internally-fed drum screen Articles

  • Rotary Drum Screen - Case Study

    This case study showcases how the Old Atlanta Club Wastewater Treatment Facility has solved its debris problem thanks to Aqualitec's rotary drum screen Drumtec which is ian internally fed rotating drum screen built for heavy pretreatment applications such as draining, mud thickening, and sandy or ...


    By Aqualitec Corp.

  • Drum mixer compounds wide range of particles... and a modified paddle mixer solves a tricky problem

    In 1985 Mortex Manufacturing Co., Inc., bought a new rotary drum mixer in anticipation of expanding its line of chemical additives that are used to make decorative, nonskid coatings for concrete around swimming pools and on patios. The additives are mixed with white cement and white ...

  • Start up of Indonesian Cinnamon Plant employs screen classifying cutter, rotary mixer

    Starting up a new process plant can be a tricky business for any company, but when it is the first plant the company has ever built and the location is halfway around the world from equipment suppliers, the project can be daunting. So it was with ForesTrade, Inc., when it set about building Indonesia's first state-of-the-art organic cinnamon-processing plant and an associated essential oils plant ...

  • Streamlining Wastewater Treatment in Poultry Processing: Michigan Turkey and Lyco Team Up to Provide a Showpiece for Reducing BOD and TSS Levels

    With the steady increase in poultry processing rates there has been a corresponding increase in wastewater pollutant concentrations. Despite mechanical improvements in wastewater treatment, many poultry processors continue to pay unnecessarily high fees for municipal water discharges. $100-million-annual processor, Michigan Turkey Producers, in conjunction with Lyco Manufacturing, has set up a ...


    By Lyco Manufacturing, Inc.

  • BT-Wolfgang binder erected new glass powder plant for Geocell for the production of foam glass ballast in upper Austria

    The planning, delivery and installation of the complete machine and electro engineering equipment for the glass powder plant from the company GEOCELL, one of the leading producers of foam glass ballast in Europe, was carried out by the company BT-Wolfgang Binder GmbH from Gleisdorf, as general contractor. Initial situation: Before construction of the plant, the glass powder was ...

  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • Mixed MSW composting is steady as she goes

    Two new facilities came on line in 2006, while one ceased operation and a second is shifting to a new technology. Annual survey identifies a total of 14 plants. Part I STEADY-STATE may be the best phrase to describe the status of facilities composting mixed municipal solid waste in the United States. In fact, steady-state may be the best phrase to describe solid waste composting in general since ...


    By BioCycle Magazine

  • Rapid, gentle blending maximizes strength of powder metal parts

    Nestled in the heart of the powder metal capital of the world, Allegheny Blending Technologies (ABT) specializes in custom blending of ferrous and non-ferrous powder metals that are sold to molders of powder metal parts. These blends of iron powder and additives (copper, nickel, graphite, manganese sulfide and dry lubricants) play important roles in products and equipment. In the U.S. automotive ...

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Pro-X Nutraceuticals, a Roex company, triples mixing capacity, reduces labor and waste

    A former athlete and body builder named Rod Burreson searched for non-pharmaceutical supplements to enhance his physical condition, but none met his quality requirements, prompting him to develop and personally test his own formulations. Based on the health benefits he experienced, Burreson started a company in 1994 called Roex, Inc., that used contract manufacturers and packagers to ...

  • Lightweight concrete mix profitable using heavyweight batch mixer

    To increase production of concrete mixes containing coal fired power generation plant ash products, Charah Inc. opened a new manufacturing plant in Emporia, VA, which also serves as a warehouse and distribution center for other concrete industry products. Profit margins are slim in this high volume business, so management placed great emphasis on the capital and operational costs of the equipment ...

  • Building Sustainable Sanitation Systems

    A low cost system of resource management such as composting toilets is helping to mitigate many of Haiti’s social and ecological challenges. The Caribbean Republic of Haiti — the poorest, most environmentally degraded country in the Western Hemisphere with a population of about 10 million — is a case study in forestry and soil fertility mismanagement. A colonial ...


    By BioCycle Magazine

  • Nitrogenous Fertilizer Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • MSW Composting in the United States

    Massachusetts became home to two new composting facilities that process MSW and biosolids. Nationally, the total number of operating plants is 19. Since the mid-1980s, BioCycle has been conducting an annual, nationwide survey of municipal solid waste (MSW) composting facilities. From the late 1980s into the early 1990s, when it was projected that landfill capacity would drop and tipping fees ...


    By BioCycle Magazine

  • Renewable energy marketplace

    ALLU Group markets two types of equipment for use in biomass energy operations. The ALLU Screener Crusher bucket attaches to a front-end loader. The bucket is designed to aerate, crush, screen and mix at one time. The Screener Crusher has a rigid steel frame, onto which horizontally rotating screening and crushing drums are mounted. All the drums rotate in the same direction. There are several ...


    By BioCycle Magazine

  • Controlling scale deposits in the pulp & paper industry

    The pulp and paper industry is one of the heaviest users of water within the North American industrial economy, requiring on average 54 cubic meters of water per metric ton of finished product.  As water is used in nearly every part of the manufacturing process, accumulation of scale is a phenomenon that can occur in all pulp and paper making processes. This occurs even with the purest water ...

  • `Hyperwaste Reduction` :Organics Recycling May Get Digested Look In Iowa

    CEDAR RAPIDS — with active support from the Iowa Department of Natural Resources (DNR) — is optimistic about its new strategy to expand organics recycling. Under the leadership of executive director Dave Hogan, the Bluestem Solid Waste Agency, which serves the Cedar Rapids region, is presently composting 118,000 tons/year of yard trimmings and paper/pharmaceutical sludges. But Hogan is convinced ...


    By BioCycle Magazine

  • Bringing powdered metal blending in-house, rotary-style

    When processing powdered metal compounds for products such as gyro rotors, flywheels, counterbalances, boring bars and grinding quills, the proportion of powdered metal ingredients must be precise, and the distribution of those ingredients 100 percent uniform. Mi-Tech Metals, Indianapolis, IN, has been manufacturing products from high-density tungsten-based alloys for more than 26 years, during ...

  • Rotary batch mixer yields high-quality blends for powder metallurgy

    GKN Sinter Metals Inc. is the world's largest manufacturer of parts made by powder metallurgy, a molding process that produces complex shapes with a range of properties. Powder metallurgy offers benefits in part fabrication over competing metal processes. It is faster than forging or casting and permits the use of more performance-enhancing alloys than die-casting. GKN Sinter Metals, Auburn ...

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you