inert gas generator Articles

  • Case study - Destruction of inert process emissions

    Many chemical companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the emissions produced are inert (little or no ...

  • Innovative Project for Hydrocarbons Contamination

    Baioni Crushing Plants, leader in the aggregate crushing sector has been operating for 40 years, have recently developed equipment and methods for environmental control. Several plants have already been supplied to third parties, now Baioni have full know-how of the technology and can ensure correct conception of the line based on the specifications of the soil to reclaim and can provide ...


    By Baioni Crushing Plants Spa

  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

  • Ecomex uses Oreco NitroGen to ensure an inert and safe oil tank cleaning operation case study

    Oreco NitroGen helps Ecomex in Mexico produce nitrogen on-site in combination with its tank cleaning operations – freeing it from costly third-party suppliers. As the name suggests, Ecomex is driven by environmental concerns and one of the primary services of Ecomex Mexico S.A. de C.V. is safe and environmental-friendly cleaning of large crude oil tanks and oil recovery. But manually ...


  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Pt. 3 - IN the MIX - Construction Safety and Gas Detection

    In our last blog (part 2 of 4) we consulted the OSHA Construction eTOOL to determine the factors that require a Gas Monitor. In this Blog (part 3 of 4) we explore Certified AIR ...


  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Case study - Amine tail gas treatment

    COVERING YOUR TAIL GAS The discovery of new shale formations throughout the world and the development of new drilling technologies have increased natural gas production and prompted government agencies to instigate tighter air-pollutioncontrol regulations on processing operations. Unfortunately, meeting environmental regulations is not a profit-generating endeavor. Simply put, the time ...

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Nitrogen Demand Increases for Semiconductor: How Safe Are You?

    As users demand ever-smaller smartphones and better televisions, semiconductor manufacturing plants are tasked with developing new products faster and using new materials. Key to the continued success of the semiconductor industry are inert gases, which include nitrogen and argon. When used safely, both nitrogen and argon play a number of important roles within the semiconductor ...

  • Health Hazards of Welding

    At present, it is estimated that more than one million workers are employed as welders worldwide (Sundin, 1998), with more than three million performing welding intermittently as part of their work duties (Sferlazza and Beckett, 1991). Manual metal arc welding (MMAW) and flux core arc welding (FCAW) are two commonly used procedures in the construction industry and in numerous other industrial ...


    By Valahia University

  • Municipal solid waste management in Jodhpur city, Rajasthan (India) - current status

    Jodhpur city is the second largest city of Rajasthan State, having population of about 1,077,717 and an area of 232 sq km. The city generates around 380 t/d of municipal solid waste (MSW). With the increase in population, urbanisation and industrialisation, the problems of handling MSW have significantly increased in the past few years. There is no arrangement for segregation of waste at source. ...


    By Inderscience Publishers

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • Case study - Reactor vent emission control

    OVERVIEW Many chemical and petroleum companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the ...

  • Stripper Wells goes from 1 BBL to 15 BBL for less $100/day

    Feb 2017, Jenfitch, LLC working with a private independent oil service firm from Houston, Texas recently conducted a field study on four different low producing oil wells (Stripper Wells) in Pecos County, TX. These wells were generating 1-2 barrels of oil per day. Using several different methods of injecting JC 9450 into the well, the production increased up to 15 barrels per day for 5 days and ...


    By Jenfitch, LLC

  • Pulse shear stress for anaerobic membrane bioreactor fouling control

    Increase of shear stress at membrane surfaces is a generally applied strategy to minimize membrane fouling. It has been reported that a two-phase flow, better known as slug flow, is an effective way to increase shear stress. Hence, slug flow was introduced into an anaerobic membrane bioreactor for membrane fouling control. Anaerobic suspended sludge was cultured in an anaerobic membrane ...


    By IWA Publishing

  • Long-term leachate emissions from municipal solid waste landfills sre unknown

    The Swiss have always been highly environmentally aware, and for a long while have looked after their environment in an exemplary fashion. The 'Guidelines to waste management in Switzerland' ( EKA, 1986 ) were set in 1986, well ahead of many states. One necessary objective of this as a code of good practice has been that all waste management procedures have to provide materials which either are ...


  • Time to address the air pollution control residue problem

    The incineration of municipal solid waste is gaining increasing importance in the UK, especially as the burning of waste can be used to generate energy, providing a more sustainable solution to our waste problem by diverting it from landfill sites. An issue with incineration is that some of our waste contains hazardous chemicals such as chlorine and lead which are volatilised during the process. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you