jet filter Articles

  • Monitoring fuels in Stormwater - Case study

    The Situation A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills. These facilities prevent out of ...

  • Short- and long-term fouling characteristics of reverse osmosis membrane at full scale leachate treatment plant

    This research is focused on characterizing the foulants on a reverse osmosis (RO) membrane taken from a full-scale leachate treatment plant in Thailand. The system consists of a physico-chemical pre-treatment unit and RO system and has been in operation for 2 years. Ferric chloride (FeCl3) was added to the open-jet sedimentation tank at 2.0–2.5 g/l dosage for chemical coagulation. The supernatant ...


    By IWA Publishing

  • Stormwater Solids Reduction for NPDES Permits

    Finally obtaining a National Pollution Discharge Elimination System (NPDES) Permit is often a relief but is by far not the end of the story. Meeting the requirements of that permit often proves to be quite difficult and stiff fines are freely doled out to those who fail to meet regulatory limits. For one Midwest jet propulsion manufacturing facility, the issue of total daily solids discharge ...

  • Case study - City of Montreal upgrade of Atwater and Des Baillets water treatment plants

    Sidestream Venturi Injection—Basin Nozzle Manifold Contacting System. Montreal, Quebec, Canada The Problem: In 2001, a water quality audit revealed that two of the largest drinking water plants in the City of Montreal were out of compliance with Quebec’s latest water quality rules. In response to the audit, the city upgraded the 1,400 MLD Atwater and the ...

  • Weston Unit 4 - Case study

    Wisconsin Public Service Wausau, Wisconsin Plant Owner Wisconsin Public Service Plant Name Weston Unit 4 Location Near Wausau, Wisconsin B&W Scope ...


    By Dürr Megtec LLC

  • Case study - Bespoke Solutions

    PROJECT 700kg/h animal remains incineration project in accordance with EU WID (Waste Incineration Directive 200/76/EU) Chrzanów , Poland PROJECT DESCRIPTION The purpose of the plant was a combined waste disposal / energy recovery. In-stalled at a large meat processing plant the plant was designed to process approxi-mately 700kg/h per of ...

  • SCS - Spiral Channel Screen

    Here we grow again! More new products from Arlat Arlat releases it’s ‘SCS’ Spiral Channel Screen, for use in small channels and Septage Receiving stations. Ready for release this year, Arlat is adding another screen design to their product line up. The SCS is designed for channels that are 2’ (24”) in width or smaller. Arlat has received numerous call from sales representatives and ...

  • Impact lead the way in paper and glass separation

    Impact Air Systems was recently contacted by one of the UK's leading recycling led waste management companies to help them improve the process following the recent introduction of domestic glass into the material stream. The company involved have requested to remain anonymous, but currently operate 6 large scale operations in the UK.   We were called to their facility in the West ...


    By Impact Air Systems

  • Monitoring Hydrocarbons in Wastewater - Case Study

    The Situation A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from ...

  • Dynatec Provides MBR System for Hazardous Landfill

    The Problem A hazardous waste landfill in Belleville, MI, owned by the Environmental Quality Company had a problem. They needed to develop a treatment process to remove COD, high TDS, heavy metals, phenol, PCB’s, Ammonia, and Molybdenum from the landfill leachate. Current treatment comprised of chlorination and activated carbon treatment was very costly. ...


    By Dynatec Systems Inc.

  • How can I make my lab greener? 5 tips to reduce your lab’s carbon footprint

    Many laboratories want to make their operation more environmentally friendly and reduce their carbon footprint. The 5 steps below are a good starting point for simple changes to get closer to being a green lab We’ve been reading the great tips and ideas on mygreenlab.org to reduce the carbon footprint of your lab. Why not try these simple changes to ...


    By Camlab Limited

  • Case study - GRO in soil at gasoline UST site

    These case studies show the performance using Sitelab’s UVF-3100 analyzer testing gasoline range organic hydrocarbons.  This includes benzene, xylene, BTEX and other volatile petroleum compounds in the GRO or VPH C6 to C10 hydrocarbon range. When calibrated using Sitelab's GRO calibration kit (CAL-025), the UVF analyzer produces test results that correlate well to laboratory ...


    By Sitelab Corporation

  • Controlling scale deposits in the pulp & paper industry

    The pulp and paper industry is one of the heaviest users of water within the North American industrial economy, requiring on average 54 cubic meters of water per metric ton of finished product.  As water is used in nearly every part of the manufacturing process, accumulation of scale is a phenomenon that can occur in all pulp and paper making processes. This occurs even with the purest water ...

  • Taking matters into hand - Case Study

    Biofuels must be up to scratch as contaminated or improperly blended fuel can damage a  company’s bottom line. To ensure product quality several options exist including laboratory analysis, field test kits and portable lab instruments.  Laboratory testing would be the ideal solution if everyone had the budget and the time to wait for the results.  But in a market where time ...


    By Spectro Scientific

  • Novel perchlorate treatment at Edwards sparks national interest

    Untitled Document People from across the nation came to Edwards on May 14 to see a new ...


    By J.C. Palomar, Inc.

  • Metals: Scrubber System Removes HCL from Exhaust Case Study

    Although Indiana’s environmental protection agency has not yet added hydrochloric acid (HCl) standards to its Title 5 regulation of emissions sources, Allomatic Products Co., Sullivan, IN, was determined to erase HCI vapors from its plant discharge. In the mixed industrial/ residential neighborhood where its manufacturing plant is located, Allomatic wanted to be known as a good neighbor. ...


    By CR Clean Air Group, LLC

  • Automotive: Scrubber system removes HCL from Exhaust case study

    Although Indiana’s environmental protection agency has not yet added hydrochloric acid (HCl) standards to its Title 5 regulation of emissions sources, Allomatic Products Co., Sullivan, IN, was determined to erase HCI vapors from its plant discharge. In the mixed industrial/ residential neighborhood where its manufacturing plant is located, Allomatic wanted to be known as a good neighbor. ...


    By CR Clean Air Group, LLC

  • Reaching underground resources

    Accessing critical resources such as geothermal energy and natural gas requires drilling — an expensive, energy-intensive, messy process with today's technology. An MIT team has been looking into a more elegant approach. Instead of grinding rock to bits, they would use a continuous beam of energy to vaporize it and then blow out the tiny particles that form with a high-pressure stream of ...

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Moving difficult-to-handle bulk materials with flexible screw conveyors

    Flexible screw conveyor systems can be engineered to transport bulk materials that tend to pack, cake, smear, break apart or fluidize, and can prevent the separation of blended products. Flexible screw conveyors (Fig. 1) are suitable for most bulk materials, from sub-micron powders to large pellets, both free-flowing and non-free flowing. They are capable of conveying bulk materials at any angle ...


    By Flexicon Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you