industrial oil absorbent Articles

  • Determining flammability of SpillFix Universal Organic Absorbent

    SpillFix Universal Organic Absorbent is an industrial absorbent product made from natural coir (coconut husk). Flammability tests (as detailed below) have determined that the product is a Not Readily Combustible Solid, and is unlikely to catch fire even after absorbing flammable spills. Determining Flammability The tests for determining ...

  • Safe and efficient oil-platform removal

    Safe and efficient oil-platform removal Aker Marine Contractors (AMC) has developed a new method of removing offshore platforms to meet international decommissioning guidelines. Trelleborg Viking supplied rubber elements for the AMC buoyancy tank assemblies. Safe and efficient oil-platform removalWhat happens to an offshore oil platform when all the oil has been ...


  • Moisture in Oils: The Three-Headed Beast

    Abstract Moisture contamination in in-service lube oils is perhaps one of the most destructive forms of engine corrosion second only to particle contamination.  Water contamination in oil can be categorized into three forms of water; Free, emulsified, and dissolved.  All forms of water have direct consequences to the oil and gears of the engine, but indirect consequences as ...


    By Arizona Instrument LLC

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Rapid on-site analysis of fats, oil and grease (FOG)

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oils and Grease (FOG) or as much as 19 million gallons from 1998 to 2001 (State of North Carolina, 2004). Our increasingly mobile society has led to a decrease of cooking at home and a significant growth in the commercial food sector. This, on top of other industries such as metal processors, meat packers, cosmetic ...


    By Spectro Scientific

  • How do I get that oil out of there?

    It is a common question asked every day by people in all fields of industry. Machine shops, steel mills, industrial manufacturers, and many others are faced with the problem of removing oils from coolants and wastewater on an everyday basis. They are faced with high disposal and maintenance costs. Some manufacturers are charged extreme amounts to have their contaminated water treated properly by ...


    By Abanaki Corporation

  • How Do I Get That Oil Out of There?

    It is a common question asked every day by people in all fields of industry. Machine shops, steel mills, industrial manufacturers, and many others are faced with the problem of removing oils from coolants and wastewater on an everyday basis. They are faced with high disposal and maintenance costs. Some manufacturers are charged extreme amounts to have their contaminated water treated properly by ...


    By Abanaki Corporation

  • Food Processing: Odor Control in Edible Oil Processing

    Abstract: The problems with odor around a typical edible oil deodorizer are discussed in detail, and a three-step solution to eliminate these problems is presented. The three steps are a distillate recovery system which recovers most of the fatty acid in the deodorizer vapor discharge as a valuable byproduct, a closed loop barometric cooling water system which keeps the fatladen ...


    By CR Clean Air Group, LLC

  • Factors Affecting Oil in Water Testing Methods

    Various factors need to be considered when comparing methods to measure oil and grease in water.  Whether you are trying to meet effluent limits for an NPDES (National Pollutant Discharge Elimination System) permit, comply with oil and grease limits for the Clean Water Act (CWA), or an industry satisfying a POTW’s (Publically Owned Treatment Works) discharge permit, it is ...


    By Spectro Scientific

  • Printing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • UV disinfection for enhanced oil recovery and other oilfield applications

    One of the biggest challenges facing oil companies today is how to extract more oil from the discoveries made in the last 40 years. Estimates vary, but approximately 66% of the discovered oil gets left in the ground. The International Energy Agency has estimated that if, in the next 20 years, this figure could be reduced to 50%, then this would increase the world's recoverable oil by 1.2 trillion ...


    By atg UV Technology

  • New White Paper features Solvents for Oil and Grease in Water Measurements

    A White Paper entitled, “Solvent Choices for Infrared Testing of Oil and Grease in Water” was recently published by Wilks Enterprise, Inc.  Infrared (IR) analysis is widely used worldwide for determining the amount of oil and grease in water as it is a cost-effective measurement technique that can be easily done on-site or in a laboratory.  Since water is a strong absorber ...


    By Spectro Scientific

  • Cement Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Reducing Oil & Gas Methane Emissions: EPA Regulations & Data Collection

    U.S. President Barack Obama and Canadian Prime Minister Justin Trudeau recently committed to very specific targets in the oil and gas sector. Their ambitious goal is to reduce methane emissions by 40-45 percent below 2012 levels by 2025. This target was reaffirmed ...


    By Intelex Technologies Inc.

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • High efficiency waste tyre to oil pyrolysis plant, xinxiang huayin

    Company Profile: Waste tyre to oil  pyrolysis plant use the pyrolysis technology which is a recycling technique converting rubber or tyre waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. Huayin renewable energy equipment company has been leading China oil pyrolysis plant field since 1993. Huayin company offers a wide range of ...


  • Composting of a mixture of orange and cotton Industrial wastes and the influence of adding olivemill Wastewater

    The rapid expansion of the agro-industry during recent decades has led to the increasing production of organic wastes. Some such agroindustrial wastes are olive mill wastewater (OMW), the waste from orange juice extraction (OW) and the waste from cotton gins (CW). The OMW resulting from olive oil production contains olive pulp, mucilage, pectin, oil, the vegetable water of the fruit and the water ...


    By ORBIT e.V.

  • Adsorption of emulsified oil from spent metalworking fluid using agro-waste of Cajanus cajan

    Safe disposal of spent cutting fluids generated by the use of semi-synthetic fluids as coolant in material processing industries is a serious problem. The ultra-filtration method is mostly employed for the processing of spent cutting fluids. This method is costly and difficult to adopt by small and medium sized industries. In this study, efforts have been made to produce adsorbent using ...


    By Inderscience Publishers

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • BioLargo`s AOS Filter Wins `Technology Star Award` - New Technology Magazine -The First Word on Oil Patch Innovation

    Advanced disinfectant technology developer sets sights on oil and gas applications A small publicly-listed Santa Ana, Calif.–based company that is developing water purification and advanced disinfectant technologies, all using some form of iodine, sees one of its Edmonton-developed technologies as a way to clean up and even eliminate oilsands mining tailings ...


    By Biolargo, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you