industrial gas Articles

  • Why Are CHP Closing All Over The World?

    Burning of coal nowadays has become a big problem. The main reason for this is a rapid increase of mankind. So, China burns half of coal in the world. Since 2000 the share of coal in world energy production has increased from 25 to 30%, and the Chinese economy is responsible for 82% of this growth. In Beijing, it is customary to use ...


    By Lumex Instruments Group

  • Robust on-line monitoring assay - Case Study

    Alkaline Phosphatase Enzyme Activity Measurement as a Robust on-line Monitoring Assay for Water Quality Assessment. Zina Al-Saar 4th year Intern student Avans University of Applied Science - ATGM Department Joep Appels - Supervisor and Managing Director microLAN on line Bio-monitoring System. ...


    By microLAN B.V.

  • Thermal Oxidiser - Scottish Leather Group - Case Study

    Project Details Customer Name: Scottish Leather Group The Brief:  Scottish Leather were sending 30, 000 tonnes of waste to landfill each year. Turn that waste into heat and steam for processing leather and heating water Location of Installation: Bridge of Weir, ...


    By Process Combustion Ltd

  • Do You Need a Microfiltration or Ultrafiltration Membrane System for Your Plant?

    Determining whether or not an industrial plant needs a microfiltration (MF) and/or ultrafiltration (UF) membrane system isn’t always as straightforward as it seems. While these systems are not essential for every industrial process, when thoughtfully implemented within an intake, process, or waste stream, they can go a long way in improving a facility’s efficiency and/or cutting ...


    By SAMCO Technologies, Inc.

  • Optimizing VOC Combustion - Case Study

    Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. ...

  • Minute Flow Tip Video - Mass Flow Versus Volumetric Flow Technology

    When engineers and systems integrators need to measure gas flow rate in an industrial process or scientific research, there are many types of technologies to choose from.  This makes selecting the right gas flow meter a challenge. In addition to technology, engineers must consider many other parameters: price for value, cost of ownership, size of footprint, ...


    By Sierra Instruments, Inc.

  • With its High Pressure Pipeline Environment, Rand Water Provided A Perfect Opportunity to Test New Smartball Insertion And Extraction Equipment

    Rand Water is the largest bulk water utility in Africa and one of the largest in the world, providing bulk potable water to more than 23 million people in Gauteng, parts of Mpumalanga, the Free State and North West - an area that stretches over 31,000 square kilometres. Rand Water’s distribution network includes over 3,300 kilometres of large-diameter pipelines. In 2015 ...


    By Pure Technologies

  • Sustainable Biorefineries: An Important Research Topic

    In recent years, substantial steps into the transition towards a biobased economy have been taken in order to reduce the reliance on imported oil and the emission of greenhouse gases.  As far as Europe is concerned, Sweden, home to theEUBCE 2017 in Stockholm, has been very successful in decoupling GHG emissions from economic growth: from 2000 to 2012, ...

  • Case Study: Monitoring Fuel Treatment with On-Site Fuel Analysis

    Version 8 of our industry leading SpectrOil Optical Emission Spectrometers offers significant performance improvements and enhanced productivity. In particular the sensitivity of the instrument has been improved markedly to allow detection of trace metals down to the part per billion (ppb) level. This capability is particularly important to power generators using liquid fuel, as high levels ...


    By Spectro Scientific

  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • NEC Classifications and Divisions for Hazardous Locations

    Electrical equipment in hazardous (classified) locations present a serious threat for workers due to the existence of explosive dust and vapors. Examples of such facilities range from grain mills and gasoline stations to aircraft hangars and chemical manufacturing plants. To prevent devastating explosions that may occur from the ignition of combustible particles in the atmosphere, the National ...


    By Larson Electronics LLC

  • Life Among The Heavy Metals

    Authors in scientific and applied works interpret the meaning of the concept "heavy metals" in different ways. Today, they include more than 40 chemical elements with an atomic mass of more than 50 atomic units. An important role in the determination of heavy metals is played by the following conditions: their high toxicity in relatively low concentrations, and the ability to bioaccumulation. ...


    By Lumex Instruments Group

  • The Internet of Water Is Saving Lives While Battling Pollution

    The Problem A condition known as Legionnaires' disease has made headlines after it killed a dozen people in Flint, Michigan in 2014 and 2015 and sickened hundreds in  ...


    By Griswold Water Systems

  • Microemulsions for the oil & gas industry

    The S urf acta nt Te ch no log ie s (STL) Group has developed a revolutionary set of new* chemical materials specialising in mcroemulsions technology based on optimised surfactant design bee also SCM, November 2004, pages 32-36). This has overcome some of the drawbacks of conventional chemistries in terms of rational rrofecular design, surfactant chemistry, phase behavbur and physico-chemical ...

  • Fugitive Gas Emissions In The Petroleum & Natural Gas Industry

    Challenge: Fugitive emissions in the petroleum and natural gas industry can come from a variety of sources and are classified as intentional (venting from tanks, compressor vents and stacks) or unintentional (equipment wear and tear, improper assembly, damage or manufacturing defects).  Most of these fugitive gas leaks are considered insignificant or  too small to ...


    By Leak Imaging, LLC

  • Environmental solutions for the natural gas industries

    As domestic natural gas production continues to grow, the industry faces unique air pollution control challenges that require custom-designed solutions. This White Paper examines two aspects of the natural gas exploration and production industry: Production of “frac sand” used in hydraulic fracturing and operation of dehydration units. America‟s natural gas industry continues ...

  • Gas Utilities: Global Industry Guide

    Global Gas Utilities industry guide provides top-line qualitative and quantitative summary information including: market size (value 2010-14, and forecast to 2019). The guide also contains descriptions of the leading companies including key financial metrics and analysis of competitive pressures within the market. Features and benefits Save time carrying out entry-level ...

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • The future of the offshore oil and gas industry

    “The Future of the Offshore Oil and Gas Industry to 2020”. The study, which is an offering from the company’s Energy Research Group, provides an in-depth analysis of the offshore oil and gas industry, highlighting the various concerns, shifting trends and emerging regions in the global offshore oil and gas industry. It provides the current and forecast offshore oil and gas production and reserves ...


  • Gas dispersion modelling harmonisation: an industrial viewpoint

    The harmonisation of gas dispersion modelling across Europe requires not only harmonisation of the physics incorporated into different mathematical models but also harmonisation of the way that practitioners actually use these models. This paper highlights the need to define minimum acceptable standards for gas dispersion modelling, especially in the specification of source conditions and ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you