instrument manufacturer Articles
-
Our past and our future
Measuring stack emissions has a long history. Our science, technology, needs, assumptions, and politics has dictated the directions we have gone. I will lay out the milestones of our past and look at why we went in our various directions. Then I will attempt to look into the future. The future can and probably will branch in several directions as it has in the past depending upon our future ...
-
HFlow 1 Metal Powder Flowability Tester
HFlow-1 tests the flowability of metal powder by measuring whether the sample can flow through the 2.5mm standard funnel. The design and production of HFlow-1 Hall flow meter is based on the Chinese national standard GB / T1482-2010 and international standards ISO4490-2008. Powder Flowability Measurement: Powder flowability Testing sample: metal powder Technology: Hall flow meter As the leading ...
-
Powder Characterization
The macroscopic, physical properties of a powder pile are the basic characteristics of powder materials. Knowledge of these properties is therefore a crucial factor in powder production, processing and packaging, as well as in the transport, storage and application of these materials. Alongside the large number of measuring instruments for powder characterization such as particle size, particle ...
-
2022 Updated Engine Emission Detection Technology and Equipment Technology and Market Analysis by Cubic
Environmental pollution has always been the focus of attention. In order to alleviate the air pollution caused by motor vehicle emissions, countries around the world have been scrambling to develop new energy vehicles in recent years. Although new energy vehicles have been developed, the application of gasoline and diesel fueled internal combustion engines is still dominant at this stage. How to ...
-
Nanoptic 90
Nano-particle Size Analyzer Nanoptic 90 is a nanoparticle analyzer based on the well-known technique of dynamic light scattering (DLS). Nanoptic 90 can measure nano materials with size down to 1nm. The high-power long lifetime laser and high sensitivity PMT provide Nanoptic 90 the ability to demonstrate rapid and accurate testing results. Measurement: Particle size Particle size range: 1 to ...
-
Using Mass Spectrometry to Research Thermal Hydrolysis of Waste
Mass spectrometry is used to research the thermal hydrolysis of waste materials to gain a deeper understanding of how changing parameters affect the outcomes of the process. Mass spectrometry, especially an instrument manufactured to analyse dissolved species, is ideal for waste materials as contaminants can be identified and measured. This blog post will look at the importance of thermal ...
-
See How Cubic Effectively Controls Car Pollution Through Innovation in Engine Emission Detection Technology
Environmental pollution has always been the focus of attention. In order to alleviate the air pollution caused by motor vehicle emissions, countries around the world have been scrambling to develop new energy vehicles in recent years. Although new energy vehicles have been developed, the application of gasoline and diesel fueled internal combustion engines is still dominant at this stage.How to ...
-
FV ABRASIVE FILM-2019
Application: FV is one special flexible film made by RIKEN RMC. Taking advantage of special maker line, RIKEN RMC has designed this new item. FV is a flexible product used in the field of ultra-fine sanding, with a stearated coating to effectively prevent clogged and anti-static, suitable for automobile repair, musical instrument manufacturing industry primer and topcoat sanding, polishing. ...
-
Continuous quality improvements in a high-technology manufacturing environment
This article discusses the implementation of Total Quality Management (TQM) in a company, which manufactures high-technology instruments. It illustrates the experiences common to many organisations that have tried several different approaches to TQM, often without much success. In several frank interviews, employees at various levels of the organisation discussed their experiences and perceptions ...
-
Protoc TOC succes at Manchester Airport
The case study outlines the installation of Protoc TOC analysers at Manchester International Airport used for continuous surface water quality monitoring and control. The Protoc TOC instrument manufactured in the UK by Pollution & Process Monitoring Ltd was rigorously tested and was selected for a number of installations at critical drainage locations which have proved the reliability of the ...
-
Pulsar welcomes new Marketeer
Laura Jenkins – Pulsar Instruments Marketeer Pulsar Instruments, UK – Introducing Laura Jenkins, Pulsar Instruments’ new Marketeer for Noise Meters and other sound level solutions. Laura joins Pulsar with over 14 years cross-sector marketing experience gained in many industries including engineering and scientific instrument manufacturer. Laura maintains a professional ...
-
iNet control supports safety accountability at all levels - Case Study
iNet Control provides safety managers with operations-specific detail through easy-to-read summary reports that identify when, where, and for which users alarms occurred. A leading North American chemical manufacturer and long-time Industrial Scientific customer needed to get broader visibility into its safety operations. Over the years, gas detectors at over 20 company sites were replaced on ...
-
Drinking Water Analysis Guide
Public Water Systems (PWS), regulated by the United States Environmental Protection Agency (USEPA), provide drinking water to 90% of Americans. Water systems and laboratories testing drinking water for Safe Drinking Water Act (SDWA) compliance must be certified and must use USEPA approved methods, which are developed by the USEPA, other government agencies, universities, consensus method ...
-
Compete or collaborate
The history of science is full of stories of both longstanding rivalry and successful collaboration between researchers or research groups. At best, a competitive attitude can boost the performance of scientists and speed up making discoveries and publishing results. However, nobody benefits, when the competition is going too far and people start to hide their best results and stop sharing their ...
By Airmodus Oy
-
Laser Diffraction
Particle size measurement using static light scattering The particle size distribution as a parameter to specify a powder or dispersion plays a central role in many applications. Examples are construction material (sands, cements), pharmaceutical development, lime stones, ceramics, colored pigments, fertilizers, emulsions and may more. The range of applications is increasing permanently and hence ...
-
Optimized Photoluminescence Quantum Yield in Upconversion Composites considering the Scattering, Inner Filter Effects, Thickness, Self Absorption, and Temperature
Introduction Optimising upconversion (UC) composites is challenging as numerous effects influence their unique emission mechanism. Low scattering mediums increase the number of dopants excited, however, high scattering mediums increase the UC efficiency due to its non-linear power dependency. Scattering also leads to greater thermal effects and emission saturation at lower excitation power ...
-
Proper Cleaning of Gas Detector Instrument
This guidance provides recommendations on the cleaning and disinfection of Gas Detector equipment. We recommend you use personal protective equipment (PPE) when operating and cleaning your instrument to help reduce risk of infection and contact with viruses.Approved cleaning methods are as follows:Instrument should be powered off when cleaning. Dampen a soft or disposable cloth and clean all ...
-
New affordable infrared thermometer PCE-660
PCE Instruments, manufacturer and supplier of test, weighing, laboratory and control equipment with HQ in Germany and several branches around the world, e. g. in the UK and the US, offers lots of high-end instruments for industrial use but also quite a wide range of low-cost test instruments, especially infrared thermometers for private and professional use which are very popular. PCE’s ...
-
Understanding Oil-in-Water Instrument Specifications
The measurement capabilities of oil-in-water analysis methods are described by several analytical figures-of-merit. Examples are: Range (Linear and Dynamic) Limit of Detection (LOD) Limit of Quantification (LOQ) Precision (Repeatability and Reproducibility) Sensitivity Accuracy Response Time Some or all of these are often specified by customers in the bid packages issued when selecting a ...
-
Portable Colorimeter Precision Color Meter tester L a b Delta E L C h XYZ RGB USB
Shenzhen xinzhibang Inst. & Eqpt. Co., Ltd company is devoted to produce various precision color meter and precision color tester. And we welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better Shenzhen xinzhibang Inst. & Eqpt. Co., Ltd. is set up in 2011. We are a professional manufacturer, specialize in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you