industrial water monitoring Articles

  • What classifies as water pollution and why is it an issue?

    The UN declared 2005-2015 as the International Decade for Action ‘Water for Life’. Yet each day thousands of people still die as a result of contaminated water. This does not even take into account the millions of organisms that perish every year thank to polluted water sources. Water pollution is a huge issue that is made more so by the fact that unfortunately, water is ...


    By Aquaread Limited

  • Insitu analysis of ammonia slip and water vapor using a tunable diode laser for SCR/SNCR optimization and boiler tube surveillance in power plants

    ABSTRACT Environmental Regulations driven by the 1990 Clean Air Act require Power Plants to reduce NOx emissions. SCR's and SNCR's reduce NOx emission by injecting ammonia into the combustion flue gas. which ideally reacts with the NOx to form H?0 and Nj. The efficiency of the SCR SNCR is determined by monitoring the outlet for excess NH3. referred to as NH3 slip. The flue gas sample ...

  • The P374 Intrinsically Safe Pipe Inspection System

    Are you looking for a Pipeline Inspection Camera? Suitable for a range of applications including sewer line and water pipe inspections, USA Borescopes can offer you a range of Pipeline Inspection Cameras for sale or on a rental basis.   Here is some information about the P374 Intrinsically Safe borescope by Pearpoint (Pearpoint P374). USA ...


    By USA Borescopes

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Water Industry on the Eco Wave?

    A wave of privatization is rolling through the water industry – at the environment‘s expense? In order to provide an answer to this question, the Environmental-Rating agency oekom research AG, Munich, put a number of water supply companies and manufacturers of water appliances to the environmental test. In results published today, oekom identifies the British water supplier Severn Trent as the ...


    By oekom research AG

  • Introduction to Fluorescence for Oil in Water Monitoring

    Fluorescence can be found in many applications throughout our day-to-day routines. Commercially, one of the most obvious uses is in fluorescent lighting. For this, fluorescence is used to emit light from a tube without the use of heat, unlike standard incandescent light bulbs that require a heated element. In this example, fluorescence also contributes to energy conservation efforts. At an ...


    By Arjay Engineering Ltd.

  • Monitoring Nitrates in Drinking Water and Wastewater

    Nitrate is present in high levels in wastewater due in part to the high nitrates present in human sewage but also from some types of industrial effluent entering the municipal sewer system. Nitrate is also a very common contaminant in both surface water and ground water. Nitrate occurs naturally in source water as a result of decaying plants. However, there are other manmade sources of ...


    By Real Tech Inc.

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • Groundwater Monitoring Water Solids Removal

    Industrial Waste Water Treatment Success Stories Groundwater Monitoring Colloidal Solids Removal Effective Ground Water Solids Removal The ground ...


    By Integrated Engineers Inc.

  • Hydraulic modeling and water quality monitoring

    Untitled Document The 2004 IMTech conference held in Baltimore, Maryland, April 18-20, attracted hundreds of water professionals interested in the application of IT solutions in water supply and distribution ...


    By Innovyze

  • The solutions of industrial hot water boiler water evaporation

    When the water evaporation of industrial hot water boiler occurs,we should actively looks for the reasons and the corresponding solutions to extend its thermal efficiency. In the last article,the reasons of industrial hot water boiler water vaporization have been analyzed,after consulting the engineers of Zhengzhou Boiler Co., Ltd,this text will introduce the ...

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • A Guide to Oil in Water Monitoring for Environmental Compliance

    Applications for industrial oil in water monitoring can vary greatly. In upstream and midstream oil and gas production applications, monitoring separation efficiencies is key to optimize production rates, preventative maintenance, chemical use, flow, and environmental compliance. Separated water from the oil is called produced water and it must be cleaned of oil before disposal or ...


    By Arjay Engineering Ltd.

  • Drinking water quality monitoring using trend analysis

    One of the common quality parameters for drinking water is residual aluminium. High doses of residual aluminium in drinking water or water used in the food industry have been proved to be at least a minor health risk or even to increase the risk of more serious health effects, and cause economic losses to the water treatment plant. In this study, the trend index is developed from scaled ...


    By IWA Publishing

  • Continuous Real Time Water Monitoring for Radiation Safety Terrorist Attack, Improper Disposal of Industrial Waste, Accidental Discharge

    Safe drinking water is essential to life on earth. Unfortunately, this vast infrastructure suffers from critical vulnerability. Keeping America safe with continuous real time water monitoring is a vital goal and is currently being addressed for biological and chemical risks. For monitoring of radionuclides in drinking water as recommended in the Safe Drinking Water Act 8, the Clean Water Act 9, ...


    By Technical Associates

  • Langham Industrial Controls Flow and Pressure Adaptor for Monitoring Customer Water Supply Performance

    The success of our manifold Pressure Adaptor has led to the development of our most recent product, the Manifold Flow and Pressure Adaptor. Langham Industrial Controls Ltd has recognised that there is a need within the water industry to measure both flow and pressure at the boundary box. This can now be achieved by connecting a manifold meter and dual channel data logger to the Langham ...

  • Monitoring hydrocarbons in Bilge water - Case study

    The Situation Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged ...

  • Monitoring once through cooling water - Case study

    The Situation Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil.  These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often ...

  • PeCOD Case Study – Industrial Waste Water

    Clean Harbors is an industrial wastewater treatment facility in Guelph, Ontario. The facility utilizes highly refined, chemical precipitation processes, which remove heavy metals, suspended solids, and organics to generate safe effluent for discharge into municipal sewer systems. Wastewater is treated to meet municipal discharge requirements for biochemical oxygen demand (BOD5). Since BOD is a ...


    By MANTECH

  • Surface Water Treatment Industry - Case Study

    “The surface treatment industry itself exists to produce durable products and to spare the environment.“ K. Hartwall Ltd. is an enterprise in the metal industry with net sales of approximately 20 million euro. The company is well known for its innovative carriage products used in the transport and storage of goods, especially foodstuffs. The primary material in carriages is steel, ...


    By Watman Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you