industrial pollution control Articles

  • White Paper: Cyclical Aeration Control- Combining Aerobic & Anoxic Conditions in One Basin

    Increase Water Quality with Cyclical Aeration With increased effluent pollution restrictions on municipal wastewater treatment plants, cities are pressed to find ways to economically increase their effluent quality with little to no funding. Many new NPDES permits ...

  • Bioconservacion at the CEPSA Chemical Plant

    CEPSA continues to trust in Bioconservacion solutions for the prevention of corrosion in electrical control rooms. In CEPSA's different refineries we have already installed equipment to regulate corrosion and pressurisation in electrical rooms. We recently published an article on this subject on our blog; to read the article ...


    By Bioconservacion SA

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • A Critical Evaluation of the South African Air Quality Offsets Guideline

    There is wide recognition in South Africa to the link between the quality of life and quality of the air we breathe. The Department of Environmental Affairs (DEA) attempts to improve air quality through two key regulatory tools; emission limits, which regulate the maximum concentration of certain pollutants permissible within certain, ‘listed’ industrial stacks or vents, and ambient ...


    By WKC Group

  • Principal Noise Pollution Control

    Sources of noise in industrial machinery and processes are : Rotors, Gears, Turbulent Fluid Flow, Impact Processes, Electrical Machines, Internal Combustion Engines, Pneumatic Equipment, Crushing, Blasting, Pumps and Compressors. The most desirable method of controlling a noise pollution is to minimize the noise at the source. This generally means modifying existing equipment and structures or ...

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Alternative Fuels for Air Pollution Control

    Non-traditional, alternative fuels are all the rage now, especially with government pressure forcing increasing numbers of fossil-fired assets to shut down. While wind and solar have a place in our energy future, neither is reliable or inexpensive enough to be the complete answer.  Industry is looking for new fuels that can replace coal, oil and natural gas. Proposed alternative fuels come ...

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Water pollution control and strategies in Finnish pulp and paper industries in the 20th century

    This paper discusses and analyses the evolution of the Finnish pulp and paper industries and their water pollution control strategies. The Finnish pulp and paper mills are mainly located along water courses in inland areas. The earliest documents on water pollution date back to the early 1900s. In spite of the remarkably good record during recent decades in water pollution control, it can be ...


    By Inderscience Publishers

  • Strategy for Complying with Air Pollution Control Regulations in the Chemical Industry

    Untitled Document The Clean Air Act (CAA) was originally passed by the United States Congress in 1970 and subsequently revised in 1977 for the purpose of protecting human health ...


    By Trinity Consultants

  • Electroplating Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Breweries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum emissions levels that are ...


    By The World Bank

  • Industrial Estates Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Textiles Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Printing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you