integrity monitoring Articles

  • Monitoring the oxygen content in bio-methane-to-grid supply

    Orbital utilise the EC91 ATEX oxygen analyser from Systech Illinois to accurately monitor the oxygen content in the purified bio-methane gas prior to it being injected into the national grid gas network In September 2010, Orbital installed the gas monitoring and treatment plant on the UK’s very first large-scale bio-methane-to-grid production facility. This site was designed specifically to ...


    By Systech Instruments Ltd

  • E-Z Trays an Integral Part of Levelland`s Groundwater Treatment - Case Study

    QED E-Z Tray® Air Strippers an Integral Part of Levelland's Groundwater Treatment System The refinery at the former Motor Fuels Corporation produced all grades of gasoline, tractor fuels, diesel, distillate products, and fuel oils. It closed in 1954 after 15 years of operation, and the refinery equipment was removed by 1958. The property has since been redeveloped, but the ...


    By QED Environmental Systems

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • To integrate, or not to integrate...

    While environment, health, safety (EHS) and quality management issues are often handled by individual management systems, the guiding principles behind each of these areas share a common link — W. Edwards Deming. The American quality guru is most commonly associated with the Plan-Do-Check-Act (PDCA) cycle, an iterative problem-solving process used to resolve quality issues and improve ...


    By Intelex Technologies Inc.

  • How to Choose the Right Energy Management Software [GUIDE]

    Happy New Year! Wait, what’s wrong? Not so happy? In trouble trying to choose the right energy management software for your project? Oh no! We can just picture the scene: your desk is piled high with brochures, quotes and provider offers… and the clock is ticking. Yours is the classic energy manager dilemma: the longer ...


    By DEXMA

  • Flow Rate Measurement in Full Pipes Using the Transit Time Method

    Particularly in large diameters the relevance of water volume measurement is growing. The challenge with cooling water or fresh water processes is to generate accurate flow recordings or to document and to control individual consumptions and withdrawal quantities. Flow detection, however, particularly in large diameters is highly demanding. In such cases the transit time measurement thanks to its ...


    By NIVUS GmbH

  • Technical and safety practices

    Safety is absolutely paramount in the medical industry, with lives literally at stake if something were o go wrong. Regrettably, this was more than reinforced recently following the tragic news of a death of a newborn at a hospital in Sydney, Australia, after it was mistakenly administered nitrous oxide (N2O) instead of oxygen (O2) in July this ...


    By Geotech

  • How a contract research lab advanced its polymer characterization capabilities

    Realizing the Advantages of Ultra-High-Performance Size Exclusion Chromatography Compared to GPC Intertek is a global provider of quality and safety services designed to help businesses improve products, assets and processes, overcome market constraints and reduce risks. From auditing and inspection, to testing, training, and certification, Intertek enables customers to meet end ...


    By Waters Corporation

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

  • Integrate noise measurements into your existing Process Monitoring and Control Systems.

    The ZE:908 is a small and lightweight power supply and acoustic conditioning unit for the Cirrus MV:200 microphone preamplifiers and MK:170 Outdoor microphone units. Many industrial plants have a variety of process sensors strategically placed around their site so that safety, environmental impact and efficiency can be monitored and managed, in real time, from one or more control rooms. The ...


    By Cirrus Environmental

  • Calibration of a passive, in situ, integrative sampler for monitoring of microbial biotoxins in aquatic environments

    In this work, an integrative passive sampler based on a silicone membrane filled with a suspension of γ-Fe2O3 at pH 3.5 was developed. The novel device was calibrated for the measurement of microcystin concentrations in water. Laboratory calibration studies of the passive sampling devises under controlled conditions of temperature, water turbulence, and analyte concentration were ...


    By IWA Publishing

  • SeNsiM-SEC: secure sensor networks integration to monitor rail freight transport

    In recent years, the interest in monitoring infrastructures has spread in many application domains, even because of the number of natural disasters and terrorist attacks. This important activity can be seen in the general context of critical infrastructure protection, such as the freight trains meant for hazardous materials transportation. The design of these systems must answer to several ...


    By Inderscience Publishers

  • Pfizer Ireland selects eSight for automatic Monitoring and Targeting and integration of energy data

    Pfizer is the world’s leading research-based biomedical and pharmaceutical company. Operating in over 150 countries and over 25 languages, Pfizer is a globally recognised brand. With a stated mission of applying innovative science to improve health, Pfizer is responsible for some of the world’s well-known and life saving medicines and spends $8.1 billion a year on research – ...


    By eSight Energy

  • Demonstrating Compliance through Integration of Continuous Monitoring Data with Environmental Management Information

    An essential ingredient for Emissions Management Information Systems (EMIS) to effectively manage compliance information is facility monitoring data, especially at a petroleum refinery where so much process data is already monitored to ensure optimum operating performance and safety conditions. EMIS solutions typically reside on corporate or facility servers that are readily available to ...

  • Integrated risk and recovery monitoring of ecosystem restorations on contaminated sites

    Ecological restorations of contaminated sites balance the human and ecological risks of residual contamination with the benefits of ecological recovery and the return of lost ecological function and ecosystem services. Risk and recovery are interrelated dynamic conditions, changing as remediation and restoration activities progress through implementation into long‐term management and ecosystem ...


    By John Wiley & Sons, Ltd.

  • Integrated Wastewater Management

    ' Appropriate wastewater management, within an overall water resources management program, is essential to responsible use of the environment and to affordable provision of services. Such management programs are best developed at a river basin or sub-catchment level. An approach is outlined for developing a wastewater strategy and an implementation plan for a river basin.' Integrated ...


  • Completely Integrated Environmental Management

    Environmental information management isn't what it used to be. It's no longer about software programs that manage data and write reports, but whole programs that do everything. As a wider array of companies offer environmental information management systems (EMIS), and as in-house and desktop software solutions have become more common, EMIS options become wide indeed. EH&S managers are ...


    By Chemical Safety Software

  • Distributed Thermal-Acoustic Data Integration

    Silixa has developed a technique called Distributed Thermal Acoustics (DTA) to monitor simultaneously the thermal and acoustic profile along a hybrid optical fibre cable in submarine environments. Using its world leading distributed fibre optic technology (ULTIMATM DTS and iDASTM) Silixa deployed an optical fibre cable along the seabed and across the water column in an active gas seepage ...


    By Silixa Ltd

  • Integrated local water supply plan

    Client: City of Wichita, Kan. Completion Date: June 2001  Services Provided Water supply planning Evaluation of alternatives Cost estimating Economic comparison Environmental studies (NEPA) Program management Hydrogeologic engineering Water quality monitoring ...


    By Burns & McDonnell

  • Learn How to Implement a More Effective Emissions Monitoring Strategy with Our Application Note, “The Art of Emissions Monitoring and Sampling: Maintaining Gas Integrity”

    Over the past 15 years, all of us here at E Instruments have used our expertise to design, manufacture, and distribute quality emissions monitoring equipment, air quality monitors, and many other products to clients all over the world. Aside from creating many high-quality and reliable instrumentation solutions, something else we've always ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you