industrial water treatment Articles

  • Case study - Tin plating wastewater treatment

    The Client The Client is a steel industry based in the Middle East producing tinplates for food cans. Tinplates provide excellent corrosion resistance and are produced starting from cast iron by several steps. Cast iron is first rolled to get thickness in the range of 0.2 – 0.3 mm than it is electroplated from aqueous acid solutions at a temperature around 60°C. The plating bath ...

  • Strategic management of water resources important to Ontario craft breweries

    The vast majority of craft breweries in Ontario understand the need to improve their water and resource management performance to save money, protect the environment and enhance community relations. This was a major finding of a survey of Ontario craft breweries conducted in the fall of 2016 that found 97 per cent of respondents agree that better water management is important or very important to ...


    By BLOOM

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • The importance of Water Treatment in industry

    Water treatment is an important industry requirement and comes under 4 main branches which include boiler water treatment, cooling water treatment, water purification and the treatment of wastewater effluent. It is considered that these cover the majority of Water treatment processes in the UK and Internationally. Water treatment is often seen as an additional cost on top of an already very ...


    By Feedwater Ltd

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Low energy mixing to optimize anaerobic digestion at the Kitchener WWTP

    The existing Kitchener Wastewater Treatment Plant (WWTP) is a conventional secondary treatment facility, with a rated capacity of 122,745 mVd. The plant is comprised of two separate secondary treatment plants (Plant 1 and Plant 2) served by a common headworks facilities and primary clarifier facilities. Plant 1 was constructed in the early 1960s and Plant 2 was constructed in the mid-1970s. Both ...

  • Does your facility need Zero Liquid Discharge Technology?

    If your industrial facility discharges its waste into deep wells, streams, sewers to publicly owned treatment works (POTWs), and/or other waterways, it is likely there are some types of regulations on discharging the waste. With an increasing push toward environmental protection, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste. ...


    By SAMCO Technologies, Inc.

  • Stop It Pipe Repair System assists in decommissioning project - Case Study

    Since 1986, InduMar Products Inc. has provided a unique solution with its STOP IT Pipe Repair System. In refineries and chemical plants, where many miles of piping carry products that are often highly flammable, toxic or corrosive, the STOP IT provides a method to restore product and profit flow in minutes instead of the many hours required to cut out a pipe section, fabricate and install a new ...


    By InduMar Products, Inc.

  • Water treatment in the industrial cooling systems

    Protect your installation against corrosion, sedimentation and biological growing. AZUD filtration solutions remove a high percentage of the suspended solids in water, making easierthe maintenance labours of the installation and reducing the energy ...


    By Sistema Azud, S.A.

  • Water and wastewater treatment for Solar industry

    Solar cells arc manufactured in a complex process thai requires enormous know-how. The objective is to produce panels with a high level of efficiency at low cost. To achieve this, different production processes are used. A fundamental distinction is made between solar cells on the basis of silicon wafers and thin-film cells, in which a special process is used to apply the photovoltaic layer onto ...


    By EnviroChemie GmbH

  • Water Conservation: A Vital Consideration in Industrial Water Treatment

    Abstract Groundwater shortages, EPA regulations, aquifer pollution, and increasing restrictions on the use of chemicals in open recirculating cooling & process water systems have driven the need for alternative technologies in this sector of industrial water treatment. The VRTX Technology is a mechanical water treatment system designed to address this alternative need in cooling and ...


  • Water Treatment

    Water treatment describes those processes used to make water more acceptable for a desired end-use. These can include use as drinking water, industrial processes, medical and many other uses. The goal of all water treatment process is to remove existing ...


    By IWA Publishing

  • Industrial wastewater treatment

    Industrial wastewater treatment covers the mechanisms and processes used to treat waters that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re-use. Most industries produce some wet waste although recent trends in the ...


    By IWA Publishing

  • Surface Water Treatment Industry - Case Study

    “The surface treatment industry itself exists to produce durable products and to spare the environment.“ K. Hartwall Ltd. is an enterprise in the metal industry with net sales of approximately 20 million euro. The company is well known for its innovative carriage products used in the transport and storage of goods, especially foodstuffs. The primary material in carriages is steel, ...


    By Watman Ltd.

  • Large scale diamond electrodes for industrial water treatment

    The DiaCell® technology, based on boron-doped diamond films on Silicon substrate (BDD/Si), is a new candidate in the electrochemical water treatment market. Water disinfection and also wastewater treatment and recycling are the main targeted applications [1]. While most of the private applications such as pool water disinfection [2] require electrode surfaces in the range of 0.1 m2 per unit, the ...


  • On-site industrial wastewater treatment

    Priority pollutant behaviour in on-site treatment systems for industrial wastewaters The majority of wastewaters deriving from the chemical industry consist of aqueous discharges produced during the physico-chemical processing of synthetic mixtures involving operations such as filtration, centrifugation, extraction and/or distillation. The wastewater streams, referred to as ...


    By IWA Publishing

  • Industrial wastewater treatment

    Industrial wastewater treatment covers the mechanisms and processes used to treat waters that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re-use. Most industries produce some wet waste although recent trends in the ...


    By IWA Publishing

  • Treatment of industrial wastewater

    All industries produce some type of waste product, either from production, maintanance or both. These hazardous and non-hazardous wastes need to be properly stored, treated and discharged to a sewer system or otherwise disposed of. Wastewater treatment is a multi-stage process to renew wastewater before it is discharged to the municipal sewer system. The goal is tio reduce or remove organic ...


    By Newterra

  • Industrial Wastewater Treatment Facility

    Industrial Wastewater Treatment Success Stories Industrial Wastewater Treatment Facility ...


    By Integrated Engineers Inc.

  • Industrial membrane processes in the treatment of process waters and liquors

    A review on pulp and paper industrial membrane processes using a variety of modules and processes is presented. Membranes are mostly used today to purify process waters and to recover coating colours. Ultrafiltration using tubular membrane modules or cross-rotational (CR) filtration has been widely applied for the purification of process waters. The reuse of UF membrane permeate has decreased the ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you