industrial hazardous waste incinerator Articles

  • Incineration of hazardous wastes from the petroleum industry in Nigeria

    Persistent hazardous wastes are produced in the recovery, processing and upgrading of crude petroleum in Nigeria. However, recent developments in environmental pollution control are drawing increasing attention to the problems of hazardous wastes. The ever-increasing need to control these wastes from the petroleum industry often compels the chemical engineer to specify methods of treatment and ...


    By Inderscience Publishers

  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • A chance to drive hazardous waste policy

    The proliferation of energy-from-waste (EfW) power plants is making a significant contribution to the UK’s efforts to end its reliance on harmful fossil fuels. But while EfW plants provide a solution to municipal waste, they also produce a low amount of hazardous waste in the form of air pollution control residue (APCr). Despite numerous solutions existing that process and reuse APCr ...

  • Benefits of OZONATOR Technology for the Treatment and Sterilization of Medical and Bio-Hazard Waste

    OZONATOR Industries Limited white paper outlines the environmental benefits of ozone based technology for the treatment of regulated medical waste and bio-hazard waste.  OZONATOR Industries Ltd. is the world-wide manufacturer of the OZONATOR NG-3000 medical and bio-hazard waste treatment technology – with zero emissions. The OZONATOR is a revolutionary advancement in waste treatment ...


    By OZONATOR Industries Limited

  • Hazardous wastes and economic risk reduction: case study, Poland

    A concise summary balance of industrial and hazardous waste is given, reflecting the situation in Poland. Nearly 130 million tonnes of waste were generated annually in the past in more than 1300 larger industrial plants. Approximately 1800 million tonnes of industrial waste is already stockpiled. The amount of hazardous waste generated per year was 0.3 and 1.0 million tonnes of the first and ...


    By Inderscience Publishers

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • Are incineration and landfills the answer to save us from the recycling crisis?

    For plastic recycling, this year hasn’t exactly been one of the best – what is to blame? Oil. Shockingly, it actually costs more to recycle old plastic than it does to make new in many ways. Petroleum prices have fallen so low, as low as 70% below the level in June 2014. This may be great for some – however with it has fallen the cost of Virgin Plastic which is made from ...


    By GPT Waste Management Ltd

  • Guidance on Hazardous Waste Rules Issued Amid Delays to New Regime

    Technical guidance on how to interpret the new EU definition of hazardous waste has been published by the Environment Agency to help industry navigate a course through a bewildering range of semi-implemented EU law. 1 The new system, soon to replace the UK's 'special waste' regime, will significantly increase the range of wastes falling under special controls, but regulations paving the way for ...

  • Hazardous Waste Generation in Selected European Countries: Comparability of Classification Systems and Quantities

     Executive summary Background & methodology The purpose of this report is to review existing data on hazardous waste for the period 1993-1996 and to try to improve the comparability of the data. The report has been prepared by the European Topic Centre on Waste (ETC/W) as part of the work programme of the European Environment Agency (EEA). ...

  • Zero Waste - Zero Waste - Zero Waste

    The Planning Group of the Zero waste International Alliance defines zero waste as: “Zero waste is a goal that is ethical, economical, efficient and visionary, to guide people in changing their lifestyles and practices to emulate sustainable natural cycles, where all discarded materials are designed to become resources for other use.” I recently posted this question on ...


    By ABCOV Companies

  • Establishment of industrial solid waste treatment costs of the mechanical industry – a case study in Ho Chi Minh City of Vietnam

    Survey results from 72 mechanical manufacturers in Ho Chi Minh City (HCMC) in conjunction with related studies showed that industrial solid waste – hazardous waste (ISW-HW) treatment charges were operated in two forms: fixed and varied based on generated ISW-HW mass. Charges of collection – transport – storage – treatment – landfill for each waste composition varies widely (5 ÷ 20 fold), ...


    By Inderscience Publishers

  • The Trumpcard of Solid Waste management

    Solid waste management, when you heard about this word - you will be able to see a dump yard picture infront of you. And most of us are thinking that it is an an optimistic one to give solutions for solid waste management.  "Every problem is an opportunity" EcoCare Takes this slogan to bring up various solution to solve ...


    By EcoCare Technologies

  • Techniques for processing industrial waste using arcplasma generated by the twelve-phase alternating current

    We have already presented an arc-discharging plasma generator, generally called a thermal plasma generator which is constructed by the six-phase alternating current power supply(Matsuura et al, 1994a, 1997). A more effective thermal plasma generator can construct by expanding this concept. As an example, this small power supply system has been presented in reference (Matsuura et al., 1994b). In ...


    By ORBIT e.V.

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Marine Waste Management

    The Reasons of Marine Waste Management New rules from IMO (International Maritime Organization), adopted in July 2011, imply substantial changes for all ship or rig types as early as January 2013. By applying waste management, the ship or rig owner or operator takes control of waste handling with the aim of achieving some or all of the following objectives: 1) To fulfill ...


    By Harden Industries Ltd.

  • Toxins Found in E-Waste

    One of the worst effects of a skyrocketing, global e-waste crisis is the risk of toxic contamination for the environment and communities. In fact, delving into the many chemical and heavy metal materials that make up most electronic devices, it seems that toxins and electronics go hand in hand. Though many manufacturers of electronic devices are finding innovative ways to work around toxins found ...

  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • Biofilter Applications in the Coatings Industry.

    Soaring energy costs and the high cost of ‘end-of-pipe’ pollution control equipment has caused companies and regulatory agencies to re-evaluate ‘unconventional’ means of achieving VOC and HAP emissions control. The coatings industry is an excellent candidate for alternative, unconventional controls, as VOC and HAP reductions have not been as strident as has been the case in many other industries. ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you