jet mixer Articles

  • 4 Key Design Criteria for Jet Mixers

    Jet mixers are widely used in both municipal and industrial wastewater treatment facilities to blend the plant influent and suspend light organic solids in circular equalization tanks.  Other applications for these powerful hydraulic mixers include mixing anoxic tanks and anaerobic reactors with the latter application being for industrial waste streams only. Jet ...


    By KLa Systems, Inc.

  • KLa Jet Aerators/Mixers for Large Diameter Equalization Tanks - Case Study

    Flow Equalization Many municipalities are facing the challenge of having to equalize large volumes of storm water sometimes mixed with raw sewage in order to continuously meet their permit limitations. The equalized flow is stored during a storm event and then slowly diverted to the treatment facility when influent flows return to normal levels.  In the past few years the need ...


    By KLa Systems, Inc.

  • KLa Systems Jet Mixers for Anaerobic Treatment Process Case Study

    The Challenge Many food processing industry wastewaters contain high concentrations of readily degradable organic material and over the past twenty years the implementation of anaerobic treatment processes has gained popularity as the preferred first stage biological process. Anaerobic processes have many advantages over aerobic processes and the two key ones are very low production of ...


    By KLa Systems, Inc.

  • Mixers and Flowmakers: Cleaning of stormwater tank

    Deposits in an 18 m diameter stormwater tank made it necessary to clean the tank several times a year. A POD-I mixer was installed. The mixer has an 11.0 kW motor and the number of propeller revolutions is 1500. The relatively small propeller creates a strong, concentrated jet. Operation can take place at a very low liquid level - high velocities are created at the bottom -and the deposits ...


    By Landia

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • 10 Questions (And Answers) That May Change the Way You Aerate

    Slot Injector: How does the slot-shaped nozzle of the Slot Injector™ aeration system improve performance? The slot shaped nozzle and mixing chamber provide a larger shear surface for mass transfer than a circular jet of identical area. This unique shape results in a high percentage of gas dissolution and superior oxygen transfer rates with a 10-20% reduction in energy usage ...


    By KLa Systems, Inc.

  • Ultrasonics: a sound mixing technology

    When liquid mixing, dispersing or homogenising is required in the lab, people tend to think of rotary mixers, although this traditional technology has limitations that can be costly both in time and material. Ultrasonics is the preferred innovative technology for various mixing applications in the lab. It combines extremely efficient and ultra effective high shear power with the added benefit of ...

  • Rotary batch blenders help DIP get pre-mixes to market fast

    Mixers are more efficient than double-cone units Ductil Iron Powder (DIP), Buzau, Romania, was established in 2000 as a spin-off of Ductil Steel. Its products are iron and alloyed powders for use in powder metallurgy and welding applications. The plant for making the iron powders began operation in 1995, and by 2000 it reached its current capacity ...

  • Cavitation leads to perfect mixes

    Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...


    By GlobeCore Blending

  • Cavitation leads to perfect mixes

    Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...


    By GlobeCore Blending

  • Injecting Innovation Into The Food And Beverage Industry

    Not all water treatment needs are the same. That’s why it’s imperative to work with those that understand the subtle differences that make each industry unique. For food and beverage companies, that means aligning with a company focused on oxygen transfer with a track record of innovation in jet aeration and mixing. Water Online spoke with KLa Systems to discuss its success within the ...


    By KLa Systems, Inc.

  • M-Coating – drain & sewer spraylining the economical solution to manhole shaft renovation

    M-Coating – Procedure for renovating a manhole shaft using ERGELIT Kombina KS M-Coating is a new, innovative renovation technique for both round and rectangular drainage shafts from 500mm to 1200mm. It is based on over 15 years of the Hermes company’s experience. Using this centrifuge spray technique, walls of shafts up to 10 metres deep can be coated to a realistic thickness. ...


    By HERMES Technologie Ltd.

  • KOSUN Decanting Centrifuges Sent to South Asia

    Recently, three KOSUN DC355 decanting centrifuges  ordered by a famous South Asian oil company have successfully arrived at Shenzhen Port for shipment. This is the second time for the customer to buy solids ...


  • maintenance of the vibrator motor for KOSUN decanter centrifuge

    Solids control system is the indispensable sector in oil & gas drilling oeration, consists of drilling fluids circulating tank, drilling fluids purification equipment where shale shaker,vacuum degasser,desander, desilter,decanter centrifuge,centrifugal&nbs ...


  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • The use of oilfield shale shaker

    Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since drilling fluids solids control is vital in keeping down costs associated with the drilling ...


  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Economy in car-making - powder metallurgy

    Powder metallurgy (PM) has made a major contribution to the technology of automotive manufacture over the past 70 years. It has been and is still the fastest-growing metalworking technology. Today, on average, it provides about 10kg of the total components of a car — more in the US, where cars are larger and use automatic transmissions in nearly all units sold and less in Europe and Japan, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you