ir gas Articles

  • DOAS Explained

    DOAS stands for Differential Optical Absorption Spectroscopy. The DOAS technique was conceived almost a century ago, and it was applied on research level to air quality monitoring already in the 1970s. In the mid-1980s, the technology was then commercialised and turned into practical and wide-spread use. The acronym DOAS itself reveals quite a lot of what it is about. ...


    By Opsis AB

  • IR Gas Detector Provides Rapid Response

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and ...


    By General Monitors

  • Moisture detection for semi gases via EP-IR Spectroscopy

    Introduction EP-IR is a new technology that provides opportunities for uncharted territories One of these territories is moisture analysis What limit of detection for moisture can be achieved? EP-IRGAS Encoded Photometric-Integrated Real-Time Gas Analysis Solution Incorporates an Aspectrics 128 channel ...


    By CIC Photonics, Inc.

  • An Application of Tomographic Reconstruction of Atmoshperic CO2 Over a Volcanic Site Based on Open Path IR Laser Measurements

    Abstract—The southern area of Italy is characterized by the presence of many active volcanic areas. In Pozzuoli (Naples, Italy), an urban area characterized by high volcanic risk, a gas emitting site is present. An high percentage of CO2 is emitted, whose atmospheric concentration measurement is an important task in many environmental and scientific applications. In this paper, we describe the ...


    By Boreal Laser Inc.

  • Rapid Field-Screening of Waste Oil/Solvent Drums with Horizontal ATR / Fast-Screening IR Spectroscopy

    While the growth of technology and industry has given us a high standard of living, it has also given us a greater amount of waste products to deal with. A significant portion of the waste is either buried underground or stored in abandoned warehouses. Some of this waste material may be harmless and innocuous, and some may be quite hazardous; but all of it must be tested by some procedure to ...


    By Buck Scientific Inc

  • Establishment of the encoded photometric (ep-ir) spectrometer’s ability to detect the lowest possible level of moisture

    Problem Statement The race for a system that can detect the lowest possible level of moisture is seemingly everlasting. As the race continues we have begun to explore the options of using an EP-IR spectrometer coupled with DID Photonics Integrated IR Source 4 Runner. Experimental Equipment The EP-IR spectrometer is vibration insensitive and runs ...


    By CIC Photonics, Inc.

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Oil & Gas Leakage Detection Contractors

    RADS (Remote Aerial Detection Systems) teamed with market leading vendors to supply state-of-the-art Intelligence Surveillance and Reconnaissance (ISR) and security equipment. RADS is a US-based top-tier Technology Integrator that serves international commercial and government customers across the world. Unlike the large US defense contractors, RADS is independent and can operate with agility ...


  • The design and installation of the gas collection system

    The designer of gas collection plants has the task to fulfill optimally the important criteria: stability of gas quality efficiency of collection economic viability of the plant The stabilisation of the gas quality helps to solve the problem between the uneven gas production of the landfill on the one side and ...


    By Hofstetter BV

  • Understanding the Benefits of Fixed Gas Detection

    "Fixed gas detection is an essential method of ensuring maximum protection for personnel and plant. There are a variety of technologies available for a multitude of applications. Understanding fixed gas detection is the first step in providing safety." What is fixed gas detection? Fixed gas detection is installed with the aim of providing continuous, area and personnel protection. ...


    By a1-cbiss

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • Detecting Hydrogen Gas and Fires: Seeing the Unseen

    Hydrogen usage is growing. The general public sees and reads about hydrogen as an alternative fuel for cars. However, the big use for hydrogen is found in hydrocarbon processing and other important manufacturing processes. Hydrogen is the first element on the periodic table and is an essential element in the manufacturing of many of our everyday products. We must have respect for its explosive ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Fixed Versus Portable Gas Detection – Which Is Better?

    Did you know that workers are needlessly injured every year as a result of leaking toxic or combustible substances? Such incidents are known to involve a wide range of hazardous gases (including ammonia, carbon monoxide, chlorine, hydrogen sulfide, hydrocarbon vapors and so on). The sad reality is that most of these accidents are avoidable if only the workplace is adequately monitored. This leads ...

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Proactive Leak Detection of Oil & Gas Assets Can Improve Worker Safety

    According to the U.S. Energy Information Administration, there have only been 4 new refineries built in the last 20 years on US soil. Those 4 refineries have a combined capacity of These complex, engineering amusement parks must be properly maintained if they want to continue to not only be operable but also profitable. One aspect of proper maintenance and environmental stewardship is ...


    By EnTech Engineering, Inc

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • The application of radiation sources in the oil and gas industry and shortages in their services

    Oil and gas industries utilise many radiation sources in various applied radiation-based technologies. Those technologies provide significant benefit to the daily operations of the industry. Gamma emitting sources of Cs-137, Co-60, Ba-133, Am-241 are used in oil and gas well logging, in Multiphase Flow Meter (MPFM) technology at oil and gas production facilities and in transmitted level gauges ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you