injection pump Articles

  • Upgrading Water Injection Pumps

    Water injection pumps that are used in oil exploration typically face extreme abrasion, chemical attack, and cavitation erosion in their daily operation. The injected water is frequently loaded with abrasive particles, such as quartz sand, which quickly erode conventional pump surfaces. Sulzer’s service teams offer solutions to increase the lifetime and the performance of water injection ...


    By Sulzer

  • Deepwell injection

    Project profile: BP Chemicals DATA: End User: BP Chemicals Location: Lima, Ohio Commissioned: November 2000 Units: (2) FDB-64P Hydromation, Deep Bed Filter Flow Rate: 1,300 gpm Process: Solids removal prior to deep well disposal ...


    By Filtra Systems

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Introduction to Ozone Injection Technology

    Untitled Document Ozone is a highly reactive chemical that has proven to be effective in destroying a wide variety of organic chemicals, including MtBE and chlorinated VOCs. ...

  • PET Preform Injection Molding Machine

    PET preform injection molding Machine is suitable for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. Machine Features Special injection construction designed to benefit for ...


    By Focare Mould Co.,Ltd.

  • Injecting Innovation Into The Food And Beverage Industry

    Not all water treatment needs are the same. That’s why it’s imperative to work with those that understand the subtle differences that make each industry unique. For food and beverage companies, that means aligning with a company focused on oxygen transfer with a track record of innovation in jet aeration and mixing. Water Online spoke with KLa Systems to discuss its success within the ...


    By KLa Systems, Inc.

  • Steam injection heating of biosolids & sludge for Anaerobic Digestion

    The article focuses on the integration of Direct Steam Injection (DSI) heating as a method for heating of Municapal, Industrial, Food, & Agricultural wastewater streams. Common applications are anerobic digestion, biogas production, waste de-activation, and FOG (Fats-Oils-Grease) heating. Topics covered include how DSI works, how to select a DSI heater suitable for viscous & difficult to ...


    By ProSonix

  • JP-4/JP-8 Bioremediation Using ORC® Pumped into Permanent Injection Wells (PDF)

    At Nellis Air Force Base, Nevada, a site investigation revealed that two separate floating product plumes and a larger dissolved plume consisting of JP-4 and JP-8 jet fuel existed. Floating product thicknesses ranged from less than one-half inch to almost three feet. The length of the dissolved plume extended about 700 ...


    By REGENESIS

  • Direct-Push Injection and Circulation Biobarrier to Remediate a TCE Groundwater Plume

    ABSTRACT: The goal of this study was to determine if direct-push drilling methods combined with a circulation system could be used to establish a passive biobarrier in a very transmissive aquifer to treat tricholoroethene (TCE). The Site is located in central Indiana, where historic use of TCE has impacted an unconfined aquifer. A plume consisting primarily of TCE has migrated from west to east ...


    By EOS Remediation, LLC

  • Komax teflon lined mixer simplifies acid injection for power plant

    A major source of waste water in many power plants is the waste stream that results from ion exchange used for demineralizing the boiler feed water. The alkaline regeneration waste stream produced by the ion exchange process requires the addition of an acid to this stream before discharge from the plant. Regulatory authorities typically require the effluent to have a near neutral pH before ...


    By Komax Systems, Inc.

  • Vinyl Chloride Attenuation By Direct Injection of Time-Release Magnesium Peroxide.

    ABSTRACT: This case study shows that there is potential to remediate dissolved vinyl chloride by oxygenation in the field. Residual vinyl chloride concentrations have been remediated in the field at a mid-western site with a phosphate-intercalated peroxygen (ORC®, a proprietary formulation of magnesium peroxide that releases oxygen slowly). The site was formerly operated as an aluminum coating ...


    By REGENESIS

  • thin wall high speed precision injection molding machine

    For thin wall plastic parts molding, high speed precision molding machine is the key point. At the same time,thin wall molding has high requirement for the high speed injection molding, like high injectin speed,high responsibility, high clamping force,and high effiency and precision plasticization system. Thin wall plastic ...


    By Focare Mould Co.,Ltd.

  • Performance and exhaust emissions of a two-stroke spark-ignition engine with a direct-injection system

    A direct fuel-injection system has been adapted to a small two-stroke spark-ignition engine to prevent the charge from flowing through the cylinder during the scavenging process. The injection system consists of a jerk-type pump and a single-hole nozzle which supplies gasoline to the cylinder. Engine tests were carried out for comparison with the carburettor version of the same engine. The ...


    By Inderscience Publishers

  • Pump it up

    Aligning itself with a major equipment supplier and dealer helps the company access the tools and expertise it needs without risking too much capital. Aquatech is the distributor for Godwin Pumps of America in Ontario, Nunavut, Newfoundland and Eastern Labrador, all resource-rich territories. A recent purchase of Godwin by ITT Corporation has expanded the lineup of mine sector pumps. The company ...


    By Aquatech Dewatering Company

  • Case study - Descaling already deposited calcium scale from injection moulds and preventing new formation leads to increased efficiency increased production and reduced downtime

    MGH S.A of Pergamino Buenos Aires ARGENTINA… tells in their own words how Fluid Dynamics Colloid-A-Tron Technology improved the efficiency of their injection moulding circuit MGH S.A. is an Argentinean company dedicated to the production and commercialisation of plastic cable ties MGH were founded as importers-exporters in 1880 and since 1994 have been working under licence from ...

  • Pumps for the Booming FPSO Sector

    In the last few years, several new offshore oil fields have been discovered. The current findings from Petrobras and other companies in the pre-salt province, located in the Brazilian continental shelf, suggest reserves of over 50 billion barrels of oil. Extracting the pre-salt oil is challenging and done increasingly with floating production storage and offloading units (FPSOs). Sulzer offers a ...


    By Sulzer

  • Picking the Perfect Pump

    By John Amundsen, District Manager The Gorman–Rupp Company Pumps and pumping systems are like unsung heroes of modern society – quickly and quietly transporting vital water supplies, chemicals and waste to and from locations, which rely upon their consistent, reliable operation. In fact, pumps and pumping systems are one of those entities that aren't ...


    By Gorman-Rupp Co.

  • Schwarze Pumpe Germany case study

    MPPE Technology for Schwarze Pumpe (Germany) Groundwater remediation former brown coal conversion site 2 years intensive testing 5 MPPE units are installed (2004) > 99% removal of BTEX (>200 mg/l) & PAHs (>5mg/l) Reinfiltration of purified water Ideal to enhance in situ biodegradation Enhanced ...

  • Verderflex Peristaltic Industrial Pumps excel in diverse applications

    Verderflex Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to use, easy to control, versatile and reliable way to pump liquids. Verderflex Industrial pumps can be used in a broad range of applications: Anaerobic Digestion Sludge Transfer Verderflex pumps were specified due ...

  • Hand-pump subsurface arsenic removal: the effect of groundwater conditions and intermittent operation

    Hand-pump subsurface arsenic removal (SAR) has been investigated in rural Bangladesh with different groundwater conditions and intermittent operation modes. Multiple injection-abstraction cycles were performed after injection of 1 m3 of aerated water. From these experiments it can be concluded that hand-pump SAR, in the traditional injection-abstraction design, does not provide drinking water ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you