves. Making galvanised steel wire, the Stelfil factory produces sludge contaminated with lead and zinc. Stelfil spent thousands of dollars to bury this waste and evaluated three systems to remove most of the water: a gas dryer, an induction heated screw conveyor and a heat pump system. ...


  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

  • Cleaning & maintenance management

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury’s hidden danger also lies in when at room temperature and exposed, it vaporizes readily. Once it has become an aerosol, it is absorbed into the lungs and ...


  • How Important Mobility in Car Wash Equipment?

    If you own a mobile car wash business, it is required that your car wash equipment is designed specifically for easy transportation. Bulky machines are suitable for fixed location car washes, but when you need to spend the entire day traveling across the city to different clients, you need car wash equipment that is mobile and corrosion/chip resistant, to keep the system looking like new even in ...


    By Daimer Industries Inc.

  • Does Your Mobile Car Wash Equipment Have the Right Flow?

    When looking for the right kind of mobile car wash equipment, most people look for units that are effective and convenient. Mobile units can make it easy to navigate around different-sized vehicles as well as clean those hard-to-reach areas. When you need to take the detailing job to a client’s residence, a mobile unit is a practical option. Naturally, optimum cleaning efficiency is also a ...


    By Daimer Industries Inc.

  • Lances for Steam Cleaners Improve Grout and Hard Surface Cleaning

    Daimer Industries, Inc.®, a highly-ranked e-commerce supplier of professional cleaning contractors and consumers, announced shipping and product plans for six new add-on accessories for it s KleenJet® line of steam cleaners. The new products include two lances, adapters and accessories for scraping and drain plunging. "Our latest accessories for steam cleaners address a key issue facing ...


    By Daimer Industries Inc.

  • Controlling Scale Deposition and Industrial Fouling

    It costs US industry billions of dollars a year to control and remove the limescale that builds up in industrial equipment such a heat exchangers, evaporative coolers, boilers, chillers and other water fed equipment. Oil wells, for example, face significant scaling problems from the highly mineralized water that are extracted with the oil. Limescale not only increases downtime, maintenance ...

  • Water Jet Floor Cleaning and Effluent Recycling System: SCS Specialised Services

    SCS Specialised Services Pty Ltd has developed a method of cleaning industrial concrete floors which recycles the wash water (the Recovery Jet system). On average, this has resulted in an 85 per cent reduction in the quantity of effluent generated. Background SCS Specialised Services Pty Ltd is a small floor cleaning and protective coatings business, specialising in cleaning ...


  • Mercury spill control procedures - industrial hygiene news

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury’s hidden danger also lies in when at room temperature, when exposed it vaporizes readily. Once it has become an aerosol, it is absorbed into the lungs and ...


  • Petroleum Refining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Medical Industry: Scrubber Eliminates Ethylene Oxide Case Study

    A contract sterilization service uses a single-stage scrubber to convert this hazardous gas to inert ethylene glycol: ETO Sterilization Inc. provides contract sterilization services for hundreds of northern New Jersey customers, concentrating on spices and herbs, cosmetic ingredients and medical supplies. Two of the largest ethylene oxide sterilization vessels in the world are in operation ...


    By CR Clean Air Group, LLC

  • Implementing SPCC Requirements and Storm Water BMPS at a Large Industrial Facility

    ABSTRACTRecently, much attention has been focused on storm water pollution prevention and spill management. The U.S. Environmental Protection Agency (EPA) issued its Final Rule for Oil Pollution Prevention (40 CFR Part 112) on July 17, 2002, making major changes to the original rule issued in 1973. Facilities subject to this regulation must amend their Spill Prevention, Control, and ...

  • Daimer Unveils Carpet Cleaners with Truck Mount Power

    U.S.A – October 12, 2012 – Daimer Industries, Inc.®, supplying the most comprehensive selection of cleaning machines in the industry with over 600 models, has released its USA made XTreme Power® XPH-9600 carpet steam cleaners. The systems offer Daimer®'s low-flow technology, temperatures up to 210ºF within three to five minutes, and heavy-duty, completely ...


    By Daimer Industries Inc.

  • Machine shop for oil and gas services provider wins when the chips are down

    Chip Filtering Keeps Machine Shop Coolant Clean Since 1976, Facility Engineer Jay Wilson has handled the HVAC, electrical, and other operational facility needs for a key Texas-based plant within the FMC Technologies, Inc. (FMCTI) family. This leading global provider of technology solutions for the energy industry and other industrial markets was twice named as the Most Admired Oil and Gas ...


    By Abanaki Corporation

  • Checkweighing Solution for pharaceutical company reduces waste of expensive materials

    The Challenge: A pharmaceutical company needs to ensure that a large stainless steel bin holding drug products is completely empty before washing the bin, since the products often stick to the sides of the bin even after vibrating and hammering the vessel. “The residual material is expensive and represents a loss in revenue for us,” states the customer. Besides, environmental ...


    By Hardy Process Solutions

  • Benefits of Grease Traps for Restaurant kitchens

    Grease traps interceptors are composed mainly to solve the problem linked to grease retain under the drain pipes of the sink of kitchen. The amount of grease is more in restaurants kitchen or in commercial area kitchens as the foam load is no doubt in a great extent than residential ones. Grease trap for restaurant ...


    By Hydra International Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you