industrial waste cleaning Articles

  • Why is Energy-from-Waste slow to catch on in the U.S.?

    Nithin Coca reports in TriplePundit that Energy-from-Waste (EfW) is growing fast in Europe and parts of Asia. But it’s relatively stagnant here in the United States. In fact, the percentage of waste we burn for energy is actually slightly down in the past five years. What’s holding the U.S. back from this potentially sustainable solution? This stagnation is even more ...

  • How Do You Choose the Best Reverse Osmosis and Nanofiltration Membrane System for an Industrial Facility?

    As global demands for clean water increase, more and more industrial facilities are looking toward membrane filtration solutions, such as reverse osmosis (RO) and nanofiltration (NF), to help manage intake, process, and waste water treatment. Using membrane filtration can help your facility reuse wastewater and virtually eliminate discharge fees, and depending on the industry or required use, it ...


    By SAMCO Technologies, Inc.

  • The Importance of Dewatering

    With spring comes two things: the onset of construction season for most of our country and rain- lots and lots of rain. The unpredictability of storms and the amount of rainfall is all a guessing game.  Jobsites flood, work stalls and projects get delayed. Rain makes it hard to keep dry and on-schedule. What’s the solution? Dewatering is a technique used to control ...


    By Pac-Van, Inc.

  • Scrubber Removes Grease and Particulates from Air Exhaust

    Operating Issue A food-industry leader in Alabama operates several pork-sausage cookers that exhaust over 4,000 ACFM of moisture and pork grease. The operator installed Electrostatic Precipitators (ESPs) to treat the exhaust but these systems performed poorly and generated high maintenance and operating costs. Additionally, these systems were antiquated and required significant capital ...


    By Pollution Systems

  • Clean energy technologies will create waste

    The birth of mitigating our dependency on oil and coal is here. We are rapidly developing energy saving and renewable-energy solutions that are about to transform our lives for the better, bringing a new era of limiting our dependency on fossil fuel, and creating less wastes when generating electricity. But inevitably through this period we will create other wastes, some hazardous. These changes ...


    By ABCOV Companies

  • Clean production in stone cutting industries

    The stone cutting industry uses high volume of water for cooling purposes and produces large volume of sludge. The disposal of both the wastewater and the sludge to a solid waste disposal site is costly and environmentally unacceptable. Wastewater and sludge from stone cutting industries in Jordan has been characterised and reused in various processes. Stone cutting industries can be modified to ...


    By Inderscience Publishers

  • Cleaning up by cleaning up

    Historically, some big businesses have made big messes. Greenhouse gas emissions, oil spills and unsafe water have become unsavoury but all-too-commonplace topics in the news and industry is beginning to sit up and take notice. Within the past couple of decades, businesses have been cropping up in Saskatchewan with the goal of cleaning up others’ messes - or simply keeping a mess from ...


    By OZONATOR Industries Limited

  • Delitek Cleans up Marine Waste Handling

    Delitek AS is one of the world’s leading manufacturers of waste handling systems specially designed for use on board ships and offshore installations. Owners and operators across the globe rely on the Norwegian company’s technology to dispose of their waste in an environmentally responsible manner and in compliance with the latest regulations The very first waste handling system ...


    By Delitek AS

  • Industrial Steam Cleaner for Tough Commercial Bathroom Cleaning

    Tough cleaning jobs call for tough machines, and an industrial steam cleaner is often the machine used for these jobs. The industrial sector deals with some of the most difficult kinds of waste and debris, even in small industrial complexes. Industrial steam machines use the power of superheated water to not only clean tough stains and sediments, but also to sanitize surfaces. Many of these ...


    By Daimer Industries Inc.

  • Industrial process & waste water -MPPE in treatment of tank cleaning-, process- and groundwater case study

    Problem: Small irregular heavy waste stream (200p ppm, EOCL, BTEX) Big fluctuating waste/ground/surface water stream (5 ppm, EOCL, BTEX) Solution: MPPE for removing non polar/toxic organic compounds Biotreatment for removing polar and Nitrogen compounds Specific details ...

  • PeCOD Case Study – Industrial Waste Water

    Clean Harbors is an industrial wastewater treatment facility in Guelph, Ontario. The facility utilizes highly refined, chemical precipitation processes, which remove heavy metals, suspended solids, and organics to generate safe effluent for discharge into municipal sewer systems. Wastewater is treated to meet municipal discharge requirements for biochemical oxygen demand (BOD5). Since BOD is a ...


    By MANTECH

  • Perfectly clean water without the use of chemicals - Waste Water - Case Study

    Wastewater treatment plant successfully cut down costs and environmental impact Thanks to the disinfectant system from Danish Clean Water, the Danish wastewater treatment plant Fredericia Spildevand is now saving yearly 75.000 € and reusing 70,000 m3 wastewater for cleaning – saving both money and drinking water. The employees at Fredericia Spildevand were quite ...

  • Case study - Waste site cleaned with one-pass trenching technology

    Waste site cleaned with one-pass trenching technology. An abandoned sand and gravel quarry, with a dubious second use as an industrial waste disposal dumping ground, has been cleaned up with the aid of a technology known as the one-pass trenching method. The site had accepted distillation wastes from a local solvent recycler. Due to odours, the dumping prompted citizen complaints that eventually ...

  • Ground Zero for Industrial Parts Cleaning Discharge - Case Study

    PROCECO helps the R.H. Sheppard Co. attain zero waste after parts cleaning. RH Sheppard purchased a PROCECO Eco-Smart MVR (Mechanical Vapor Recompression) evaporator with a goal of doubling their wastewater processing capabilities. Their new system replaces an obsolete and energy-consuming evaporator. The PROCECO Eco-Smart uses a low-energy distillation method that generates a ...


    By Proceco Ltd.

  • Bardstown, Kentucky - industrial cleaning; on-site laboratory case study

    After years of operation serving the auto parts industry, this zinc and chrome plating plant in Bardstown, Kentucky closed several years ago. It was comprised of three three main plating lines, and it was a mess. Extensive contamination, particularly chrome and acid residue, was present in the plant. In some places sludge on the floor was several inches thick. One of the major challenges ...

  • Low Flow Upholstery Cleaning Technology for Faster Cleaning

    Upholstery cleaners make the complicated task of cleaning upholstery easy, simple and quick. Chairs, sofas, draperies, fabrics in automobiles, and other such items attract dust and dirt very fast. Cleaning them manually can be extremely stressful and time consuming. Soiled upholstery can be quite an unappealing sight for people visiting your establishment or your home. Advanced upholstery ...


    By Daimer Industries Inc.

  • Zero Waste - Zero Waste - Zero Waste

    The Planning Group of the Zero waste International Alliance defines zero waste as: “Zero waste is a goal that is ethical, economical, efficient and visionary, to guide people in changing their lifestyles and practices to emulate sustainable natural cycles, where all discarded materials are designed to become resources for other use.” I recently posted this question on ...


    By ABCOV Companies

  • Waste-to-energy: Garbage to gold: putting waste conversion at the center of the clean fuel market

    As the U.S. explores new technologies to transform our energy supply and reduce our dependence on foreign oil, one of the most exciting clean energy solutions has the potential to transform the waste handling industry as well. Cellulosic ethanol, a clean burning advanced biofuel, can be derived from a wide variety of renewable, nonfood sources, including municipal solid waste (MSW) and ...


    By Waste Advantage Magazine

  • Cleaning & maintenance magazine

    An analysis of the lighting industry shows a trend away from incandescent bulbs to fluorescent bulbs. Incandescent bulbs use more energy and are more costly and less effective than fluorescent bulbs in the amount of artificial light they produce, as fluorescents produce more lumens than incandescents. Using fluorescent bulbs, however, is not entirely without risk because they contain mercury, a ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you