jet aeration technology Articles

  • Key Design Parameters for a Jet Aeration System

    Three Questions To Answer When Adding A New Aeration System Installing an aeration system for your industrial wastewater treatment plant can be a complex process. To make it more efficient, it is important to provide the correct information to your aeration system supplier from the very beginning. Here are three simple questions you should be able to answer when your aeration supplier ...


    By KLa Systems, Inc.

  • KLa Jet Aerators/Mixers for Large Diameter Equalization Tanks - Case Study

    Flow Equalization Many municipalities are facing the challenge of having to equalize large volumes of storm water sometimes mixed with raw sewage in order to continuously meet their permit limitations. The equalized flow is stored during a storm event and then slowly diverted to the treatment facility when influent flows return to normal levels.  In the past few years the need ...


    By KLa Systems, Inc.

  • 10 Questions (And Answers) That May Change the Way You Aerate

    Slot Injector: How does the slot-shaped nozzle of the Slot Injector™ aeration system improve performance? The slot shaped nozzle and mixing chamber provide a larger shear surface for mass transfer than a circular jet of identical area. This unique shape results in a high percentage of gas dissolution and superior oxygen transfer rates with a 10-20% reduction in energy usage ...


    By KLa Systems, Inc.

  • KLa Slot injectorâ„¢ Aeration system assists cheese & Whey production plant solve its Nitrogen discharge challenge - Case Study

    The Challenge A gourmet cheese, whey protein, and lactose production facility located in the Midwest had been utilizing a land application system for effluent discharge for over 40 years. Using a combination of ridge and furrow and spray irrigation, the plant had many years of success applying their wastewater to the land. However, as the gourmet cheese products gained in popularity along ...


    By KLa Systems, Inc.

  • Injecting Innovation Into The Food And Beverage Industry

    Not all water treatment needs are the same. That’s why it’s imperative to work with those that understand the subtle differences that make each industry unique. For food and beverage companies, that means aligning with a company focused on oxygen transfer with a track record of innovation in jet aeration and mixing. Water Online spoke with KLa Systems to discuss its success within the ...


    By KLa Systems, Inc.

  • Industrial Tainan, Taiwan case study

    Project Name: Touch Panel Manufacturer WWTP Location: Tainan, Taiwan Type of Plant: Industrial - Opto-electronic Consultant: Eco-firm Environmental Technology Co. Ltd. Technology Used: CFAS & DAF & Slot Jet Injectors Biomedia Used: Biowater BWT-35 Operational ...


    By Biowater Technology

  • Membrane Bioreactor for Sanitary Landfill

    The Problem The county of Warren NJ owns and operates a sanitary landfill in Oxford Twp, NJ. The facility generates an average of 50,000 gallons per day of leachate, with peaks to 100,000 gallons per day. The facility was discharging to a local POTW from their lagoon, but they were facing requirements for nitrogen removal from the POTW and needed a new system to provide ...


    By Dynatec Systems Inc.

  • Palm Valley Water Reclamation Facility, Goodyear, Arizona: A Real `PERC`

    Pacific Environmental Resources Corp. (PERC) is a water quality service provider offering clients a total solution in partnership with nature and the surrounding environment. PERC is a leading design / build / operate company in the wastewater industry. PERC’s total solution provides a scalable and modular design delivered under a single contractual agreement. Clients enjoy the benefits of ...


    By Kaeser Kompressoren GmbH

  • Dynatec Provides MBR System for Hazardous Landfill

    The Problem A hazardous waste landfill in Belleville, MI, owned by the Environmental Quality Company had a problem. They needed to develop a treatment process to remove COD, high TDS, heavy metals, phenol, PCB’s, Ammonia, and Molybdenum from the landfill leachate. Current treatment comprised of chlorination and activated carbon treatment was very costly. ...


    By Dynatec Systems Inc.

  • Moving difficult-to-handle bulk materials with flexible screw conveyors

    Flexible screw conveyor systems can be engineered to transport bulk materials that tend to pack, cake, smear, break apart or fluidize, and can prevent the separation of blended products. Flexible screw conveyors (Fig. 1) are suitable for most bulk materials, from sub-micron powders to large pellets, both free-flowing and non-free flowing. They are capable of conveying bulk materials at any angle ...


    By Flexicon Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you