Industrial Ftir Monitoring Articles on Environmental XPRT

White Paper & Video on FTIR multigas analysis

Gasmet Technologies has published a free White Paper and a video on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR. Both the video and the White Paper can be found here at www.gasmet.com or by visiting the Quantitech stand 62/63 at AQE 2017. ...

May 2, 2017

By Gasmet Technologies Oy

Using FTIR spectroscopy to measure hydrocarbon pollution in water

According to the World Health Organization (WHO) and UNICEF’s 2015 Progress on Sanitation and Drinking Water report almost 700 million people around the world don’t have access to clean drinking water [1]. Poor water quality is beginning to return to the developed world too. The strain of population growth, intensified agricultural practices and continued industrial expansion have are ...

Jun. 5, 2017

By Specac Limited

FTIR gas monitor for diverse applications

QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...

Aug. 7, 2009

By Quantitech Ltd

FTIR resolution requirements for industrial gas analyses

FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...

May 1, 2013

By CIC Photonics, Inc.

FTIR resolution requirements for industrial gas analyzers

FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...

Aug. 9, 2011

By CIC Photonics, Inc.

FTIR resolution requirements for industrial gas analyzers

FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...

May 1, 2008

By CIC Photonics, Inc.

FTIR becomes best option for multi-gas emissions

Globally, the number of industrial processes and emissions being monitored with Gasmet’s FTIR multi-gas technology has increased enormously in recent years as process managers exploit the benefits of being able to monitor a wide range of gases simultaneously and with minimal maintenance and calibration requirements. Gasmet CEMS (continuous emissions monitoring systems) are used for ...

Jul. 6, 2012

By Gasmet Technologies Oy

FTIR gas analysis improves container safety

Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...

Feb. 22, 2013

By Gasmet Technologies Oy

Pollution monitoring in Cement Industry

The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...

Jul. 24, 2014

By Environnement S.A

High Resolution FTIR Analysis of Carbon Monoxide (CO) Gas

FTIR is being used for analysis of gases in various industries, such as the gas manufacturing industry where it is used for production management, and for gas monitoring in such fields as chemical manufacturing and semiconductor manufacturing, etc. When conducting gas analysis by FTIR, the resolution and gas cell path length must be selected depending on the concentration and peak shape ...

Mar. 31, 2014

By Shimadzu Scientific Instruments Inc

FTIR gas analyzers support management of fire at UK waste facility

The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment ...

Jul. 6, 2016

By Gasmet Technologies Oy

Continous Emission Monitoring (CEMs)

Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona B1.1 | Particulate CEM for wet FGD plant William Averdieck | Managing ...

Apr. 24, 2011

By Energy, Utility & Environment Conference (EUEC)

Emission Testing and Monitoring

Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1 | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein | Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

May 9, 2011

By Energy, Utility & Environment Conference (EUEC)

Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...

Apr. 16, 2014

By Gasmet Technologies Oy

Total solution: Gas and particulate analysis in Cement industry

Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

Oct. 12, 2016

By Environnement S.A

Global solution: Gas and particulate analysis in Cement industry

Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

Oct. 11, 2016

By Environnement S.A

Rugged high speed rotary imaging Fourier Transform Spectrometer for industrial use

Abstract Keywords: FTIR, Spectrometer, Imaging, Fourier Transform, interferometer A new rugged rotary Fourier Transform Spectrometer (FTS) has been developed. It can be used for environmental remote sensing and monitoring of chemical processes. Both single pixel and mosaic imaging configurations have been built and tested. The continuous rotary scan of the ...

Jan. 1, 2001

By D&P Instruments, Inc

Fast, simultaneous and continuous monitoring of NOx and NH3 in DeNOx applications

In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of reagents. To optimize this process, it is essential to use an emissions analysis system for simultaneous and continuous monitoring of NOx and NH3. For preparing ...

Sep. 29, 2016

By Environnement S.A

Application of novel consortium TSR for treatment of industrial dye manufacturing effluent with concurrent removal of ADMI, COD, heavy metals and toxicity

The present study was aimed towards the effective bio-treatment of actual industrial effluent containing as high as 42,000 mg/L COD (chemical oxygen demand), >28,000 ADMI (American Dye Manufacturers Institute) color value and four heavy metals using indigenous developed bacterial consortium TSR. Mineral salt medium supplemented with as low as 0.02% (w/v) yeast extract and glucose ...

May 7, 2015

By IWA Publishing

The Gasmet story from an academic idea to a global business

In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...

Aug. 2, 2013

By Gasmet Technologies Oy

Subscribe to our eBulletins

Add Supplier Profile