jet filter Articles

  • 5 Must Do Steps to Keep Your Jet Aeration System Running Smoothly

    Sustained low dissolved oxygen levels in an aeration tank can cause a host of problems — including difficulties in maintaining soluble BOD (biochemical oxygen demand), reduced nitrogen removal efficiency, and challenges with biomass separation. A jet aeration system offers a solution, utilizing both a pump and blower to meet the oxygen transfer requirements of a biological process. A well ...


    By KLa Systems, Inc.

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • Filter Your Air with Cartridge Dust Collector

    A cartridge dust collector uses filtering cartridges and is a self-cleaning dust collector. The cartridges it uses are made from synthetic fibers and cellulose that is treated chemically. This ensures the particles are efficiently collected without forming an excessive pressure drop in the system. Structure A cartridge dust collector uses an air-jet cleaning structure to preserve ...


    By ProVent, LLC

  • Rolled Filters Move Filtration in a New Direction

    When selecting filtration technology, industrial users have long wrestled with the tradeoffs of dirt-holding capacity versus particle selectivity or quick-and-dirty change-outs versus process time. For many applications, a self-contained rolled filter offers an effective solution to both problems. Constructed with polypropylene hardware and various media in a spiral-wound design, rolled filters ...

  • Advantages of cleaning without a venturi in baghouse collectors

    ABSTRACT: Background The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In order to clean a row of bags in a reverse pulse jet baghouse first the flow of filtered air must be momentarily stopped and then back flushed or “induce” air to knock the dust cake off the outside of the filter media. A venturi at the top of the ...


    By Scientific Dust Collectors

  • Energy efficiency waste extraction upgrade against the clock

    When Impacts project team were challenged with the gauntlet of replacing a twin extraction system at Greenshires in a 24-hour shutdown they knew they had a challenge. After many years of suffering unreliability of an environmentally unfriendly waste system, Greenshires - Leicester, had no option but to replace it with the latest extraction system solutions. Impact Air Systems were called to the ...


    By Impact Air Systems

  • The Use of Particulate Emission Monitors to Support Arrestment Plant Operation and Upkeep

    The operation of filtration type arrestment plant can be optimised by the effective use of Particulate Emission Monitors (eg Filter Leak Monitors and Filter Performance Monitors). Particulate Emission Monitors are installed throughout the broad spectrum of industrial processes to satisfy regulations (IPPC, Part B Guidance Notes, WID and LCPD) for emission limit enforcement. In addition, where ...


    By PCME Ltd

  • Ineffective cleaning in generic baghouses

    ABSTRACT: Background In a typical “generic” baghouse application, the cleaning is accomplished by back-flushing the filter with compressed air that travels through an orifice hole in a purge tube (blow pipe) and through a venturi. A typical generic cleaning system allows dust to be filtered at an air-to-cloth ratio of 5:1. That means for every 5 CFM of airflow, there is 1 square foot ...


    By Scientific Dust Collectors

  • Improving the cleaning cycle in baghouse collectors

    ABSTRACT: Background The reverse pulse jet baghouse has been around for over 45 years and the cleaning cycle has not changed very much since that time. The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In a generic baghouse, the cleaning system is comprised of a blowpipe that is located typically approximately three inches above ...


    By Scientific Dust Collectors

  • When productivity is reduced by the waste extraction system, its time to take action.

    Woodford litho called upon Impact Air Systems to review their existing waste extraction system in preparation for the installation of an additional new binding line.  The existing waste system, supplied by a competitor, delivered the waste to a single compactor and was not capable of removing the additional waste from the new binder but also blocked frequently, reducing productivity of the ...


    By Impact Air Systems

  • Compacting waste - Case Study

    Throw away little things and save big bucks? It hardly seems likely, but that's just what the U.S. Air Force is doing. At Randolph AFB, TX, they are putting usedand hazardous-air filters into a state-of-the-art industrial compaction machine and saving thousands of dollars in hazardous waste disposal. The air filters contain aircraft paint removed by plastic media blasting (PMB). Small plastic ...


    By Waste Control Systems Inc

  • New Nozzle Technology “Cleaning More with Less”

    This technical paper will explain the new nozzle technology developed by Scientific Dust Collectors that allows high air-to-cloth ratio baghouses to use 80psig of compressed air instead of the industry standard 100psig.   The reverse pulse jet baghouse has been around for over 50 years and the cleaning cycle has not changed very much during that time. The cleaning cycle is the most important ...


    By Scientific Dust Collectors

  • Fine particle capture in biomass boilers with recirculating gas cyclones: Theory and practice

    This paper addresses the theoretical development and experimental validation of optimized recirculating reverse-flow gas cyclones. The simulation of these systems is based on the predictive properties of a finite diffusivity model, modified to include partial recirculation of the cyclones' emissions. Experimental validation was obtained at laboratory and pilot scales at low temperatures (up to ...

  • Advances in control of PM2.5 and PM2.5 precursors generated by the combustion of pulverised coal

    Particulate matter smaller than 2.5 mm in aerodynamic diametre (PM2.5) from coal-fired boilers is composed of directly emitted (primary) particles and particles formed from precursors (secondary particles). Technologies to reduce emissions of precursors to secondary PM2.5 emitted by coal-fired utility plants include wet and dry flue gas desulphurisation (FGD). Limestone forced ...


    By Inderscience Publishers

  • Cycle Stop Valve replaces four Variable Speed Pool Pumps case study

    This pool has 4 water features, a slide, a waterfall, a spa cascade, and a wet wall. I required the ability to run each of these water features independently. This pool also has four cleaning modes, two sets of in floor cleaning nozzles, skimming, filtering, and vacuuming. In addition this pool also has a 50 foot zero entry lip. In order to accommodate all the above a typical configuration would ...


    By Cycle Stop Valves, Inc.

  • Pilot and Industrial-Scale Experimental Investigation of Numerically Optimized Cyclones

    A new geometry of reverse-flow gas cyclones obtained by numerical optimization was shown at the laboratory scale to be significantly more efficient than other high-efficiency designs. However, it is usually recognized that experimental results obtained with laboratory-scale or sampling cyclones cannot be extrapolated to pilot or industrial scales. The present paper confirms, at these larger ...

  • Lanes cleans Cascade

    It is not just drains that benefit from Lanes’ cleaning skills. Earlier this year, the team was asked to help spring clean the Grand Cascade, a spectacular water feature at The Alnwick Garden, one of the most popular visitor attractions in the UK. The Grand Cascade is the largest water feature of its kind in the country, with 7260 gallons of water per minute tumbling down a series of 21 ...


    By Water Active Ltd

  • Laboratory, pilot and industrial-scale validation of numerically optimized reverse-flow gas cyclones

    This paper addresses the experimental validation of the optimum design of reverse-flow gas-cyclones, obtained through the solution of a numerical non-linear optimization problem, viz. maximizing cyclone collection. The simulation model is based on the predictive properties of a finite diffusivity model, where the particles' turbulent dispersion coefficient is estimated through an empirical ...

  • Aviation fuel cleanliness

    This autumn sees the launch of the second edition of the EI’s handbook, 1550; a title which has become a key industry reference for everyone involved in handling aviation fuel since the first edition was issued in 2007. Martin Hunnybun, EI Technical Team Manager – Fuels & Fuel Handling, describes the new content. With over 20 specified performance parameters, jet fuel is one of ...


    By Energy Institute (EI)

  • Short- and long-term fouling characteristics of reverse osmosis membrane at full scale leachate treatment plant

    This research is focused on characterizing the foulants on a reverse osmosis (RO) membrane taken from a full-scale leachate treatment plant in Thailand. The system consists of a physico-chemical pre-treatment unit and RO system and has been in operation for 2 years. Ferric chloride (FeCl3) was added to the open-jet sedimentation tank at 2.0–2.5 g/l dosage for chemical coagulation. The supernatant ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you