industrial odour control system Articles

  • Sustainable odour control in urban environments

    Abstract With an ever increasing focus on sustainability, the municipal recycling sector is increasingly locating recycling facilities in urban environments to be closer to their waste sources. The odour control industry needs to respond in providing ever more efficient odour extraction technologies to minimise any odour nuisance to their residential community neighbours. ...

  • High efficiency odour control for wastewater treatment

    Since the banning of sewage sludge disposal at sea in 1998 secondary treatment of sludge is now a vital part of waste water treatment. Initially many water companies opted for incineration, but over the last 10 years other options have been adopted such as producing stabilised sludge and pelletised dried sludge for use as fertiliser for agriculture. Currently over 62% of sludge is used in ...

  • High Rate Biological Odour Control Demonstration for Biosolids Exhausts

    Abstract Biorem has successfully demonstrated its high rate odour control system for biosolids exhausts at Ashbridges Bay sewage treatment plant in Toronto, Ontario. The demonstration used XLD™, a biofiltration media engineered specifically for biosolids odours. The system has achieved 95% odour removal in less than 20-s Empty Bed Residence Time (EBRT) despite high concentration of ...


    By Biorem Technologies Inc.

  • Air pollution and odour control treatment plant of contaminated air during industrial drums and package remediation process

    Customer EuroVeneta Fusti srl is an italian market leader in industrial drums and package recovery, remediation and reuse. Sited in Triveneto, in Mira next to Venice, EuroVeneta Fusti operates old drums collection, processing, regeneration and new ratification of industrial packages (such as ...


    By F.G.M. engineering srl

  • Electronic nose sniffs out odour pollution

    The science of smell is set to enhance air quality in the UK, thanks to the development of a pioneering ‘electronic nose’ for industrial odour monitoring.   Available in the UK for the first time, the technology can be used to help improve the control of odours associated with industries such as waste storage and recovery, sewage treatment, composting, chemicals and food ...

  • High efficiency odour control for sludge dryers, sludge pasteurizers and sludge stabilisation using lime and biogas treatment

    Abstract This paper summarizes ERG’s experience of supplying odour control for sludge dryers, sludge pasteurizers, sludge lime stabilization and biogas treatment and indicates areas for improvement.   Keywords Odour control, chemical scrubbing, carbon filters, waste water, OdorgardTM, sludge dryers, sludge pasteurizers, lime ...

  • Biofiltration systems for the treatment of waste gas from industrial plants

    Bord na Móna Environmental Ltd have considerable experience in the field of biological air filtration (600 installations). Initially, the majority of installations were on Municipal and Industrial Wastewater applications. This was quickly followed by Municipal Solid Waste, an application Bord na Móna jointly developed with its Italian partners Air Clean srl. Since 2000, Bord na Móna have ...


    By Anua - Bord na Móna Limited

  • Shining a Light on the Food and Beverage Industry

    As published in this months edition of Process & Control, Diane White discusses how UV systems can provide a practical, power saving alternative to pasteurisation in food and beverage production Waterborne micro-organisms are responsible for adverse effects on flavour, colour, odour and shelf life of products and, of course, potential health risks to consumers. A number of emerging ...


    By atg UV Technology

  • Current Trends in Modelling Water Distribution Systems

    Untitled Document Hydraulic Modelling is emerging from the infrastructure planning offices of our water utilities, where it continues to play a vital role in optimising capital investment projects, to take a ...


    By Innovyze

  • Environmental Health & Safety Liability Assessment Systems

    An excerpt from the book, "Information Technology Solutions for EHS Professionals," by Thomas J. Morahan, Vice President of EHS Technology at InteGreyted, International ...


  • Humid, corrosive and malodorous waste gases - Case Study

    Example: Production of bio-ethanol Similar tasks: Dryers, Fibre board industry The production of bio-ethanol - fermentation, distillation, pelleting and drying - generates odorous and humid waste gas. Upstream lamellar demisters reduce both drop formation - causing lower VOC destruction efficiency - and solid matters. The regenerative thermal oxidiser (RTO) ...

  • Treatment of leachate using the DMT MemBioRex® technology

    One of the most difficult waste waters to treat is leachate from a landfill. Leachate is water from the degrading waste and rainfall which percolates through the waste. Leachate usually contains a high concentration of ammonium, low concentrations of phosphor, high salinity, high alkalinity and various concentrations of heavy metals. Combined with strongly fluctuating flows, a high pH and ever ...

  • Committed to a cleaner future

    Increasingly strict regulations are being placed worldwide on emissions of volatile organic compounds (VOCs), typically generated in industrial processes that make use of solvents. New requirements to use Best Available Technology (BAT) will cut emission limits further in EU countries. To help companies meet this challenge, Formia has launched a family of cost-efficient VOC incinerators based on ...


  • WPL supplies Farne Salmon and Trout with a substantial new effluent treatment plant case study

    A new effluent treatment plant designed by WPL is ensuring that Farne Salmon and Trout Ltd in Berwickshire - one of Europe's largest smoked salmon facilities - complies with tighter local trade effluent discharge regulations, whilst significantly reducing its sewer discharge costs. WPL worked with Farne and Scottish Water from an early stage to design ...


    By WPL Ltd

  • WPL supplies Farne Salmon and Trout with a substantial new effluent treatment plant

    A new effluent treatment plant designed by WPL is ensuring that Farne Salmon and Trout Ltd in Berwickshire - one of Europe's largest smoked salmon facilities - complies with tighter local trade effluent discharge regulations, whilst significantly reducing its sewer discharge costs. WPL worked with Farne and Scottish Water from an early stage to design and supply a substantial, energy efficient ...


    By WPL Ltd

  • Solidification / Immobilisation of sludge from physical-chemical WWT process

    In 2003 econ received an inquiry from a service company operating an industrial waste water treatment plant. At the end of the physical-chemical WWT process this client generated metal-hydroxide sludge from his chamber filter presses. Originally he discharged the sludge into skips and brought it to a hazardous waste landfill. At this landfill, a solidification process was used to stabilise ...


    By econ industries GmbH

  • Recycling Waste Products from Molasses Fermentation: CSR Distilleries

    CSR’s Sarina ethanol distillery has changed from an environmental pariah in the local community into a welcome industry. Through a world-first plant design, it has reduced steam and water consumption, improved plant productivity and product quality, and turned a pollutant into a saleable, import-replacing product. Instead of closing down in the face of community opposition to its environmental ...


  • Biogas desulphurisation using the DMT multiple stage Sulfurex® process

    Global rising energy costs are focusing efforts by many industrial and municipal entities to find new sources of energy. Generating electricity from Biogas is of course nothing new however the cost of cleaning up certain Biogas streams with excessive levels of Hydrogen Sulphide (H2S) has previously proven to be financially unsustainable. Rising energy costs combined with improvements and cost ...

  • Machining Coolant Recycling: Unidrive

     Unidrive Pty Ltd undertake extensive machining operations during the production of automotive components. In the past this resulted in the generation of 20,000 litres of waste coolant every week. By implementing a coolant recovery and recycling system, Unidrive have saved approximately $179,000 per annum as a result of more efficient coolant usage and management. ...


  • Rotork is ‘one-stop actuation shop’ for storage tank expansion project - Case Study

    Overview Rotork has demonstrated its ability to be a one-stop shop for valve actuation products and services for an oil storage tank expansion project in Holland. Rotork's activities have encompassed the supply of intelligent electric actuators for isolating, modulating and failsafe valves, digital control systems, valve gearboxes, valve adaptation, workshop motorisation, on-site ...


    By Rotork

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you