industrial vibration Articles

  • Vibrating Feeder

    The Vibrating Feeder can send shaped and granule materials into receiving equipment evenly, timely and continuously. The Vibrating Feeder can feed the crusher continuously and classify the material primarily in sand production line. The Vibrating Feeder is widely used in crushing and sieving production line such as metallurgy, building material, chemical industry, coal, mining and mill.   ...

  • HAV mis-measurement – to no standards whatsoever…

    Misunderstanding Hand Arm Vibration monitoring marketing material can put hands and safety policies at risk. Caveat emptor. We are regularly asked about new vibration measurement technology, particularly re the latest hand-held, glove or wrist mounted transducers that are presented as the latest assessment improvements. Whilst they may be useful tools, unfortunately some claims have been ...

  • Acoustically induced vibration: A review of industry best practice

    WKC Partner and Noise and Vibration practice leader, Richard Palmer, has recently had an article published in the Institute of Acoustics (IOA) Journal titled ‘Acoustically Induced Vibration: A Review of Industry Best Practice’. This technical paper, which provides the reader with a better understanding of the AIV phenomenon, was published in the IOA Journal in September 2015.  ...


    By WKC Group

  • Distributor for Vibration Sensors

    SPC - ELECTROTECH is an offical distributor of Monitran Vibration Sensors. These include the most advanced system of vibration monitoring velocity transducer with DC output in the following versions MTN/2285-2P, ...


    By SPC ELECTROTECH UK

  • The vibration monitoring evolution

    A recent report from Markets & Markets estimated that demand for vibration monitoring systems will reach nearly $1.5 billion by 2020. That’s a staggering increase of around 50% compared with today – with a compound annual growth rate (CAGR) of more than 6.5%. Is this growth a big surprise though? As a company that has seen first hand the rapid evolution of the ...


    By Hansford Sensors

  • Coal Vibrating Screen

    Coal Vibrating Screen, Screen For Coal Preparation We have a wide range of Vibrating screens suitable for various screening application. The  Coal Vibrating Screens are used to separate materials into various sizes for further processing in Crusher. ...


  • Opening the envelope on bearing vibration

    A sophisticated signal processing technique can help to pinpoint bearing failure at an early stage. Chris Hansford, Managing Director at Hansford Sensors, explains. Experienced operators can often tell if a machine is not working properly, on the basis that is does not ‘sound right’. The same principle can be applied – using modern electronics – to identify the exact cause ...


    By Hansford Sensors

  • Industrial Noise and Vibration: High-speed balancing - Case Study

    Dynamic balancing of rotating elements is an important aspect of the manufacture and the repair of any turbomachinery. A rotating element that is out of balance can cause major operational difficulties, which may prevent the timely start-up of a facility. Furthermore, the unbalanced element can cause internal damage that will rob a machine of its design efficiency, reduce machine reliability, and ...


    By Sulzer

  • Reduction of roof rack noise and vibration

    The noise and vibration design of automotive add-on component roof rack was investigated. Different modification options were evaluated which include mounting location alteration, mounting damping change and material revision. Results from experimental modal analysis and sound pressure spectrum measurement in a wind tunnel indicate the direction of design modification for reduction of the roof ...


    By Inderscience Publishers

  • Intensification of flotation treatment by exposure to vibration

    In this paper, an intensification of wastewater flotation treatment by exposure to vibration is studied. Exposure to vibration results in the decrease of air bubble size, increase of air flow through the aerator and more even dispersion of air bubbles in water. This intensifies the aeration process, thus significantly improving the treatment efficiency. A multistage model of flotation kinetics ...


    By IWA Publishing

  • Recent research on vehicle noise and vibration

    Vehicle noise, vibration and harshness (NVH) is usually among the top five attributes in terms of its priority in the design of automotive vehicles. Its priority in other types of vehicles (e.g., aerospace) is also important. Like other attributes of safety, performance, dynamics, fuel economy, NVH has to be considered closely in the design process. This manuscript presents a summary of recent ...


    By Inderscience Publishers

  • Vibratec`s Continuous Efforts in Reducing Noise and Vibration

    As the well-known leader in the noise and vibration field, Vibratec has been working in improving the vibration level in electric vehicles with ADETEL Group and CEDRAT to commercialize a serie of vehicle from RENAULT. Vibratec has a level of technology that is better than the other key players of German's automobile industry, however, this know-how is still new and take efforts to be known and ...

  • VIBRATION NOISE & ITS IMPACT ON HUMAN HEALTH

    Vibrational Noise is one of the major Environmental problems in Industrial Plants. The Noise Study under taken in Chinese Unit no.4 of Thermal Power Station (TPS) Jamshoro. The level and Frequency characteristics of the prevailing Noise recorded in detail, at Basement Area Feed Pumps, Turbines, Boilers, F.D.F, I.D.F & Compressors, and found that the level of Noise is higher at Boiler House and ...


  • Rectangular Vibrating Screen Separators: Uses and Applications

    Vibratory screeners come in a wide range of sizes and configurations to support a diverse set of applications. Choosing the right machine for your purposes can be a daunting task — particularly if you’re upgrading older equipment that has been used for years. Technology has changed considerably, and there’s a good chance what was best for ...


    By VibraScreener Inc.

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Vibrating Screen Separators: Maintenance and Downtime Issues

    A vibrating screen separator is a big investment for any operation and an important part of your overall process. A good screening machine will be able to reliably meet your production goals while keeping your overhead costs to a minimum. The potential for maintenance and downtime are important considerations to factor into a new ...


    By VibraScreener Inc.

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Optimisation of gearbox replacement policy using vibration measurement data

    Gearbox system reliability is a critical factor in the success of any industrial project. Poor reliability directly affects both the project's revenue stream through increased operation and maintenance (O&M) costs and reduced availability to the system due to its downtime. Indirectly, the acceptance of the system by the financial and developer communities as a viable enterprise is influenced by ...


    By Inderscience Publishers

  • Transverse vibration of multi-segment shaft system joined with multiple hinges

    A driveshaft with discontinuities (i.e., joints) is a major component in various industries including marine and automotive ones. The segments of a multi-piece driveshaft in automotive applications are joined using constant velocity or universal joints or a combination of both. The design of the driveshaft of an automotive system is primarily driven by its natural frequency. This paper presents ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you