industrial particulate removal Articles

  • Controlling particulate emissions

    Cloud chamber technology uses electrically charged water droplets to attract fine particles and remove them from exhaust streams. At the Saint-Gobain Advanced Ceramics Boron Nitride (formerly Carborundum) plant in Amherst, ...


    By Tri-Mer Corporation

  • Pollution Systems VS-3 wet srubber removes grease and particulate

    A leader in the Food Industry has several Pork Sausage Cookers at their manufacturing site in Alabama.  Each cooker exhausts over 4,000 ACFM.  The streams are saturated with moisture and the pollutant load is pork grease.  Electrostatic Precipitators (ESP’s) have been installed to treat the exhaust.  However, the ESP's were not working well and have high maintenance and ...


    By Pollution Systems

  • Removal of Particulate and Organic Matter from Municipal and Industrial Wastewaters Using Fine Mesh Rotating Belt Sieves

    The Salsnes Technology has been developed to work as a stand alone unit or an addition to primary wastewater treatment facilities. The process incorporates an continuous mesh screen that uses air as backwash therefore producing a high dry solids content waste. The technology has been widely accepted in Europe and work is being done in North and South America including installations and pilot ...

  • Particulate matter, halogen and aerosols - Case Study

    Example: Production of anodes for aluminium smelters as well as electronic industry (TFT-LCD) Similar tasks: Carbon and graphite industry, smelting of aluminium, coating of metals An anode producer has several ring furnaces to stabilise the anodes by carbonization for later processing in a melting bath. The hot exhaust gases pass through double walls in between the anodes where the gases ...

  • The Use of Particulate Emission Monitors to Support Arrestment Plant Operation and Upkeep

    The operation of filtration type arrestment plant can be optimised by the effective use of Particulate Emission Monitors (eg Filter Leak Monitors and Filter Performance Monitors). Particulate Emission Monitors are installed throughout the broad spectrum of industrial processes to satisfy regulations (IPPC, Part B Guidance Notes, WID and LCPD) for emission limit enforcement. In addition, where ...


    By PCME Ltd

  • Wet Electrostatic Precipitation Demonstrating Promise for Fine Particulate Control

    Editor’s Note: Part l of this two-part feature on wet electrostatic precipitation (wet ESPs) outlines the need for multi-pollutant air pollution control technologies, the basics of wet and dry electrostatic precipitation, the ability of wet and dry ESPs to treat fine particulate, and the use of wet ESP technology at Northern States Power Company’s Sherco Station. Part II will explore the key ...


  • Particle removal efficiency of Nano alumina fiber filters

    A 2 nanometer alumina fiber is combined with a microglass fiber to produce a nonwoven filter. Its pore size is 2 microns, yet it is functionally rated at 0.03 microns. Data are presented showing dirt holding capacity and filtration efficiency for particles from 0.001 to 7 microns. The filters have high retention for micron size silica dust, bacteria, virus, DNA/RNA, tannin and latex spheres. ...


    By Argonide Corporation

  • Industrial Maintenance for Compressor Stations

    Transporting natural gas via pipelines is very safe and cost-efficient. However, in order for the transportation process to work properly it is imperative that the natural gas be kept at the correct pressure. To accomplish this compressor stations are needed at regular intervals. Let’s take a look at some key components of compressor stations as well as industrial maintenance needs. The ...


    By STI Group, Inc.

  • Non-ferrous metals scrap yard removes metals from stormwater

    Untitled Document Calbag Metals Co., a nonferrous scrap metal recycling facility in Portland, Ore. had difficulty consistently meeting its Oregon 1200Z General Industrial Stormwater ...


  • A Layman`s Guide to Inorganic and Organic Contaminant Removal by Standard Filtration Methods

    Plant operators, maintenance engineers and mechanics, specifying engineers, installation technicians, and others involved in inorganic and organic contaminant removal are oftentimes called upon to choose and apply filtration solutions. To best make these decisions, it is helpful to review information and updated insight on basic filtration technologies, along with their advantages and ...


    By Shelco Filters

  • Industrial Media Filtration Systems, Philippines

    INTRODUCTION In July 2013, Pure Aqua successfully manufactured industrial media filtration systems to a major company in Philippines to remove particulates, chlorine, organics, and odor from well water. The industrial media filtration systems were selected from our MF-1000 Series with 48" and 42" diameter ...


    By Pure Aqua, Inc.

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Controlling Scale Deposition and Industrial Fouling

    It costs US industry billions of dollars a year to control and remove the limescale that builds up in industrial equipment such a heat exchangers, evaporative coolers, boilers, chillers and other water fed equipment. Oil wells, for example, face significant scaling problems from the highly mineralized water that are extracted with the oil. Limescale not only increases downtime, maintenance ...

  • Glass Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Cement Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Eliminating VOC From Wood Industry Processes

    ELIMINATING VOC FROM WOOD INDUSTRY PROCESSES As regulations controlling VOC and the environment become increasingly strict at local, national and international level, manufacturers in an increasing range of industries are having to consider appropriate action. The wood industry is no exception. In the manufacture of moulded wooden doors, for example, wood shavings and sawdust are bonded together ...


  • Coke Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • How an Industrial Dust Collector Fixes Sawdust Problems

    Saw dust and wood dust are potential problems in all woodworking settings. Woodworking environments will always have wood and wood dust shavings, which can lead to many health and fire dangers. What Is Wood Dust? Wood dust is categorized as a particulate airborne pollutant. A precious tool like ...


    By ProVent, LLC

  • Nickel Smelting and Refining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you