industrial noise meter Articles

  • Noise Monitors and Meters

    Sound level meters Description and ApplicationsThe sound level meter is a lightweight instrument for the measurement of sound pressure level (SPL) in decibels. All ANSI-approved meters meet minimum requirements that include an A-weighted network, a slow-response meter characteristic, and a fully graduated scale with measurements ranging from 80 to 130 dBA. The Type II meter is most frequently ...

  • Noise Measurement

    Definitions Threshold and criterion levels The threshold level is the A-weighted sound level at which a personal noise dosimeter begins to integrate noise into a measured exposure. For example, if the threshold level on a sound level meter is set at 80 decibels (dB), it will capture and integrate into the computation of dose all noise in the employee's hearing zone that equals or exceeds 80 dB. ...


  • Noise in the printing industry: Safeguarding the hearing of workers

    Why failing to monitor noise levels could open your company to lawsuits Noise at work might be synonymous with construction and manufacturing industries but it can also be a significant problem in the printing trade. Failing to monitor and control noise levels in the printing industry can result in workers suffering from ...


    By Pulsar Instruments plc

  • Controlling Exposure to Noise at Work with Personal Noise Dosimeters

    Which method is best to monitor noise: sound level meter or noise dosimeter? Controlling exposure to noise at work with noise dosimeters Our work environment has been transformed since the 1970’s with the introduction of new machinery and technical equipment designed to improve and increase general productivity. This has revolutionalised the way we operate ...


    By Pulsar Instruments plc

  • CR:243/4 noise pole – industrial power station case study

    “Before the Cirrus System was installed we could never investigate noise complaints properly because the data from the time of the complaint was not available in retrospect. We needed noise monitoring instruments that would store data continuously, with software to interrogate the monitors and download data, to give us a complete history of the noise levels at our boundaries. We have ...


    By Cirrus Environmental

  • Noise at Work Regulations: 10 Years On

    Doesn’t time fly? It’s already been 10 years since Control of Noise at Work Regulations were introduced in the UK. But have you been following the legislation correctly? Here’s an overview of what the Noise at Work Regulations mean and some common mistakes you should be avoiding. Considering that legislation to limit ...


    By Cirrus Environmental

  • Noise at Work: Frequently asked questions

    Controlling Noise at Work: Frequently asked questions Pulsar Instruments are the experts when it comes to noise at work measurement. The company was formed 45 years ago and, over the years, the team has answered numerous phone calls or met new and existing customers at Trade shows, professional meetings or in their place of work to answer their queries. Very ...


    By Pulsar Instruments plc

  • What is Long Term Noise Monitoring?

    It might sound simple, but long term noise monitoring can mean different things to different people. There is no standard definition for what long term noise monitoring is, but here is a summary that covers the basics. I first presented this presentation at the IOA Eastern Branch meeting and wanted to share my thoughts on what classes as long term noise monitoring. I’ll also discuss ...


    By Cirrus Environmental

  • What are the 4 Different Types of Noise?

    Noise comes in all shapes, sizes and sounds. It’s part of our everyday lives but before you can accurately measure it, you need to know what the different types of noise are. Here’s my advice. Whether it’s the innocent beep, a plane flying overhead or heavy machinery in your workplace, you ...


    By Cirrus Research plc

  • Ask The Noise Doctor: How Long will the Batteries Last in My Optimus Sound Level Meter?

    Do you have questions about your noise measurement instruments that Google or Wikipedia just can’t seem to answer? Ask The Noise Doctor. I’m here to answer your most frequently asked questions. Whether it’s product or application based, I’m up to the challenge. In this article I’ll be covering battery life in the Optimus Sound Level Meter range. A Commonly Asked ...


    By Cirrus Research plc

  • New Facts on Noise-Induced Hearing Loss

    Do you spend more time worrying about noise at work? You are not alone. Noise-Induced Hearing Loss (NIHL) has become a major issue for all manner of businesses throughout the UK. Personal Injury Lawyers are now promising to fight for compensation under what they call industrial deafness but what are the facts? In total, it is estimated that 18,000 people currently suffer from noise-induced ...


    By Cirrus Research plc

  • Where to use Outdoor Noise Monitoring Equipment?

    Noise monitoring equipment is required for environmental noise applications that need to be monitored over a period of time and where a hand-held sound level meter taking on the spot noise measurements would not be suitable. Noise Monitoring Equipment from Cirrus Environmental The Invictus range can ...


    By Cirrus Environmental

  • ZE: 908 Acoustic Interface – The simple way to integrate noise measurements in industrial settings

    Cirrus Environmental, a leading specialist in the design and manufacture of environmental noise monitoring solutions provide a specially designed acoustic interface, ZE: 908, which allows users to add a noise measurement capability to an existing process control system. The ZE: 908 is a small, lightweight power supply and acoustic conditioning unit for microphone preamplifiers, it is ideal as a ...


    By Cirrus Environmental

  • ZE: 908 Acoustic Interface – The simple way to integrate noise measurements in industrial settings

    Cirrus Environmental, a leading specialist in the design and manufacture of environmental noise monitoring solutions provide a specially designed acoustic interface, ZE: 908, which allows users to add a noise measurement capability to an existing process control system. The ZE: 908 is a small, lightweight power supply and acoustic conditioning unit for microphone preamplifiers, it is ideal as a ...


    By Cirrus Environmental

  • Buying Noise Measurement Equipment: how to cut costs, not quality

    At a time when budgets are under strain, the Pulsar Model 14, ultra-simple digital sound level meter offers a compliant, reliable, yet affordable noise meter. It is the preferred choice of employers looking for a meter for general purpose use whilst meeting the “Noise at Work” Regulations and the requirements of IEC 61672 to Class 2.  The ...


    By Pulsar Instruments plc

  • Demolition Noise Monitoring with John F Hunt - Case Study

    Cirrus Environmental has enjoyed a long alliance with John F Hunt Demolition going back over many years, so much so, the company’s Health, Safety & Environmental Department has accumulated almost an historic arsenal of Cirrus equipment that charts the journey of noise monitoring over the years. About John F Hunt Demolition The ...


    By Cirrus Environmental

  • Acoustiblok® Quiets Well Motor Noise for California Water District

    Acoustiblok recently resolved a noisy well motor issue that was affecting some nearby residents for Three Valleys Municipal Water District (Three Valleys MWD) in California. Ben Peralta, a Three Valleys MWD engineer working on the project said, “The new Acoustiblok All Weather Sound Panels perform better than the old ...


    By Acoustiblok International

  • CASELLA ENHANCES CEL-630 SOUND LEVEL METERS

    Addition of "Voice Recording" functionality allows user to annotate a measurement and eliminate the need for written notes. Following the launch earlier this year of its ground breaking CEL-630 series of exciting new sound level meters, Casella CEL (www.casellameasurement.com; 01234 844100), has made a number of enhancements that will ...


    By Casella

  • What to look for when buying a sound level meter

    Sound level meters: a matter of class  Since sound level meters, or slm's were invented, they have existed in various grades of accuracy.  Today, accuracy is referred to as 'Class' and the reason behind all this rests with the ...


    By Pulsar Instruments plc

  • Industrial Estates Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you