industrial mixing Articles

  • ERG supplied a £2.3m waste gas treatment plant. Over 2 years on and the plant continues to deliver emissions compliance for Saffil - Case study

    Summer 2015 marked the completion of two years successful operation of an ERG (Air Pollution Control) Ltd designed, installed and commissioned waste gas treatment plant at the Saffil production facility in Widnes.  Background Saffil Ltd, a wholly owned subsidiary of Unifrax, produces high temperature insulation products, for use in automotive catalytic convertors and other ...

  • Control Algae and Improve the Water Quality in Waste Stabilization Ponds

    Due to population growth, accelerated urbanisation and economic development, the quantity of waste water generated is increasing globally. Mainly in low-income areas, a large proportion of the waste water is discharged directly in the environment. When the waste water is treated, the treatment plants may not remove certain pollutants that can have a negative impact on the people and ecosystem. ...


    By LG Sonic

  • Mixed Fertilizer Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum emissions levels that ...


    By The World Bank

  • Mixing and matching instrument components

    China Wind Power is the largest wind energy event in Asia, where some 500 exhibitors displayed their products this October – a 25% increase on 2009. The event was hosted by the major organisations in the wind energy industry in China: Global Wind Energy Council (GWEC) China Renewable Energy Industries Association (CREIA) Chinese Wind Energy Association (CWEA) ...

  • Cavitation leads to perfect mixes

    Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...


    By GlobeCore Blending

  • Turbulent Mixing in DeNOx Plants

    Industrial plant designers guarantee certain efficiency. In DeNOx plants for example the mixing process has a major influence on the efficiency. Sulzer Innotec can revert to several years experience in the simulation of turbulent mixing allowing us to quantitatively predict such applications. DeNOx plants In the last quarter century, air pollution has become a global environmental problem. ...


  • Cavitation leads to perfect mixes

    Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...


    By GlobeCore Blending

  • The Right Mix for Clean Air

    Reducing air pollution is an increasingly important topic all around the world. Many governments—also in developing countries—set new limits for emissions such as nitrogen oxides in flue gas. Sulzer offers advanced mixing technology for flue gas cleaning. The installation in a large power plant shows that these high-performance mixers can cope with the most difficult requirements. ...


    By Sulzer

  • Mixed waste composting trends

    It's been about 25 years since vendors started marketing systems to process mixed municipal solid waste via composting in the U.S. Today, there are 13 plants, most fulfilling their niche in the communities they serve - whether managing MSW in high tourism areas, or processing residual organics from materials recovery facilities. Table 1 provides summary data on the 13 facilities. While we did not ...


    By BioCycle Magazine

  • Mixed MSW composting in transition

    WITHOUT a doubt, composting the mixed municipal solid waste stream is a “niche” business. It is an MSW management option that seems to be viable in very specific situations. In some instances, these plants were built to service tourist destinations, often in somewhat rural areas where recycling is difficult and landfills are distant. In several other cases, public agencies built plants to extend ...


    By BioCycle Magazine

  • The mix map modelling approach: research application – a thought for the service industry

    Strategy and tactics need to be developed in the same direction to gain success. This is the application of the research on building the new model which will combine strategy and tactics in marketing. The model will have to satisfy three conditions. It will have to be applicable, simple and interactive. The research will consist of three parts. The first part will be the literature review aimed ...


    By Inderscience Publishers

  • Effective carbon and nutrient treatment solutions for mixed domestic-industrial wastewater in India

    The present study evaluates effectiveness of up-flow anaerobic sludge blanket (UASB) reactor followed by two post-anaerobic treatment options, namely free-surface, up-flow constructed wetland (FUP-CW) and oxygen-limited anaerobic nitrification/denitrification (OLAND) processes in treating sewage from the peri-urban areas in India receiving illegal industrial infiltrations. The UASB studies ...


    By IWA Publishing

  • Static Mixing Technology in the Textile Fibers Industry for Improved Quality and Production Flexibility

    INTRODUCTION A static mixer is a stationary in line device installed in a pipe or flow channel to accomplish mixing and related effects as a fluid flows through its structure. The concept is simple and very attractive for the continuous processing of fluids ...


  • Analysis of key aspects of the dispersion of industrial wastewaters to delimit environmental mixing zones

    In the VERTITOX research project (018/RN08/02.1), where the Principal Researcher (IP) of this application took part, a methodology for delimitation of environmental mixing zones of urban and industrial discharges was developed. That work allowed verification of the existence of critical issues in establishing the extent of these areas. Such issues lie in the statistical treatment of the ...


    By IWA Publishing

  • Spoil, rubble and a soil-tar mix

    National Grid and Wales and West Utilities recently completed their first joint remediation project at the Aberaman Gasworks following the sale of the Wales and south west of England gas network in 2005. Here Scott Lewis from National Grid and Ashley Griffiths from Wales and West Utilities explain the challenges and processes. The project was undertaken using a stabilisation and solidification ...


    By Newzeye Ltd

  • Dry mortar mixes - case study

    AVA mixers are used for the manufacture of numerous types of dry mortar. Regardless of whether you are producing cement, exterior plaster or fine plaster and in plain white or coloured, a good mixing result and 100% repeatability is a must for all applications in the dry mortar industry. As frequent product and colour changes are common in the dry mortar industry, AVA’s HTC series batch ...


    By AVA GmbH u. Co. KG

  • Cavitation reactors provide perfect mixing

    Operations of cavitation reactors are based on activation of ultrasonic cavitation in the thin layer, processed liquid pumped over through the reactor as a result is formed stable dispersion of mixed components. On an entry of reactors, liquid is supplying and it has the greatest volume in a received emulsion. Through the second entry is supplying liquid component. Both entry fittings are located ...


    By GlobeCore Blending

  • Continuously mixing one batch at a time

    Ready-mix company improves mixing efficiency and ingredient accuracy by switching to a rotary batch mixer. When a concrete and ready-mix producer moved to a new plant, the mixing process was redesigned to include batching for greater control over the final product 's ingredients. Rich-Mix Products makes concrete and ready-mix products and packages them for sale in home ...

  • Bioethanol mixing is the movable mechanism of fuel consumption

    Bioethanol mixing is applied in automotive industry; it is enough to add 10% of ethanol in gasoline considerably to increase car power and fuel efficiency. Small concentration of ethanol in fuel (to 10%) is not significantly influences on operation of the engine, but with increase of concentration to 85% be required power supply system alteration. Considering that biofuel comes to everyday life ...


    By GlobeCore Blending

  • Recycling Options for Mixed Plastics in Automotive Shredder Residues

    Waste production (ASR) from shredding of automobiles is a major global problem. The current method of disposal via landfilling is unacceptable due to environmental concerns and high cost. This project focuses on the evaluation of competing technologies for recycling automotive shredder residues and in helping solve this industrial problem by analyzing feasible solutions for implementation. The ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you