iron removal filter Articles

  • Removal of iron and manganese from aqueous solutions using carbon nanotube filters

    Carbon nanotubes (CNTs) have become the focus of attention of many scientists and companies worldwide. CNT-based filters have a prospective advantage in comparison to the commercial filters already in operation because they are light weight and do not require electricity to operate. This investigation handles the filtration efficiency of manganese and iron from aqueous solution using ...


    By IWA Publishing

  • One process removes arsenic & iron from water in small Utah town

    The Safe Drinking Water Act brought with it tough arsenic compliance standards, forcing cities large and small to comply with a maximum contaminant level of 10 parts per billion (ppb) or face stiff fines and even the potential shutdown of wells. Smaller towns such as Cannonville, Utah, face the most difficult challenge, due to manpower and budget constraints. Cannonville turned to Filtronics, ...


    By Filtronics, Incorporated

  • Interactions between ammonia, iron and manganese removal using pilot-scale biofilters

    Pilot-scale biofilters treated with real groundwater were established to systemically investigate the interactions between ammonia, iron and manganese removal. When both of ammonia and manganese in influent were about 1 mg/L, they were quickly removed; but when manganese was above 3 mg/L, ammonia removal was affected significantly. When total iron was above 5 mg/L, the oxidization rate of ...


    By IWA Publishing

  • Project profile - Foxxtown Apartments Sudlersville, Maryland arsenic, iron & manganese removal

    Background AdEdge Technologies Inc. (AdEdge) was selected in 2006 by McCrone Engineers and the awarded contractor, Maryland Construction to design, build, and install a full scale AD26GS+ arsenic, iron, and manganese treatment system for their customer Foxxtown Apartments in Sudlersville, Maryland to meet the new EPA arsenic standard. The treatment system was based on the design ...

  • Iron and manganese removal from groundwater by filtration through a chalcedonite bed

    The aim of this research was to determine the effectiveness of iron and manganese removal from groundwater using chalcedonite sand as a filter bed in rapid filtration. The experiment was conducted at a pilot plant. At the first stage of research, chalcedonite and silica sand were compared. The ripening time for manganese removal of chalcedonite was 27 days while silica sand was ripened within 57 ...


    By IWA Publishing

  • Iron-based sorption materials for the removal of antimony from water

    The objective of this work was to verify the sorption properties of granular filter materials (GEH, Bayoxide E33, CFH12) during the process of removing antimony from water. Pilot tests showed that the use of iron-based sorption materials could possibly decrease the antimony content in water to the values limited for drinking water. At an average concentration of antimony in raw water of 58.3 ...


    By IWA Publishing

  • One step, low pH iron and organics removal - Case Study

    Review For over seven years, the semiconductor facility performed routine on-site cleans of their reverse osmosis (RO) membranes using RoClean P111 with good results. However, over a six month period in 2015, membrane cleaning frequency increased to once a month and permeate flows could not be sufficiently restored. An Avista application specialist visited the site to personally monitor the ...


    By Avista Technologies

  • Removal of arsenic and iron removal from drinking water using coagulation and biological treatment

    Effects of biological activated carbon (BAC), biological aerated filter (BAF), alum coagulation and Moringa oleifera coagulation were investigated to remove iron and arsenic contaminants from drinking water. At an initial dose of 5 mg/L, the removal efficiency for arsenic and iron was 63% and 58% respectively using alum, and 47% and 41% respectively using Moringa oleifera. ...


    By IWA Publishing

  • Case Study: Iron Foundry

    The foundry recycles engine blocks to make iron pipe. They have a 350-gpm closed loop water reuse system that is used to cool the molds as part of the manufacturing process. The facility was using a coagulant and a flocculant to try and reduce the solids carryover from their clarifier. The solids in the reuse water were building up in their system filters causing intermittent downtime (downtime ...


    By Integrated Engineers Inc.

  • Identification of the bacterial population in manganese removal filters

    The aim of this study was to identify bacteria present in ripened manganese removal filters for drinking water production. The bacterial population was identified with ‘next generation’ DNA sequencing, and specific bacteria were quantified with quantitative polymerase chain reaction (qPCR) and characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry ...


    By IWA Publishing

  • Continuous phosphorus removal from water by physicochemical method using zero valent iron packed column

    Excessive phosphorus in aquatic systems causes algal bloom resulting in eutrophication. To treat wastewater including effluent of wastewater treatment plant containing various amounts of phosphorus, a series of continuous experiments on removal of phosphorus from water were performed by using an electrochemical method. The spherical type of zero valent iron (ZVI) and silica sand were packed at ...


    By IWA Publishing

  • The on-site feasibility study of iron and manganese removal from groundwater by hollow-fiber microfiltration

    The aim of this research was to investigate the removal of iron and manganese from groundwater by aeration, chlorine oxidation and microfiltration (MF). Pilot-scale experiments were performed at the Chang-Hua Water Treatment Plant in Taiwan. The raw waters contained soluble iron (0.4 mg/L) and manganese (0.5 mg/L) which were oxidized by chlorine and then filtered by hollow-fiber PTFE-MF. The ...


    By IWA Publishing

  • Removing heavy iron deposits improves effluent output and Decreases costs - Case Study

    The Problem At a local manufacturing facility, ground water pumped with #6 oil was heavily impacted with iron deposits. Heated water and product was being pumped into the existing oil water separator, but the iron fouling the unit and the downstream carbon filter and dry well limited flow. Frequent carbon replacement was required and was very costly. The ...


    By Hydro Quip, Inc. (HQI)

  • Monitoring of a pilot GFO filter for removal of low-concentration arsenic in water

    Many water treatment plants (WTPs) were designed to remove ammonia, iron, and manganese simultaneously using biofilters. In some cases (especially in the Pianura Padana area, in Italy) such plants were designed without a specific treatment stage for arsenic removal because its concentration in the groundwater (i.e. 10 to 20 μg/L) was lower than the previous maximum contaminant level (MCL) of ...


    By IWA Publishing

  • Removal of hydrocarbons from synthetic road runoff through adsorptive filters

    Compact filter systems, which are installed to significantly reduce the load of pollutants from road runoff, are very promising treatments for urban runoff. The objective of this research was to evaluate the effectiveness of activated carbon, activated lignite, zero valent iron, exfoliated graphite, amorphous ferric hydroxide, and activated alumina at removing petrol hydrocarbons from synthetic ...


    By IWA Publishing

  • Limited effectiveness of household sand filters for removal of arsenic from well water in North Vietnam

    Since well water utilized for domestic purposes in the Red River Delta of North Vietnam has been reported to be polluted by arsenic, barium, iron, and manganese, household sand filters consisting of various components are used. Information regarding the effectiveness of various sand filters for removal of the four toxic elements in well water is limited. In this study, arsenic levels in 13/20 ...


    By IWA Publishing

  • Project profile - Village of Corona, NM iron and manganese reduction

    Background In the fall of 2008, AdEdge was selected by Village of Corona, NM to design, manufacture, and startup a water treatment system for the removal of iron and manganese. The water system that serves approximately 100 connections at Corona was plagued by high iron and manganese in the main water supply with iron from 0.26 – 2.8 mg/L and manganese levels from 0.094 - 0.17 ...

  • Co-optimisation of phosphorus and nitrogen removal in stormwater biofilters: the role of filter media, vegetation and saturated zone

    Biofilters have been shown to effectively treat stormwater and achieve nutrient load reduction targets. However, effluent concentrations of nitrogen and phosphorus typically exceed environmental targets for receiving water protection. This study investigates the role of filter media, vegetation and a saturated zone (SZ) in achieving co-optimised nitrogen and phosphorus removal in biofilters. ...


    By IWA Publishing

  • How to Treat Water and Remove Arsenic

    Arsenic is a naturally occurring element from the earth’s crust. Around the world, many countries have groundwater that is steeped in arsenic. Until recently, governments haven’t realized just how bad arsenic was for people, even in minute concentrations. In 2001, the US Environmental Protection Agency felt it necessary to lower the drinking water arsenic standard from 50 parts ...

  • Project profile - Lummi Island, Washington arsenic, iron, sulfide treatment system

    Background In mid 2004, AdEdge Technologies Inc. (AdEdge) was selected by Miller Water Association and Anvil Corporation to assist in the design of a fullscale arsenic treatment project for this small community. Arsenic levels are alarmingly high at 0.18 mg/l, 18 times higher than the new Federal standard of 0.010 mg/l. In addition to arsenic, many of the homeowners using the water ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you