industrial hygiene study Articles

  • Industrial hygiene case study

    Service performed: Industrial hygiene monitoring at a pharmaceutical manufacturing facility Summary: Our environmental staff performed testing and consulting to determine employee exposure levels to hazardous chemicals at a large manufacturing facility. Engineering controls and personal protective equipment were also evaluated for its effectiveness during the ...


    By EFI Global, Inc.

  • Industrial hygiene assessment of a large chemical manufacturing facility – Case Study

    Challenge: Antea®Group was contracted by a large international chemical manufacturing organization to provide a plant-wide industrial hygiene assessment of chemical and noise exposures within their facility. The overall objective of the project was to evaluate worker exposures, compare results as to compliance with applicable regulations and guidelines, and to provide ...


    By Antea Group - USA

  • Fluid waste management and disposal practices - industrial hygiene news

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care worker’s potential to become infected. ...


  • Case study - beverage industry - continuous disinfection in the bottled drinks

    Aquadron SG2 Data: Borehole water treatment Permanent disinfection by spraying HyClean Concept. Permanent disinfection by HyClean Plus Concept nebulization. Disinfectant Bottle Washer. Features: Improve the hygiene in the bottling of beverages by continuous treatment with anolyte of the critical areas, reducing preservatives, ...


    By Aquadron

  • Food technology - case study

    In all areas of the food industry mixers, dryers, reactors and entire systems are in demand and use. The industry is looking for reliable and cost effective solutions. But no matter what is the project – the requirements are extremely high. Through a process-oriented choice of variables such as vessel shape, agitator speed, wall distance, design and arrangement of mixing elements, ...


    By AVA - Huep GmbH u. Co. KG

  • medtradex - case study

    Customer: Medtradex bvba Sector: Medical sector / hygiene Country: Belgium Technology Supplier: Microtronics Engineering GmbH Year of Cooperation: 2011 Website: www.medtradex.com The Customer Medtradex is an expert in hygiene and offers both equipment and products for cleaning, disinfection and sterilization of instruments and surfaces for the medical ...

  • Cedar Rapids Flooding case study

    Services Performed Emergency remediation response, industrial hygiene, asbestos consulting and mold/indoor air quality (IAQ) testing Summary During the summer of 2008, major flooding of the Cedar River occurred which covered the downtown area in floodwaters. Many buildings including municipal and county government facilities needed to be cleaned, repaired and ...


    By EFI Global, Inc.

  • Supporting global expansion case study

    Challenge: A global specialty chemicals and materials company seeking to expand operations enlisted the support of Antea Group to provide environmental due diligence services and environmental permitting support at proposed facility locations across six countries. Specifically, the client was seeking a technology enabled process that would allow them to conduct environmental ...


    By Antea Group - USA

  • Perfectly clean water without the use of toxic chemicals - The Poultry Industry - Case Study

    Improved water quality increases earnings significantly, in the poultry industry Bacterial contamination in drinking water can be heavily attributed to biofilm buildup inside the water pipes. Danish Clean Water manufactures a line of ECA generators that produce the disinfectant NEUTHOX, which is a highly effective terminator of biofilm. Improving the quality of animals’ ...

  • Global Site Decommissioning - Case Study

    Challenge: A global oil and gas company required final decommissioning at a former terminal and blending facility that had been idle for almost a decade. The 2.5 acre site, located in South Africa, required the removal of all above and below ground structures, underground utilities, process equipment, buildings, concrete slabs and foundations. The objective of ...


    By Antea Group - USA

  • Supporting best in class performance case study

    Challenge: A precious metals refiner retained Antea Group to evaluate and improve their EHS programs with the end goal of achieving best in class EHS performance among the industry as a way to differentiate itself and create additional business opportunity.   As their current New Jersey industrial facility with deteriorating infrastructure was recognized as a significant ...


    By Antea Group - USA

  • Commercial - Area 5, Italy - Case Study

    Problem with high levels of FOG in wastewater resulting in the need for frequent pumping and emptying of the grease trap, which has been dramatically reduced using a BioAmp. Area 5 is the new washing station for commercial, industrial, construction vehicles and tourism buses. It’s modern equipment is in line with the most rigorous regulatory requirements regarding control, hygiene ...


    By NCH UK Ltd

  • Peristaltic Pumping in Dairy CIP System - Case Study

    Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines.  CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for ...

  • Efficient monitoring of glucose level case study

    MonoScan provides an efficient monitoring of glucose level in as leading jam manufacturers. The manufacturing is based on grapes to produce jams, confiture and related products for the food industry. The company sought an ultrasonic level measurement solution that will improve monitoring over the glucose level in the storage tanks and reduce costs throughout the plant. The ...

  • Case study - cryptosporidium – understanding the hidden danger

    Understanding the problem Found in water supplies all over the globe, Cryptosporidium outbreaks are now becoming more and more frequent causing severe illness that can be fatal to vulnerable groups such as the young and elderly and in a number of cases has lead to costly and drawn out legal action.  The problem is, whilst ...


    By atg UV Technology

  • Optimus and doseBadge Adapt to New Challenge - Case Study

    Established in 1934, Lindapter International is the world’s innovator of steelwork clamping systems, eliminating the requirement to drill or weld steel.  The company designs and manufactures specialist products for connecting structural steel sections together and  has more than 85 years’ experience in its field. The company’s success is the result of its dedication ...


    By Cirrus Research plc

  • Cryptosporidium – Understanding the hidden danger case study

    Understanding the problem Found in water supplies all over the globe, Cryptosporidium outbreaks are now becoming more and more frequent causing severe illness that can be fatal to vulnerable groups such as the young and elderly and in a number of cases has lead to costly and drawn out legal action. The problem is, whilst disinfection with chlorine effectively destroys other ...


    By atg UV Technology

  • Household waste recovery and recycling: a case study of Kigoma-Ujiji, Tanzania

    Management of waste in most developing countries has become important for most of the cities as they try to curb and control city growth and urbanisation. The general norm where waste management had been the sole duty of municipalities has proved not to work due to lack of funds, public participation, political will and awareness. This paper looks at the general problems faced in household waste ...


    By Inderscience Publishers

  • DHL logistics campus ground water protection case study

    When the massive logistics campus in Unna begins operations in the near future, it will change the face of the region. Approx. 350 people will be working in the massive 90,000 square meter hall helping two million pallets annually get to their proper destination. The facility requires proper safeguards especially with regards to chemical materials. The leading international logistics company DHL ...


    By NAUE GmbH & Co.KG

  • In vitro study of the effect of cationic biocides on bacterial population dynamics and susceptibility

    Cationic biocides (CBs) are widely used in domestic and public hygiene and to control biofouling and microbial contamination in industry. The increased use of biocides has led to concern regarding possible reductions in biocide effectiveness. Domestic drain microcosms were stabilized for 5 months and then exposed to polyhexamethylene biguanide ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you