industrial waste heat recovery system Articles

  • Heat recovery from wastewater

    Heat recovery from gray water is particularly important in water-intensive industries such as pulp and paper plants, dairies and breweries. Rather than flushing used water down the drain, consider whether a heat exchanging system can help you put that energy to work in your process again. Most plant operators arc aware of the need to save money and reduce the environmental impact of their plant ...


    By DDI Heat Exchangers Inc.

  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • WEISS provides for the heat - and disposes of the waste case study

    The very first time PLIMOB learnt about Weiss was in 1995 at which time contacts at IKEA told about combustion plants from WEISS. IKEA is the most important customer for PLIMOB so the management listened to the recommendations. PLIMOB is producing wood furniture; large quantities of wood chips and sawdust are a spin-off effect from their production. Traditionally wood-working industries – ...


    By WEISS A/S

  • Thermal Treatment Of Halogenated Inorganic Aqueous Waste With Energy And By-Product Recovery

    This paper describes the incineration technology used to safely destroy the liquid and gaseous wastes containing inorganic salts generated by Bulk Pharmaceutical and agrochemical industries. The plants are supplied with dedicated downstream Air Pollution Control System (APC) or energy recovery where applicable. Due to the emergence of new products and increased production in Pharmaceutical and ...

  • VacuDry Indirect heated vacuum thermal Desorption by econ industries - case study

    With the VacuDry8 technology the energy-efficient treatment of hazardous and industrial waste as well as contaminated soil, oil sludge and secondary raw material is realized. Controlled vacuum and heat are used to separate minerals from oil, solvents, mercury and other hazardous substances.    At the core of the econ VacuDry8 process is a specially designed dryer chamber which ...


    By econ industries GmbH

  • Centralised treatment of oil sludge and other industrial waste

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation. econ's international client decided to be one step ahead and erected a new econ industries ...


    By econ industries GmbH

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Centralised treatment of oil sludge and other industrial waste - case study

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation, econ's international client decided to be one step ahead and erected a new econ industries ...


    By econ industries GmbH

  • Oil Skimmer system helps the Hide Tanning Industry

    OIL SKIMMER SYSTEMS HELP TANNING INDUSTRY IMPROVE QUALITY, SAVE MONEY, MEET ENVIRONMENTAL REGSThe Oil Skimmers Model 6V and 5H oil recovery systems are helping the tanning industry deal with the age-old problems of hide treatment and the new challenge of complying with strict environmental regulations.THE PROBLEMWhen hides are tanned, they are treated with a substance called chrome ...


    By Oil Skimmers, Inc.

  • Drilling oil recovery from drill cuttings case study

    By econ industries VacuDry indirect heated thermal desorption Drill cuttings are an increasing waste stream worldwide, econ industries addressed the challenge by developing a process that cleans the waste and at the same time recovers valuable drilling oil. The VacuDry plant started the successful processing of drill cuttings in autumn 2013. Our client, a medium-sized recycling company, was new ...


    By econ industries GmbH

  • Dairy Industry Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Waste Management Solutions for Business

    How to win the race for everyone Waste Management Solutions for Business Industry will always lead the way in the adaptation of new technology, and especially the technology of conservation. This is not necessarily for any ideological reason, but because the people who manage water use better understand the economic incentives for adopting new ...

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • What’s next for food waste?

    With the target to halve edible food waste by 2020 drawing ever closer, a growing number of food manufacturers and retailers are improving their waste prevention strategies. But when ‘waste’ is inevitable, what then? Paul Featherstone, group director of SugaRich, investigates the extent to which such organisations are saying ‘no’ to landfill, before considering what ...


    By SugaRich

  • Mixed waste composting trends

    It's been about 25 years since vendors started marketing systems to process mixed municipal solid waste via composting in the U.S. Today, there are 13 plants, most fulfilling their niche in the communities they serve - whether managing MSW in high tourism areas, or processing residual organics from materials recovery facilities. Table 1 provides summary data on the 13 facilities. While we did not ...


    By BioCycle Magazine

  • Zero waste cities - are they possible?

    Twenty years ago Maurice Strong, the secretary-general of the United Nations' first Earth Summit in Rio de Janeiro, declared that if our planet was to remain a hospitable and sustainable home for humans, the battle would be won or lost in major urban areas. Strong's message is even more important today, with more people now living in cities than in rural areas for the first time in history. Among ...


    By GLOBE Foundation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you