laboratory system Articles

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Laboratory Information Management Systems and Traceability of Quality Systems

    Today’s business environment places many demands on technical managers and corporate executives. At a time when global competition forces companies to introduce products at a faster pace with higher efficiency and productivity, quality systems like ISO and Six Sigma, stipulate rigorous testing documentation. Regulatory systems, such as Good Manufacturing Practices (GMPs) and Good Laboratory ...


    By STARLIMS Corporation

  • Laboratory test system to measure microbial respiration rate

    This study reports a sensible, accurate and economic method for continuous measuring microbial respiration. The measuring principle is an open system, with a continuous air-flow through. Evolved CO2 is absorbed and precipitated as carbonate by a Ba(OH)2 solution, causing a stoichiometrical decrease in ionic strength of the solution and in electrical conductivity. ...


    By Inderscience Publishers

  • Rutherford Appleton Laboratories

    The new Research Complex at Harwell Oxford is a multidisciplinary laboratory providing world leading facilities for new and cutting edge research in both life and physical sciences and the interface between them. Environmental issues were at the forefront of the building design with all energy use carefully monitored. An innovative Earth Tube has been buried along side the building to utilise ...

  • WinLims for environmental laboratories

    There are many different types of environmental laboratories testing diverse and varied samples, such as soils, waters, effluents, emissions, micro swabs, etc. A large proportion of these laboratories operate on a contract basis servicing numerous client companies, whilst others would be internal laboratories providing environmental analysis for the company site or group sites. To be able to ...

  • WinLims for contract laboratories

    Industry is looking more and more to outsourcing its analytical and testing needs to contract laboratories. This places on those laboratories a need for a flexible, yet structured and error-free, means of handling and reporting sampleinformation and results. There is a key requirement to handle customer contact records, production of quotations andinvoices, and ensure proven adherence to the ...

  • Paperless laboratories do better science

    I was reading an article today that appeared in Scientific Computing on May 19, 2014 entitled, “Paperless Laboratories Do Better Science”. I have been reflecting on the content of this article as it relates to our Labcore customers now and over the years and thinking our experience reinforces some of the authors main points. This blog post specifically focuses on the importance of ...


    By Poplar Solutions, LLC

  • Material control and accountability for laboratory biosecurity

    Laboratory biosecurity refers to a suite of measures to protect legitimate stocks of dangerous pathogens and toxins from being acquired by individuals with malicious intent. Intentional misuse presents a different problem than accidental misuse, which is the subject of laboratory biosafety. In particular, the material control and accountability (MC&A) component of laboratory biosecurity addresses ...


    By Inderscience Publishers

  • How Does a Laboratory Automation Needs Assessment Benefit Laboratory Information Management System (LIMS) Implementation and Operation?

    Many laboratories may have the expertise to translate manual processes and laboratory automation requirements into a detailed specification document for all of the system requirements, features and functions of a LIMS. However, that may not be the best utilization of their resources. In addition, this can be labor intensive and the laboratory personnel may be too close to the project and may not ...

  • The Five Factors of Smart Laboratory Success

    The Five Factors Research organizations are under pressure to cut costs while maintaining or increasing throughput. To improve their operations, many laboratories are considering investments in data management or support and automation systems like ELNs, LIMS or Robotics/HTS. Whatever the change that is introduced, there are many pitfalls on the way to delivery, roll-out and ...

  • One Click™ Titration in the Petrochemical Laboratory

    The Titration Excellence line combines application flexibility with most efficient operation in titration. This matches the requirements of an innovative company like Blaser Swisslube exactly. The most demanding applications are made quick and simple using the LabX titration PC software.  Powerful Evaluation Saves ...


    By Mettler - Toledo Int. Inc

  • Simple laboratory techniques improve the operation of RO pre-treatment systems

    Membrane failures are often caused by poor pre-treatment design and/or poor operation. Systems are frequently designed and built without a clear understanding of the chemistry of the feed water to be treated and the physical characteristics of the particulate matter it contains. The larger the system the more likely is some incident of pre-treatment failure, often at a high financial cost to the ...

  • Stable design of Takagi-Sugeno fuzzy controllers for a laboratory three-tank system

    This paper suggests a stable design approach dedicated to the Takagi-Sugeno fuzzy controllers for the water-level control of a laboratory three-tank system. The design approach is based on a simplified application of LaSalle's global invariant set theorem. An original stability analysis theorem offers sufficient inequality-type stability conditions that enable the controller design and tuning. ...


    By Inderscience Publishers

  • Environmental, Safety & Health Compliance System pays off for Brookhaven National Laboratory

    Brookhaven National Laboratory (BNL), one of ten national laboratories managed by the U.S. Department of Energy (DOE) Office of Science, is a world leader in scientific research. Its scientists are known for their work in nuclear and high-energy physics; environmental and energy research; neurosciences, medical imaging, structural biology and nano-technology. BNL conducts research that enhances ...


    By IHS

  • Comparative applications of bioreactor and shake-flask systems in the laboratory treatment of oily sludge

    This study investigates the remediation efficiencies of a locally fabricated bioreactor system and a shake-flask system, using samples of oily sludge with varying concentrations of NPK fertiliser. Hydrocarbon removal efficiency of 46% and 24.2% was recorded for the stirred slurries containing 15- and 0-g NPK, respectively, in the bioreactor; whereas values of 40.1%, 33.2% and 18.9%, respectively, ...


    By Inderscience Publishers

  • Laboratory validation of an ozone device for recreational water treatment

    Obtaining an accurate assessment of a treatment system's antimicrobial efficacy in recreational water is difficult given the large scale and high flow rates of the water systems. A laboratory test system was designed to mimic the water conditions and potential microbial contaminants found in swimming pools. This system was utilized to evaluate the performance of an in situ ozone ...


    By IWA Publishing

  • Contract laboratories benefits from LIMS flexibility

    The Matrix Gemini Laboratory Information Management System (LIMS) from Autoscribe is a versatile system that can meet the varied requirements of contract laboratories both large and small. In addition to ease of set-up for traditional LIMS activities through its unique ‘OneTime configuration tools’, Matrix Gemini offers bulk sample registration templates, multi-site use through its ...


    By Autoscribe Informatics

  • Forward osmosis desalination from laboratory to market

    A two-step forward osmosis (FO) desalination process combining both FO and reverse osmosis (RO) systems has been developed by the Centre for Osmosis Research and Applications at the University of Surrey and commercialised by Modern Water plc. In the FO + RO process seawater was used as feed water (FW) and a concentrated aqueous solution was used as a draw solution (DS). By taking ...


    By IWA Publishing

  • How to choose the best laboratory for your asbestos analysis

    Trustworthy, Trained, and Truthful are the 3T's that greatly influence one's decision while choosing a good asbestos lab - Is the data you are receiving accurate and can you TRUST the data being provided? Is an educated, experienced, TRAINED analyst analyzing your samples? Is the lab always TRUTHFUL and not hide any errors that might have occurred during the process? One can be assured of making ...


    By EMLab P&K

  • Case study - SP Fire Laboratory, Sweden

    Fire laboratory at SP Borås uses EnviBat’s Wet Electrostatic Precipitator technology (WESP) since 2007. Extremely low emissions and high availability are key advantages. Project: WetESP for Fire Laboratory Many fire tests are made in full scale. Example for fire tests can be engine rooms, vehicles, store houses, compartments etc. Most of the tests will include ...


    By Envibat AB

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you