laboratory hydrogen generation system Articles

  • Performance of Palladium Diffusers for Reliable Purification of Hydrogen

    Hydrogen generators are now becoming an essential component in many laboratories with greater gas consumption levels. Generators are considered to be preferable to cylinders, particularly because of the safety concerns about having high pressure hydrogen in the laboratory working environment. Hydrogen generator systems typically produce Hydrogen with a two-phase system. Hydrogen is first ...

  • The Use of Hydrogen Release Compound (HRC) for CAH Bioremediation.

    Hydrogen Release Compound (HRC™) is a simple, passive, low-cost and long-term option for the anaerobic bioremediation of chlorinated aliphatic hydrocarbons (CAHs) via a reductive dehalogenation pathway. Applications to other classes of chlorinated compounds that are anaerobically degradable by this mechanism are under investigation. HRC should be viewed as a tool for the enhancement of natural ...


    By Regenesis

  • All in One Unit for GC Applications

    Leman Instruments is a leading European company, specialised in standard products, OEMs and in custom designed realisations involving high purity H2, N2, zero air, combined solutions for FIDs, GCs, purge air generators, CH4 & CO2 scrubbers, N2 and multigas for LCMS with high level of communications involving Ethernet, USB, RS 485 and ...


    By Leman Instruments SAS

  • Radiation Water Monitor in Real-Time and Continuous at Jefferson NL 2006

    Jefferson National Laboratory is a high tech laboratory located on a beautiful campus in suburban Virginia. Their research is centered on their high-energy electron accelerator. Energies generated are as high as 6 Gev continuous with currents up to 200 micro Amps. Where does the high-energy accelerator beam go after smashing atoms in the experimental sample? It impacts into a tank of purified ...


    By Technical Associates

  • Industrial applications of new sulphur biotechnology

    The emission of sulphur compounds into the environment is undesirable because of their acidifying characteristics. The processing of sulphidic ores, oil refining and sulphuric acid production are major sources of SO2 emissions. Hydrogen sulphide is emitted into the environment as dissolved sulphide in wastewater or as H2S in natural gas, biogas, syngas or refinery gases. Waste streams containing ...


    By Paques B.V.

  • US EPA airmOzone TESTS

    The US EPA leads Photochemical Assessment Monitoring Stations programs (PAMS) for more than 15 years and many equipments used at PAMS sites are old and need to be replaced. That is why US EPA has conducted a material review of fully automatic GC units able to by analyze the 56 VOC ozone precursors of the PAMS list. They planned to perform an evaluation in two steps : - Laboratory evaluation of ...


    By Chromatotec Group

  • Wastewater-Solids Dewatering Odor Control - Case Study

    Background The Milan Wastewater Treatment Plant, located just south of Moline, Illinois, is a 1.7 MGD (6,434 m3/day) activated sludge facility with an average wastewater flow of 700,000 gpd to 800,000 gpd. This facility dewaters primary sludge using a belt filter press (Figure 1). The press operates an average of three times per month, 8 hours per day at a pump rate of 100 gpm. The ...


    By Carus Corporation

  • Detection and measurement of toxic gases from destructive testing of batteries

    Problem Statement New formulations of organic-compound-based batteries for vehicle use must be tested for release of potentially harmful and toxic gases if crushed in accidents. Potential gases include hydrocarbons, fluorocarbons, and hydrogen fluoride, released within seconds of an incident. Actual time-resolved and quantitative data are required from destructive testing to ascertain ...


    By CIC Photonics, Inc.

  • Common Treatment Technologies for Explosives in Ground Water, Surface Water, and Leachate

    Explosives-contaminated process waste waters can be subdivided into two categories: red water, which comes strictly from the manufacture of TNT, and pink water, which includes any washwater associated with load, assemble, and pack (LAP) operations or with the demilitarization of munitions involving contact with finished explosive. Despite their names, red and pink water cannot be identified by ...

  • Harnessing The Power Of Microbes

    University researchers are advancing both the understanding and scalability of a biological process where bacteria living under anaerobic conditions consume organic waste and generate electrons and protons that are tapped for electricity production.IMAGINE a self-sustaining battery that never runs out of juice. While the notion may sound far-fetched, Dr. Leonard Tender at the Naval Research ...


    By BioCycle Magazine

  • Process analytics optimizes crude gas processing for the production of fine chemicals at Lonza – Case Study

    Fine chemicals are used as active ingredients or additives in the pharmaceutical and food & beverages industries, as well as in agriculture. The cracking of raw materials such as light virgin naphtha or liquefied gas results in intermediate products (ethylene, hydrogen, methane, CO2). At the end of the process chain, these can provide highly pure materials such as niacin (vitamin B3) or ...

  • Corrosion In Perishables Containers

    The presence of corrosive gases inside containers used for transporting perishables can quickly cause chemical reactions within the metals, producing corrosion - even at very low concentrations (ppm). The main corrosive gases involved are acid ...


    By Bioconservacion SA

  • A Chemical Dynamics Model for CAH Remediation with Polylactate Esters.

    ABSTRACT: The polylactate esters of sorbitol, xylitol and glycerol are a class of new chemical compounds that slowly release lactic acid into groundwater. The lactic acid is biotransformed into pyruvic acid and subsequently into acetic acid releasing hydrogen in both steps. The hydrogen is used by naturally occurring dechlorinating bacteria to reduce PCE to ethene by way of TCE, DCE and VC. A ...


    By Regenesis

  • Matching Oil in Water Analyses with Regulatory Methods - Case study

    When analyzing oil and grease in water while out in the field, it is important to use an EPA approved method and equipment. While the amount of oil in water is highly regulated, it can also be a challenging measurement. It is complicated by the fact that oil conies in many forms and the measurement is defined by the particular regulatory method. When EPA 1664 is the regulatory method, ...


    By Spectro Scientific

  • Syracuse, New York: AD Adds To Dog Treat Bakery’s Sustainability

    Full Circle Feed in Syracuse makes healthy, environmentally-sustainable dog treats with unused meats, vegetables, fruits, and breads from restaurant buffets that were prepared but not served. It recently won the grand prize of $10,000 in Green America’s Fall 2016 People & Planet contest in the category of sustainable products and services for pets and animals. “Full Circle Feed ...


    By BioCycle Magazine

  • pH Adjustment - A Primer

    A brief review of the definition of pH, the pH scale, and some of the chemistry involved in pH Adjustment systems is provided below. For some this may be trivial, yet for many others this may be useful. The information provided below is typical of the background information we provide in our training classes / seminars. By Definition pH is the measure of free hydrogen activity in water and can be ...


    By Digital Analysis Corp.

  • Chromatography Tips

    No.1 Gas Chromatography Tips  Our Founders and engineers of the company had accumulated more than 60 years experience in the research and development of HPLC instrumentation; HPLC column technology; mass spectrometer installation, training and services; chemical and biochemical separation, detection and quantification, Proteomics and cancer biomarker research and ...


    By AcuTech Scientific Inc.

  • Will your oil in water analysis method match the regulatory method?

    Anyone involved in field analysis of oil in water will continually get the question “Does your equipment match the regulatory method?” While the amount of oil in water is highly regulated -- it can also be a challenging measurement. It is complicated by the fact that oil comes in many forms and the measurement is defined by the particular regulatory method. When EPA 1664 is the ...


    By Spectro Scientific

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Electronic Water Treatment - An alternative solution to removing beerstone and limescale

    Beer contains 90% water and is the most important ingredient in determining its flavor.  Water contains calcium and is the most important mineral to the brewing process.  The levels of calcium in local water have determined the type of beer produced.  The different types of beer whether a light lager or a porter are for the most part due to the water profiles of the areas that made ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you