industrial gas generator Articles

  • Paint & Coatings Manufacturer Selects CPI RTO

    Catalytic Products International (CPI) recently completed the installation of a new TRITON Series Regenerative Thermal Oxidizer (RTO) to a Midwest USA location of a global paints and coatings manufacturer for the abatement of Volatile Organic Compounds (VOCs). ...

  • Recent Federal Developments

    TSCA/FIFRA EPA Extends Comment Period For Draft Guidance For Pesticide Registrants On Notifications, Non-notifications, And Minor Formulation Amendments: On October 5, 2017, the U.S. Environmental Protection Agency (EPA) issued a notice of extension of the comment period for the draft guidance  ...


    By Bergeson & Campbell, P.C.

  • The Next-Generation Water Filter for the Oil and Gas Industry

    Many segments of the oil and gas production industry need improvements in water filtration over traditional methods. This is true because of the trend toward oil and gas production in tighter, less permeable reservoirs and the greater use of enhanced oil recovery (EOR) techniques, many of which involve injecting water into the oil reservoir. To protect the integrity of such reservoirs, the amount ...


    By Eco-Tec Inc.

  • Evolution of Industrial Ozone Generation

    A vast selection of different ozone generator designs is commercially available on today’s market. In large-scale applications, the ground electrode is designed as gas/water tube heat exchanger, which is filled with tubular high-voltage electrodes on the gas processing side. Available constructions differ in diameter, length and arrangement of the tubular electrodes, type and support of the ...

  • Utilisation of landfill gas for the generation of energy

    The gases in landfill sites that develop during degradation processes, largely contribute to the greenhouse effect and additionally harbour considerable safety and health hazards. However, they are also often rich in methane and therefore a potential energy carrier. In many countries much of this potential for the generation of electricity and heat from landfill gas still exists. Furthermore, ...


    By Hofstetter BV

  • Keeping Water Soft -- Next Generation Filtration for the Oil & Gas Industry

    There is a need in many segments of the oil and gas production industry for an improvement in water filtration over traditional methods. This is especially true since the trend in oil and gas production is toward tighter, less permeable reservoirs and greater use of Enhanced Oil Recovery (EOR) techniques, many of which involve injecting water into oil reservoirs. In order to protect ...


    By Eco-Tec Inc.

  • Microemulsions for the oil & gas industry

    The S urf acta nt Te ch no log ie s (STL) Group has developed a revolutionary set of new* chemical materials specialising in mcroemulsions technology based on optimised surfactant design bee also SCM, November 2004, pages 32-36). This has overcome some of the drawbacks of conventional chemistries in terms of rational rrofecular design, surfactant chemistry, phase behavbur and physico-chemical ...

  • Generator gas analyzer for monitoring of hydrogen cooled turbo generators

    Hydrogen cooled generators require safety measures that reliably prevent the formation of explosive gas mixtures during normal operation as well as maintenance periods. Thermal conductivity technology based gas analyzers are used for that task. A standardized CALOMAT 6 analyzer system - Set GGA - has been especially designed for this measuring task. Regarding redundancy and explosion ...

  • Gas Utilities: Global Industry Guide

    Global Gas Utilities industry guide provides top-line qualitative and quantitative summary information including: market size (value 2010-14, and forecast to 2019). The guide also contains descriptions of the leading companies including key financial metrics and analysis of competitive pressures within the market. Features and benefits Save time carrying out entry-level ...


  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Composting generates cash for greenhouse gas benefits

    Chicago Climate Exchange (CCX) recently finalized an initiative to develop a protocol for issuing offsets to projects that avoid greenhouse gas (GHG) emissions through composting or other similar approaches. This article explores the development of the new protocol, reviews its key attributes and describes how an entity can earn tradable credits for its GHG mitigation project. In 1992, the U.S. ...


    By BioCycle Magazine

  • The State of the Art in Gas Cleaning for the Fertilizer Industry

    INTRODUCTION The fertilizer industry has earned recognition for having contributed directly to increase world grain yields in the past century. Based on the conservative estimate of the world population growth, total fertilizer use in the future is expected to grow more than 200 million tons from the current level of 165 million tons. In U.S.A. and other countries the industries ...


    By Kimre, Inc.

  • Measuring return on environment (in the oil and gas industry)

    Organizations, no matter the size or industry, have stakeholders. Those stakeholders, internal or external, have expectations for a tangible return on their investment. Measuring a Return on Environment (RoE) is about generating and executing the strategy and associated metrics to build the business case for EHS investments. Outcomes such as sustained shareholder return, increased stakeholder ...


    By MetaVu, Inc.

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Generation using gas-fuelled engines in South Africa – an overview

    Most gas engines are Otto cycle spark ignition internal combustion reciprocating engines using natural gas as the primary fuel. Smaller models utilise stochiometric combustion while the larger engines are lean burn engines with pre-chamber ignition systems. The engines are coupled with packaged generator sets, ...


    By Clarke Energy

  • LEED Canada: The Next Generation

    Looming large in the minds of most Canadians, climate change is arguably the greatest environmental challenge we face today. Given that a significant reduction in greenhouse gas (GHG) emissions is necessary to avert irreversible impacts, any solutions will require the active support of all sectors of society – government, business and citizens – to reach GHG reduction targets. GHG emissions from ...


    By Actual Media

  • Process-generated contaminants

    Overview: There is not currently a formal and universally recognised definition of a process-generated substance. Process-generated contaminants can be generated as emissions from combustion processes, abrasion and/or other processes that physically or chemically degrade or otherwise modify the starting material(s), e.g. degradation/composting of organic materials. Such ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you