integrated gas detection system Articles

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

  • Enhanced Laser Diode Spectroscopy Design for High Integrity Gas Detection Applications

    Operators of gas detection systems used in safety-critical applications in the hydrocarbon processing, petrochemical and other industries are increasingly looking for rugged fixed, open path (line-of-site) gas detectors featuring high safety integrity with low levels of maintenance and total cost of ownership. Enhanced Laser Diode Spectroscopy™ (ELDS™) is a unique class of laser diode ...


    By Senscient Inc

  • Oil & Gas Leakage Detection Contractors

    RADS (Remote Aerial Detection Systems) teamed with market leading vendors to supply state-of-the-art Intelligence Surveillance and Reconnaissance (ISR) and security equipment. RADS is a US-based top-tier Technology Integrator that serves international commercial and government customers across the world. Unlike the large US defense contractors, RADS is independent and can operate with agility ...


  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • Distributed Thermal-Acoustic Data Integration

    Silixa has developed a technique called Distributed Thermal Acoustics (DTA) to monitor simultaneously the thermal and acoustic profile along a hybrid optical fibre cable in submarine environments. Using its world leading distributed fibre optic technology (ULTIMATM DTS and iDASTM) Silixa deployed an optical fibre cable along the seabed and across the water column in an active gas seepage ...


    By Silixa Ltd

  • Landfill Gas Clean-up and Upgrading to Hydrogen System

    Quadrogen has extensive knowledge of and experience in biogas and landfill gas clean-up systems technology, design and development. Quadrogen’s Integrated Biogas Clean-up System will remove all sulfur species, siloxanes, chlorides, water, oxygen and other impurities from biogas to the parts per billion level required for reliable and long term operation. Quadrogen also has extensive ...


    By Pioneer Air Systems

  • Fire and Gas Protection Systems as Part of Safety Instrumented Systems and Risk Management

    Garth Watkins, Director Europe, Middle East, Africa, Detector Electronics Corporation, Presented at HazardEx International Conference 2008 Process-systems operators today face increasing demands for lower costs and higher safety standards in an increasingly regulated environment. In addition, companies desire to provide a working environment that is as safe as possible. As a result, plant owners ...

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • Survey of standards related to gas detectors

    Recent events both on- and off-shore shine a bright light on the need for attention to safety and to hazard reduction, prevention, and mitigation. Errant combustible or toxic gases can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. Globally, governmental and regional authorities take gas detection and system integration very seriously and require that the ...

  • Establishment of the encoded photometric (ep-ir) spectrometer’s ability to detect the lowest possible level of moisture

    Problem Statement The race for a system that can detect the lowest possible level of moisture is seemingly everlasting. As the race continues we have begun to explore the options of using an EP-IR spectrometer coupled with DID Photonics Integrated IR Source 4 Runner. Experimental Equipment The EP-IR spectrometer is vibration insensitive and runs ...


    By CIC Photonics, Inc.

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Field Detection of Chlorinated Alkenes in Well Water using the FROG-4000 Portable GC - Case Study

    Introduction Defiant’s FROG 4000, a portable GCPID system, was used to identify and determine the concentration of chlorinated alkenes in several extraction wells located in Tacoma Washington. Split samples were taken at each well and sent to an offsite lab for analysis. This case study examines the field exercise and highlights the high degree of agreement between the offsite lab and ...


    By Northern ANI Solutions Ltd.

  • Making Every Drop Count: Unitywater uses leak detection as a foundation for condition assessment

    It stands to reason why many utilities respond to leaks only after they receive a call about water gushing from a street or a complaint from a customer about a damp basement, or other signs of visible leakage. Human nature reflects the adage that is often easier to respond to an ...


    By Pure Technologies

  • Benefits of HART Communication-Enabled Gas and Flame Detectors

    Catastrophic results can occur when a fire or a flammable/toxic gas release goes undetected in any petrochemical facility. For early warning and prompt hazard mitigation, flame detectors and gas detectors are essential tools. Clear, usable, diagnostic information from these detection instruments is extremely valuable in ensuring the devices are properly maintained, tested, and poised to protect ...

  • IR Gas Detector Provides Rapid Response

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and ...


    By General Monitors

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Identifying Leaks from Natural Gas Pipelines at a Safe Distance

    The use of natural gas, of which methane is the principle component, is increasing worldwide. According to the American Petroleum Institute methane meets 24% of U.S. energy demand and heats over 50% of all U.S. households. It also has many industrial uses, such as the manufacture of chemicals like ammonia, methanol, butane, ethane, propane and acetic acid; it is also an ingredient in products as ...

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you