injection water filtration Articles

  • Moredun Group incinerator vital part of research centre - Case Study

    Moredun Group benefits the welfare of farm animals through research. An incinerator was needed to destroy the clinical waste produced on site, to prevent a bio-security hazard. Client overview Moredun Group is a worldwide renowned animal health and welfare centre, that specialises in the research into infectious diseases of farmed livestock. In 1995, the ...

  • Biostyr, Chapel-en-le-Firth WwTW

    United Utilities 5.1 MLD The Client United Utilities are the 2nd largest water company in England / Wales. They are responsible for an area in the north west of the UK, which includes major cities such as Manchester and Liverpool. The Client's Needs Chapel-en-le-Frith is situated in the Derbyshire peak ...


  • Chemical cleaning is cost-effective, efficient

    Chemical cleaning is an important offering within Clean Harbors’ portfolio of industrial cleaning/maintenance services for refineries, petrochemical processors and other process manufacturers. Along with high-pressure cleaning, pigging, Tech Sonic sound wave cleaning and other technologies, chemical leaning is a safe, efficient and cost-effective way to remove corrosion, deposits, residual ...


    By Clean Harbors

  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • Liqui-Cel® membrane contactors can help meet pure steam requirements in pharmaceutical industry

    Pure SteamPure steam is used in sterilization chambers as a common method to sterilize pharmaceutical products, such as equipment parts, instruments, containers and materials for sterile environments. Although regional Pharmacopeias in Europe, Canada, Japan, India and China have minor differences in limits and measurement techniques, they each have similar specifications on pure steam ...

  • Project profile - USEPA arsenic demonstration project Springfield, Ohio – Chateau estates arsenic and iron treatment system

    Background AdEdge Technologies Inc. (AdEdge) was selected in 2004 by the U.S. EPA and the host site as part of the Round 2 Arsenic Demonstration Program to implement full scale arsenic treatment for the Chateau Estates Mobil Home Community in Springfield, Ohio. The public water system has approximately 230 connections with an average daily flow of 45,000 gallons per day. AdEdge was ...

  • Acid Mine Drain (AMD) treatment to achieve very low residual heavy metal concentrations

    Abstract Mount Emmons mine wastewater treatment plant currently treats on average around 450,000 gallons per day of acid mine drain (AMD) water collected into several collection ponds. The plant uses standard lime hydroxide precipitation process at pH 10.7 to precipitate heavy metals and remove AMD contaminants with the subsequent flocculation - dissolved air flotation (DAF) and sand ...

  • Why The Best Floor Steam Cleaner Machines Are Super-Powerful?

    Floor cleaning is one of the most tiresome and time-consuming tasks in commercial and industrial settings. In addition to being vast in area, the floors here experience heavy traffic and consequently accumulate lots of dirt, grease, grime, and mud. Scrubbing or mopping floors is no longer effective in maintaining sparklingly clean look at all times. For this reason, smart cleaning professionals ...


    By Daimer Industries Inc.

  • Project profile - City of Moulton, Texas arsenic, iron, manganese treatment system

    Background AdEdge Technologies Inc. (AdEdge) was selected by the City of Moulton and Hejl, Lee, and Associates (HLA) to design a full-scale arsenic treatment project using its AD26 and Granular Ferric Oxide (GFO) adsorption technology. In addition to designing the system, AdEdge assisted HLA in obtaining a construction permit from the Texas Commission on Environmental Quality (TCEQ) for ...

  • Re-agent dosing - Sodimate installs standardised equipment to meet the specifications of each plant case study

    Water quality refining is the most essential step in water treatment processes. When done properly, it guarantees palatable taste characteristics suitable for drinking water. The reliability and accuracy of the processes for storing, metering, and dissolving the required re-agents are indispensible for successfully completing this final treatment. Outlined below is a case story about Viry- ...


    By Sodimate, Inc

  • Activated Sludge Treatment Plant - Eatonton, Georgia - Case Study

    Solids management at municipal wastewater treatment plants is crucial in maintaining operating efficiencies and permitted discharge levels. Drying beds and mechanical methods of dewatering bio-solids can be labor intensive and inefficient for rapid solids removal. Miratech Geotube" Dewatering Technology offers munic-ipalities a cost effective solution for rapid solids removal and long term solids ...

  • Wastewater Treatment Plant - Newport, New Hampshire - Case Study

    THE CHALLENGE Newport, New Hampshire is a small New England community of 6000 residents. The treatment plant treats primarily residential sewerage, although Newport is home to an internationally known firearms company, which also sends its waste to the municipal plant for treatment. This 1.3 MGD plant which operates at an average of .75 MGD, was built in 1971 and upgraded in 1988 to ...

  • Side By Side By Side: The Evaluation of Three High Rate Process Technologies for Wet Weather Treatment

    ABSTRACTMost large combined sewer communities face significant financial investment to address wet weather compliance issues. Innovative, cost-effective methods of dealing with wet weather flows is a must to prevent spiraling rate increases for rate payers. High rate clarification and high rate filtration systems are becoming the technology of choice for treating wet weather flows. The City of ...

  • Effective Temperature Control for Cement Kiln Off-Gases

    INTRODUCTIONEffective off-gas temperature control without unwanted side effects can be achieved in many cement plants with state-of-the-art evaporative spray technology. Gas temperatures have elevated in recent years from as low as 180°C to over 370°C. This is coincident with a higher proportion of 'dry' operation kilns. Evaporative cooling water sprays in conditioning towers, ducts or at the ...


  • Fuel Polishing & Transfer Systems

    Earlier this year, Algae-X International came out with a totally new line of Fuel Polishing & Transfer Systems designed and built there in Fort Myers, Florida facilities. By listening to its customers, boat builders and yacht owners alike, Algae-X found out what they wanted to have as an on board fuel optimization package. The design is modular, so the right system can be chosen for each ...


    By AXI International

  • Aeration ditch upgrade exceeds expectations - Case Study

    Triton Process Aerators Meets Future Nitrogen Permit Regulations When the a Pennsylvania Sewer Authority was researching methods to improve the dissolved oxygen levels in its wastewater treatment plant’s oxidation ditches in 2001, they decided to totally replace its aging brush rotor system. They replaced the rotors with the  ...

  • What you need to know about diesel exhaust fluid (DEF)

    Sweeper engines have gone through some big changes in the last ten years. And each change has brought additional costs, unfamiliar technology, and new maintenance requirements. One of those changes is the development of Tier 4 Final engines that require diesel exhaust fluid (DEF). ...


    By Schwarze Industries, Inc.

  • Comparison of centrifuge and belt press for compressible digested sludge after thermal hydrolysis

    ABSTRACT Historically it has been shown on many projects that centrifuges can outperform belt presses in dewatering digested sludge. However results from a number of projects where sludge has been treated before digestion with Cambi thermal hydrolysis process (THP) have shown good results for belt press dewatering – generally greater than 30% DS. The authors propose that the main mechanism in ...


    By Cambi Group AS

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Overview of seawater desalination status and challenges

    Introduction World oceans contain over 97.2% of the planet’s water resources. Because of the high salinity of ocean water and the significant costs associated with seawater desalination most of the global water supply has traditionally come from fresh water sources – groundwater aquifers, rivers and lakes. Today, however, changing climate patterns combined with population ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you