industrial solid waste Articles

  • Water flow sensor saves school board thousands of dollars - Case Study

    SUMMARY Jessica Kukac is the Environmental & Energy Systems Coordinator with the Simcoe County District School Board (SCDSB). She oversees utility costs and monitors consumption of electricity, water, and natural gas for over 120 schools and public buildings, across 16 different municipalities. After installing the Alert Labs Flowie water flow sensor at one of the schools, she ...


    By Alert Labs Inc.

  • Geomembrana HDPE Liner for Gold Mine Tailings Pond in Indonesia - Case Study

    Geomembrana HDPE liner, also known as geomembrane HDPE liner, is the  very low permeability synthetic membrane liner used with geotechnical engineering related material so as to contain fluid or gas migration in a human-made project, structure, or system. BPM brand high quality Geomembrana HDPE liner is manufactured with ...

  • Tri-Mer catalytic ceramic filters use glass emissions filter technology with nano-bits of SCR catalyst embedded in the walls - Case study

    Filters are placed in housings and operate similarly to a “reverse pulse jet ceramic baghouse.” The filters are 10' long and 6" wide, with a wall thickness of approximately ¾ inch. Learn more information about Tri-Mer&rsquos;s hot gas filtration. ...

  • Micro Pulse LiDAR: A Critical Tool for Emissions Source Detection

    Micro Pulse LiDAR remote sensing data are used to calculate a highly accurate Planetary Boundary Layer (PBL) height to improve plume models that help assess emissions sources. ...

  • Review of the use of paper clay in the solid waste industry: physical and chemical properties

    The purpose of the paper is to give an overview of utilisation of paper clay, or paper sludge, in Northeastern USA. This paper will outline typical landfill cover practices, overview the paper-making process, discuss the waste generated by the paper industry, and discuss the beneficial uses of paper clays.Keywords: paper clay, paper sludge, landfills, permeability, construction, design, frost, ...


    By Inderscience Publishers

  • Boiler MACT Remand Request Granted

    On February 28, 2014, U.S. Environmental Protection Agency (U.S. EPA) requested a remand without vacatur of the set of rules commonly referred to as the Boiler Maximum Achievable Control Technology (MACT) rules. U.S. EPA has also requested a remand of the Commercial and Industrial Solid Waste Incineration (CISWI) rules. On May 15, 2014 ...


    By All4 Inc.

  • RCRA: Reducing Risk From Waste

    This document provides an overview of the Resource Conservation and Recovery Act (RCRA) solid and hazardous waste regulations. It describes the history of RCRA, the role of the U.S. Environmental Protection Agency and the states, and hazardous waste definitions and management requirements, including the roles of generators, transporters, and treatment, storage, and disposal facilities. In ...

  • Waste-to-energy in Indonesia

    Brief description on Waste-to-energy technologies and particular equipment that the company has designed and manufactured. CV Wirajasa Teknik Industri is offering Waste Oil Burner and Biomass Combustion to replace conventional burners that utilize fossil fuel such as natural oil, synthetic lubricating oil, Biomass Combustion Chambers can be applied in sereal and nut drying, organic fertilizers ...


    By CV Wirajasa Teknik Industri

  • Clean production in stone cutting industries

    The stone cutting industry uses high volume of water for cooling purposes and produces large volume of sludge. The disposal of both the wastewater and the sludge to a solid waste disposal site is costly and environmentally unacceptable. Wastewater and sludge from stone cutting industries in Jordan has been characterised and reused in various processes. Stone cutting industries can be modified to ...


    By Inderscience Publishers

  • A comprehensive evaluation of solid waste management in Kuwait

    One of the major problems facing a nation is the need for the proper disposal of the voluminous of solid waste generated every year. Therefore, recent literature on solid waste management in Kuwait has been reviewed and data analysed on the total amount of solid waste generated in Kuwait. In addition, industrial solid waste, construction and demolition waste, and pharmaceutical waste are ...


    By Inderscience Publishers

  • Electrical and electronic waste inventory and management strategies in Bangkok, Thailand

    This study investigates the current situation of e-waste management in Bangkok, Thailand. Information on prevailing situation was collected through interviews, surveys, questionnaires and field visits. The e-waste inventory methodology was developed for estimating e-waste generation. About 90,000 tonnes/year of e-waste was estimated to generate from households in 2003. The major contributor of ...


    By Inderscience Publishers

  • Recovery of nickel from spent catalyst by single- and multi-stage leaching process

    Nickel-supported catalyst is used in petroleum, fertiliser and iron industries. This research studied the possibility of recovering nickel by leaching the ground catalyst with sulphuric acid. The leaching was done in single stage and multi-stages. The results obtained in single-stage leaching showed that the percentage recovery of nickel increased with increasing acid concentration used up to 25% ...


    By Inderscience Publishers

  • Pneumatic powder injection technique as a tool for waste utilisation

    The problem of wastes in metallurgical and foundry industries is very important. The considerable amount of wastes is furnace dusts and other fine materials. At the Department of Foundry, the experiments with the use of pneumatic injection method were carried out to utilise these materials. The results of dusts injection into cupola, slag foaming with the use of powdered coal-furnace dusts ...


    By Inderscience Publishers

  • Case study - RDF plant Tel Aviv

    Engineering and planning, procurement, production and delivery of the complete plant engineering as well as installation and commissioning. Retention: September 2012 Throughput: 540,000 Mg/a Operational time: at least 6,200 Mg/a Input: municipal solid waste, commercial and industrial ...


    By Eggersmann Anlagenbau

  • Arizona Landfill Case Study (C3 Technology)

    Between 1979 and 1980, industrial and hazardous wastes were disposed of at the Site in a series of unlined pits, each of which was used for a particular type of waste disposal. It is reported based on evaluations of manifests that approximately 3.4 million gallons of hazardous liquid wastes and between 3,700 and 4,100 tons of solid wastes were disposed of in the pits at the Site. Of particular ...

  • Potential and possibilities of vermicomposting in sustainable solid waste management: a review

    Treatment of solid wastes using earthworms has been intensively investigated in recent years. Most of the agricultural, urban or industrial organic materials can be used for vermicomposting, ensuring that they do not contain toxic materials, which can harm the earthworms. The transformation of solid wastes into vermicompost is of double interest: a waste is converted into value-added product and ...


    By Inderscience Publishers

  • Contaminants in waste foundry sand and its leachate

    The environmental characteristics of Waste Foundry Sands (WFS), including chemicals in WFS and its leachate, are essential in understanding the environmental impact, rational disposal and potential development of beneficial applications of this solid industrial waste. This paper presents an assessment of broad-spectrum chemicals (metallic, non-metallic and organic chemicals) in aspects of their ...


    By Inderscience Publishers

  • Evaluation of rational industrial solid waste abatement in China

    Industrial Solid Waste (ISW) abatement is attracting wide attention, with its generation increasing rapidly in China. In this paper, we calculate the ISW rational abatement ratio (IRAR) of 30 regions in China from 1990 to 2005, by applying Data Envelopment Analysis (DEA). Results show that, the Eastern, Central and Western areas have the lowest, medium and highest 1990?2005 average IRAR (15.04%, ...


    By Inderscience Publishers

  • SRF plant now operational in South West France

    Commissioning of a new waste processing plant in Mende, South West France is now complete. Following almost two years of planning, design, engineering and construction, Environnement 48 began shredding Commercial and Industrial (C&I) waste to produce a Solid Recovered Fuel (SRF), this month. Already one of the region's most established waste management companies and a member of the French ...

  • Waste incineration in cement plants: constraints and development opportunities (a French-German comparison)

    Is it possible to reconcile economic and ecological concerns? This article examines, through a French-German comparison, the case of obtaining a calorific value for wastes used as substitute fuels in cement kilns. On the one hand, this new strategy for obtaining needed inputs offers to the cement industry an economic opportunity for lowering production costs (the main determinant of ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you