industrial gas standard Articles

  • New Greenhouse Gas Standards

    The D.C. District Court recently upheld the decision allowing EPA to regulate greenhouse gas emissions. This white paper provides you background on the decision, what it means for you, and how to keep your plant compliant. Catalytic Products International will continue to stay abreast of these sweeping changes and we’ll continue to keep you informed. As EPA gears up to begin regulation of ...

  • The real benefits of standardizing on a single LIMS in the gas and petroleum industry - Case Study

    Automation of laboratory data capture and analysis is claimed to be the major challenge facing the petrochemical industry. Indeed, elimination of manual processes leads to considerable product quality improvements while also aiding compliance with strict environmental regidations. As a result, companies that wish to remain ahead of the competition are standardizing on Laboratory Information ...

  • Survey of standards related to gas detectors

    Recent events both on- and off-shore shine a bright light on the need for attention to safety and to hazard reduction, prevention, and mitigation. Errant combustible or toxic gases can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. Globally, governmental and regional authorities take gas detection and system integration very seriously and require that the ...

  • U.S. EPA`s Proposed Greenhouse Gas Standards for the Utility Industry - How Powerful Are They?

    A major event in the Climate Change arena occurred on March 27, 2012 when, for the first time, U.S. EPA proposed Standards of Performance for New Stationary Sources (NSPS) for emissions of carbon dioxide (CO2).  The proposed standards were specific to new affected fossil fuel-fired electric utility ...


    By All4 Inc.

  • Improving Safety by Conforming to Industry Standards and Certifications

    Abstract Globally, safety standards play a key role in designing and executing gas and flameame detection projects. How can these standards, which might seem cumbersome at times, help users make informed decisions? What information can be used to assist in conforming to standards and maximizing safety? This paper will analyze standards from an end-user view, will consider ...

  • Follow toxic gas standards for a smoother project

    Toxic gases, such as Hydrogen Sulfide and Sulfur Dioxide, can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. The United States Occupational Safety and Health Administration (OSHA) and other authorities take detection of these gases very seriously. The American National Standards Institute/ American Petroleum Institute (ANSI/API) and ISA industry standards ...

  • Strategic Standardization

    An Interview with John Walter, CEO of the Standards Council of Canada SCC leader John Walter discusses the strategic value of standardization, his organization’s priorities and harmonizing Canadian and U.S. standards. How is the Standards Council of Canada approaching the upcoming revision to the Canadian Standards Strategy? The Standards ...


    By ASTM International

  • Gas dispersion modelling harmonisation: an industrial viewpoint

    The harmonisation of gas dispersion modelling across Europe requires not only harmonisation of the physics incorporated into different mathematical models but also harmonisation of the way that practitioners actually use these models. This paper highlights the need to define minimum acceptable standards for gas dispersion modelling, especially in the specification of source conditions and ...


    By Inderscience Publishers

  • How the EPA’s new oil and gas standards will reduce greenhouse gas emissions

    The U.S. Environmental Protection Agency recently issued final rules to reduce air pollution at natural gas wells and other sources in the oil and gas industry. The rules—a New Source Performance Standard (NSPS) for volatile organic compounds (VOCs) and National Emissions Standards for hazardous air ...

  • Measuring return on environment (in the oil and gas industry)

    Organizations, no matter the size or industry, have stakeholders. Those stakeholders, internal or external, have expectations for a tangible return on their investment. Measuring a Return on Environment (RoE) is about generating and executing the strategy and associated metrics to build the business case for EHS investments. Outcomes such as sustained shareholder return, increased stakeholder ...


    By MetaVu, Inc.

  • What is a Mineral Thickener Tank

    The Thickener Tank is a solid-liquid separation device based on gravity sedimentation. It is usually a cylindrical shallow groove and a tapered bottom. It is made of concrete, wood or metal welded plates as a structural material. An excellent thickener brand needs to meet two basic indicators: good equipment quality and innovation. In addition ...

  • The State of the Art in Gas Cleaning for the Fertilizer Industry

    INTRODUCTION The fertilizer industry has earned recognition for having contributed directly to increase world grain yields in the past century. Based on the conservative estimate of the world population growth, total fertilizer use in the future is expected to grow more than 200 million tons from the current level of 165 million tons. In U.S.A. and other countries the industries ...


    By Kimre Inc.

  • Safety Considerations at Anaerobic Digestion Plants

    Anaerobic digestion is a collection of processes which naturally breakdown organic matter to eventually produce biogas - a methane rich gas which is burned to produce both heat and electricity. The methane can also be used as vehicle fuel or injected into the gas grid. The industry is growing fast and is forecast to continue to do so with many farmers adding bio-gas plants alongside their ...

  • Primary Standard Gas Flow Calibration—The Only Guarantee of Accuracy

    At Sierra, we have a saying: “An instrument’s accuracy is only as good as its calibration.” The accuracy of your mass flow controller (MFC) is essential in assuring the efficiency, performance, and quality of your flow meter. In many cases, if your instrumentation is not calibrated, then a decline in performance is possible due to ...


    By Sierra Instruments, Inc.

  • New Mandatory GHG Reporting for the Oil and Gas Industry

    On January 14, 2015, the Obama Administration announced an update to its March 2014 “Strategy to Reduce Methane Emissions from the Oil and Gas Sector” (Strategy).  Within this announcement it was revealed that the Administration would be taking a host of future actions in order to achieve their methane reduction goals, including the following: Proposing and setting standards for ...


    By All4 Inc.

  • How Gas Analyzers Can Benefit the Automotive Industry

    Emissions standards imposed upon auto engineering firms in the US could be set to change, as the Environmental Protection Agency reviews the current standards which have been in place since 2012. The EPA are considering redressing the greenhouse gas emissions standards for light-duty vehicles due for production in the model years 2022—2025, citing changing economic circumstances as the ...


    By Hiden Analytical Ltd.

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • The application of radiation sources in the oil and gas industry and shortages in their services

    Oil and gas industries utilise many radiation sources in various applied radiation-based technologies. Those technologies provide significant benefit to the daily operations of the industry. Gamma emitting sources of Cs-137, Co-60, Ba-133, Am-241 are used in oil and gas well logging, in Multiphase Flow Meter (MPFM) technology at oil and gas production facilities and in transmitted level gauges ...


    By Inderscience Publishers

  • Meeting the challenges of employee noise exposure in the oil and gas industry

    Noise exposure legislation, designed to protect the hearing of employees and prevent noise nuisance, is becoming tougher and more widespread. Cirrus Research plc provides a range of noise measurement instruments which have been designed to provide noise measurement solutions. In particular, the doseBadge Personal Noise Dosemeter is widely used in the Petrochemical and Mining industries where the ...


    By Cirrus Research plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you