industrial recycling Articles

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Aluminum recycling at Centro Rottami, Italy - Case Study

    Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials – The showcase of Centro Rottami. Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials. In fact, as much as 90% of the aluminum produced in the country comes from recycling, and is identical to ...


    By TOMRA Sorting GmbH.

  • UV LEDs making waves with clean water

    Oxford Instruments systems now facilitate water purification technology With World Earth Day last week I’ve decided to make this weeks blog about how new technology is being used to enhance people’s lives in a fundamental way. The UN recognises that clean drinking water is a global issue with over ...


    By Oxford Instruments plc

  • Keeping APCr out of Landfill

    The CIWM have recently featured an article by our very own Dr David Deegan in the latest edition of their magazine. The article explains why Tetronics International were unhappy to be informed recently that Defra ministers had taken the decision not to remove the ...

  • Packaged Polymer Injection Dewatering System - Case Studies

    Case Study Number 1 Industry: Oil & Gas, Mining and Civil Waste Management Application: Treatment of Waste Drilling Fluids for Recycling Location: Brisbane, Australia Configuration: 20’ Explosion Proof HMI Dewatering System with VFD Driven EE-1448HD Centrifuge. Objective: Wastewater Treatment Sludge Dewatering in Order to Facilitate Landfill ...


    By Elgin Separation Solutions

  • Invention of the Tire Shredder

    The process of vulcanizing rubber was discovered by Charles Goodyear (yes, you read that right) in 1839, and the development of rubber tires followed not long after (Source: Continental Truck). From there, it didn’t take long for worn-out tires to start piling up, and finding good ways to ...


    By ECO Green Equipment

  • From a 1m3 cubitainer to 50mm chips, using a two-shaft shredder? With SatrindTec, “Sí, es posible!”

    A Spanish manufacturer of HPDE cubitainers and containers based in Cataluña has chosen SatrindTech to implement its recycling line of defective cubitainers. The request received by our Sales Department was to replace an existing SatrindTech twin-shaft shredder, in use since the mid-1990s, to now be able to ensure a regular size of the shredded material. ...


    By SatrindTech Srl

  • Eco Expo Asia 2017 attracts strong participation of international pavilions to exhibit with new theme

    Eco Expo Asia is set to present its 12th edition at AsiaWorld-Expo, Hong Kong, from 26 to 29 October 2017. Organised by Messe Frankfurt (HK) Ltd and the Hong Kong Trade Development Council, and co-organised by the Environment Bureau of the Government of Hong Kong Special Administrative Region, the expo serves as a gateway to the flourishing green ...


    By Messe Frankfurt (HK) Ltd

  • Why is Energy-from-Waste slow to catch on in the U.S.?

    Nithin Coca reports in TriplePundit that Energy-from-Waste (EfW) is growing fast in Europe and parts of Asia. But it’s relatively stagnant here in the United States. In fact, the percentage of waste we burn for energy is actually slightly down in the past five years. What’s holding the U.S. back from this potentially sustainable solution? This stagnation is even more ...

  • The Recycling Industries - A Canadian Perspective

    The recycling sector is part of the environmental technology industry sector and offers economic as well as environmental and resource conservation benefits. As a major player in the global resource sector Canadian mining and metallurgical industries continue to provide opportunities for technology transfer in areas including separation and materials handling for recyclables. The paper, with some ...


    By ORTECH

  • Recycling efficiency in the construction industry

    Construction clients, policy makers and planners are increasingly setting requirements to encourage greater use of recovered materials in construction. A number of construction clients and product manufacturers have shown a desire to expand the consideration of materials efficiency to include recyclability as part of the sustainable construction agenda. Potentially there are significant benefits ...

  • Commercial Viability of the Glass Recycling Industry

    Thanks to the increasing awareness of both the environmental and financial benefits of glass recycling, it isn’t just limited to individuals and households anymore. Bars, restaurants, night clubs and even entire industries have started recycling glass products. Recycling has grown beyond just a way to save the environment, it’s now an ...

  • Recycling the Final Residues of the Paper Industry

    The pulp moulding industry converts pulps or recycled waste papers directly into fully finished products such as containers and packing materials, picnic tableware, and a wide variety of other profitably marketable products. A comprehensive and practical test program demonstrated conclusively that this versatile industry can utilize materials presently sent to landfill, incineration or ...


  • Exploring America’s hidden recycling industry

    The World Bank estimates that by 2025, some 6 million tonnes of solid waste will be generated each day around the world — nearly double what’s produced today. By 2100 that number could hit 11 million. A Smithsonian magazine article from 2013 went so far as to ask if we were on the path to “ ...


    By Ensia

  • Recycling industry frustrated by shipping lines

    Historically high oil prices, the weakness of the US dollar and an imbalance in container availability are seen as the main factors behind the sky-high freight rates demanded by container shipment companies. As a growing number of scrap exporters have come to rely on containerised rather than bulk transport, these increases are having an immediate effect on international scrap operators’ ...


    By Recycling International

  • Plastic Recycling Industry - Case Study

    Introduction Bottle Recycling has been on the uprise for a number of decades. As the global community becomes more aware of the practices and benefits of reuse and recycling of plastics, they are also demanding that better controls be put in place by the manufacturers, corporations, environmental agencies and end users. This promotes these groups to look toward new technologies that are ...


    By Clean Water Technology, Inc.

  • Growing the Composting and Organics Recycling Industry

    ORGANICS RECYCLING is a resource management system with a goal to utilize residuals to their greatest extent. For farmers, gardeners and landscapers, it means creating a compost product that economically and efficiently builds organic matter into soils and grows flourishing crops. For economic developers and ...


    By BioCycle Magazine

  • Why Briquetting Machines are Favorite of Recycling Industries?

    With the increasing attention towards proper waste recycling, there has been huge requirement of right machines and tools to properly convert waste into useful things. One of the best solutions companies and individuals got was briquetting plant for effective recycling of wood as well as metal waste. What is the major process at the recycling company: to collect waste; to segregate different ...


    By Jay Khodiyar Machine Tools

  • HSE training guidelines for the waste management and recycling industry

    This ‘good practice’ guidance was written in consultation with the Waste Industry Safety and Health Forum (WISH). It does not aim to be comprehensive but gives examples of good practice within the industry.It is for managers and those organising training within the waste management and recycling industry.This document sets out guidelines on the basic requirements for training in five key areas:- ...


  • Development of Industry Consensus Standards for Recycled-Plastic Lumber

    Just a decade ago, recycled-plastic lumber (RPL) was used mainly for park benches, picnic tables, and other non-critical load bearing applications. While produced in common dimensional lumber sizes, RPL materials have some important mechanical property differences compared to wood. The thermodynamics of processing RPL materials produce products that are non-homogeneous in their cross-section. ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you