industrial process wastewater Articles

  • Industrial Wastewater

    Industrial wastewater treatment covers the mechanisms and processes used for water treatment where has been contaminated in some way by industrial or commercial activities before wastewater is released into the environment or reused. Recent trend in the developed world is to minimize the production of wet waste like water or something else and to recycle such waste during the production process. ...


    By Horizon Water Co., Ltd.

  • Online Chemical Oxygen Demand for Treatment Optimization - Case Study

    A wide variety of products are made in the chemical and pharmaceutical manufacturing industries, that require large volumes of chemicals, materials, and substances that are used throughout process operations. Waste water from these facilities typically include contaminants, toxins, nutrients, and organic content that presents challenges with regards to treatment. A major UK based chemical ...


    By MANTECH

  • Crumbling Concrete Water Networks Linked to Common Water Treatment Additive

    Concrete distribution and sewer networks are being corroded at an alarming rate partly because of a commonly used additive in the domestic drinking water and wastewater treatment process according to published reports in the journal Science. In countries throughout the world from industrialized nations like Australia and the USA to developing nations like Colombia, Ghana and the Philippines, the ...

  • Do You Need a Microfiltration or Ultrafiltration Membrane System for Your Plant?

    Determining whether or not an industrial plant needs a microfiltration (MF) and/or ultrafiltration (UF) membrane system isn’t always as straightforward as it seems. While these systems are not essential for every industrial process, when thoughtfully implemented within an intake, process, or waste stream, they can go a long way in improving a facility’s efficiency and/or cutting ...


    By SAMCO Technologies, Inc.

  • Industrial wastewater treatment

    Industrial wastewater treatment covers the mechanisms and processes used to treat waters that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re-use. Most industries produce some wet waste although recent trends in the ...


    By IWA Publishing

  • Industrial wastewater treatment

    Industrial wastewater treatment covers the mechanisms and processes used to treat waters that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re-use. Most industries produce some wet waste although recent trends in the ...


    By IWA Publishing

  • Treatment of industrial wastewater

    All industries produce some type of waste product, either from production, maintanance or both. These hazardous and non-hazardous wastes need to be properly stored, treated and discharged to a sewer system or otherwise disposed of. Wastewater treatment is a multi-stage process to renew wastewater before it is discharged to the municipal sewer system. The goal is tio reduce or remove organic ...


    By Newterra

  • On-site industrial wastewater treatment

    Priority pollutant behaviour in on-site treatment systems for industrial wastewaters The majority of wastewaters deriving from the chemical industry consist of aqueous discharges produced during the physico-chemical processing of synthetic mixtures involving operations such as filtration, centrifugation, extraction and/or distillation. The wastewater streams, referred to as ...


    By IWA Publishing

  • Industrial Sludge Wastewater Treatment

    Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve Bacteriological ...


    By Integrated Engineers Inc.

  • Industrial Wastewater Treatment Facility

    Industrial Wastewater Treatment Success Stories Industrial Wastewater Treatment Facility ...


    By Integrated Engineers Inc.

  • Processing Equipment Cleaning Wastewater Treatment

    Process Equipment Cleaning Wastewater Treatability - 7 Wastewater Samples Tested Individually & Combined Using Floccin™ Integrated Engineers provided treatability services for a company that chemically cleans process equipment. They had 7 waste streams from the process onsite. The samples ...


    By Integrated Engineers Inc.

  • Cavitational technology in wastewater treatment process

    Cavitation is one such recent technique which has been found to be substantially beneficial in wastewater treatment. Cavitation can be described as formation, growth and sub-sequent collapse of cavities releasing large magnitudes of energy locally, creating conditions similar to hot spots, and also generating strong oxidizing conditions by way of ...


    By GlobeCore GmbH

  • Different Process Configurations for Biomass-Carrier-Based Treatment of Industrial Wastewater

    IntroductionBiological treatment is still the most cost effective method to oxidize organic pollutants in wastewater. However, industrial wastewaters from different sources vary widely in composition. In some cases, the wastewater composition might prevent biological treatment by itself to meet effluent requirements. This work presents several different case studies: in laboratory, pilot and full ...

  • Performance of A-stage process treating combined municipal-industrial wastewater

    A biosorption column and a settling tank were operated for 6 months with combined municipal and industrial wastewaters (1 m3/hr) to study the effect of dissolved oxygen (DO) levels and Fe3+ dosage on removal efficiency of dissolved and suspended organics prior to biological treatment. High DO (>0.4 mg/L) were found to be detrimental for soluble chemical oxygen demand (COD) removals ...


    By IWA Publishing

  • Industrial wastewater platform: upgrading of the biological process and operative configurations for best performance

    The treatment of industrial liquid wastes is placed in a wide context of technologies and is related to the high variability of the influent physical–chemical characteristics. In this condition, the achievement of satisfactory biological unit efficiency could be complicated. An alternate process (AC) with aerobic and anoxic phases fed in a continuous way was evaluated as an operative solution to ...


    By IWA Publishing

  • Wastewater treatment in the dairy processing industry - recovering energy using anaerobic technology

    Introduction The composition of wastewater from dairy processing plants makes it highly suitable for biological wastewater treatment processing. As well anaerobic biological treatment of the wastewater there is also the option of applying anaerobic biological processes. By applying anaerobic technology a large part of the organic load in the wastewater can be removed and converted into ...


    By EnviroChemie GmbH

  • Different process configurations for biomass-carrier-based treatment of industrial wastewater

    KeywordsBiological wastewater treatment, Industrial wastewater, biomass carriers, case study IntroductionBiological treatment is still the most cost effective method to oxidize organic pollutants in wastewater. However, industrial wastewaters from different sources vary widely in composition. In some cases, the wastewater composition might prevent biological treatment by ...

  • Removal of surfactant from industrial wastewaters by coagulation flocculation process

    Surfactants are among the most widely disseminated xenobiotics that contribute significantly to the pollution profile of sewage and wastewaters of all kinds. Among the currently employed chemical unit processes in the treatment of wastewaters, coagulation-flocculation has received considerable attention for yielding high pollutant removal efficiency. Jar-test experiments are employed in order to ...

  • Standard Process Industrial Case Study

    The Standard Process company is a vitamin and food supplement manufacturer in business since 1929 located in an environmentally sensistive area called the Kettle Moraine basin. The basin is an area containing rare species with diverse habitats. The Standard Process company realizes this and has helped preserve this area with their organic farming techniques, waste reduction methods and now with ...


    By Biowater Technology

  • The importance of wastewater treatment in shipbuilding industry

    There is a huge amount of wastewater outcome during the ship production and repair processes in shipyards. Especially production processes (blasting, welding, painting, machining and metalworking), repair processes (hull washing) and painting processes (paint removal) create a huge amount of wastewater. In addition to these, open area processes of ship repair and maintenance cause stormwater ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you