landfill machine Articles

  • Landfill Compaction Test

    TANA E520 VS. BOMAG 1172-RB This compaction study has been conducted in Belvedere Landfill, Legoli, Italy. Compaction test was conducted between TANA E520 (52 ton) machine vs. Bomag 1175-BC (55 ton) machine. Test was done by Independent Surveyor Sauro Salvadori from STUDIO TECHNICO NESTI e SALVADORI (www.geolaser3D.com) and Belvedere Landfill ...


    By Tana Oy

  • Good machine management cuts operating expenses, extends landfill life for yakima county

    Millions of years past, according to geologists, volcanic eruptions in the Cascade Mountains left widespread deposits of volcanic debris around the southcentral Washington towns of Ellensburg and Yakima. One such deposit, the Ellensburg Formation, has over time become a dense, stubborn soil composed of clay and abrasive rock. For Wendy Mifflin, solid waste manager for Yakima County, and Dan ...


    By Waste Advantage Magazine

  • Cutting landfill costs - not capabilities

    The garbage business is generally a good indicator of the economy’s strength. And while the bad news is that waste tonnage is down at most landfills, the good news is that there is a bottom. Most of the drop is due to a slumping construction industry, compounded by less consumer buying. But the garbage business—like taxes and death—is relatively constant. Some landfills are ...


    By FINN Corporation

  • Tire Shredding: Alternatives to Landfills

    For many reasons, whole tires pose a major problem to landfills. The most obvious is the inefficient use of space. The actual rubber of a tire takes up only a small fraction of the space a tire occupies, and the rest of the space is wasted. A less obvious but far more serious problem is that tires may trap methane gasses when buried with other garbage in landfills. When this happens, the tires ...


    By ECO Green Equipment

  • Challenges at MSW Landfill Sites

    Covering the day’s trash at the landfill Today’s municipal solid waste (MSW) landfills are much more than places to dump household trash. They’re engineered facilities that are designed to hold and isolate the trash from the environment and are governed by both federal and state regulations. Landfill designers and operators face two main challenges ...


    By FINN Corporation

  • Franking machines and the environment

    Despite the fact franking mail requires a machine, this does not mean that they are extremely harmful to the environment. When looking at which franking machine to purchase make sure they are manufactured with concern for the environment both during, and after, their working life. In setting its own environmental emission objectives and targets via its management system the franking machine ...


    By Office Clearance Company Ltd

  • Landfill Leachate Treatment by Forced Circulation Vacuum Evaporation - Athens (Ano Liossia Landfill)

    This report describes how treatment of landfill leachate by means of forced circulation vacuum evaporation provided: an environmental benefit from use of biogas as power supply a big saving in disposal cost due to waste volume reduction a return on investment of less than two years Introduction Solid Waste Management in Greece has been remarkably upgraded during the last ...

  • Rebuilding compactor saves money and resources for Florida landfill

    Working with the local Caterpillar® dealer, the Volusia County, FL Recycling and Solid Waste Division has conserved money and resources by rebuilding its 836G compactor for a third life at the Tomoka Landfill. Ring Power, the Cat® dealer in northern and central Florida, performed the two rebuilds and maintains a close watch on the compactor as part of a Total Maintenance and Repair ...


    By Waste Advantage Magazine

  • Glenmore Landfill’s life expectancy increased for 12-15 years in Canada

    Ineffective compaction along with extensive use of cover soil are lowering the life expectencies of landfills. Aiming for better compaction is the easiest way to add more operation years for continuing revenues. For increasing the compaction efficiency, the city of Kelowna in Canada purchased a TANA E520 landfill compactor to Glenmore Landfill.  According to Ken Muller, the Solid Waste ...


    By Tana Oy

  • Glenmore Landfill’s life expectancy increased for 12-15 years in Canada

    To view Video Click Here Ineffective compaction along with extensive use of cover soil are lowering the life expectencies of landfills. Aiming for better compaction is the easiest way to add more operation years for continuing revenues. For increasing the compaction efficiency, the city ...


    By Tana Oy

  • Blending of would-be landfill turns out greener cement-based products

    The vision of a greener future for the construction industry motivates Andrew Dennis, an architect here who founded a company dedicated to producing environmentally friendly cement-based products. Instead of the heavy aggregates found in standard concrete, the materials made by GigaCrete Inc. include non silica based sands and byproducts of coal combustion, fly-ash and bottom-ash and recycled ...

  • Baler initiated recycling program at Donson Machine - Case Study

    Donson found a cleaner and more economic way to dispose of their waste, when buying af baler for cardboard and plastic waste. Donson Machine purchased a Bramidan B30 W baler when they looked for a better solution for their waste disposal. The vertical baler provided them with a resolution that saves both time and money. Placed in Alsip outside Chicago, Donson Machine is a manufacturer of ...


    By Bramidan Balers

  • Innovative use for a landfill compactor in crushing construction and demolition waste (C&D waste) - Case Study

    Expensive and diesel-hungry waste shredder led to an innovation in crushing construction and demolition waste (C&D waste). The compaction force of a twin drum design landfill compactor is unparalleled. When directed straight down onto the unsorted waste or landfill residue, the solid steel crushing teeth bite into the waste. The crushing is so efficient that the required fraction size is ...


    By Tana Oy

  • How Coconut Shell Charcoal Machine Manufacturers Are Turning Waste Into Profits

    As the population around the world grows every year, you will find a growing level of waste accumulating also. This waste piles up in landfills, rivers, and also the ocean and it's to the point of overwhelming the ability of nature to convert it into the environment. An enormous portion of the waste that humans create is actually the left agricultural byproducts in the millions of a great deal of ...

  • Canadian Nuclear Laboratories: Mobile Lindner Shredder converts scrap wood into compactable bulk material for the daily covering of landfills - Case Study

    At the beginning of 2016, Chalk River Laboratories (CRL), Ontario/Canada, which is part of Canadian Nuclear Laboratories (CNL), put into operation a Urraco 75 DK mobile shredder from Lindner (www.l-rt.com) on their site. On the landfill for non-contaminated waste, which is operated by the company's Decommissioning & Waste Management division, the shredder is in permanent use crushing wood, ...


    By Lindner-Recyclingtech GmbH

  • Using a track-type tractor (bulldozer) as a compactor

    Track-type tractor (=Bulldozer) is very popular machine in the landfill. TTT usually prepares the site by spreading the first waste layer because bottom layers of a new site can be damaged when real landfill compactor is used. During the normal landfill operation TTT is usually used for building access and haul roads and spreading cover soil. It can be also used as a feeding machine for landfill ...


    By Tana Oy

  • Being dense has its advantages

    At its root, the landfill business can be drawn down to a simple mathematical calculation. An operation receives a permit for a certain number of acres and is relegated to how deep it can dig and how high it can go. The result is the number of cubic yards of space that an operation has available to fill at the site. There is one key remaining variable—how the space is filled—and this ...


    By Waste Advantage Magazine

  • Assessment of recycling potential of municipal solid waste in Mauritius

    The purpose of this paper is to implement a Reverse Vending Machine (RVM) which would divert valuable resources to recycling centres. It assessed materials having attractive scrap values such as glass, PET bottles and Used Beverages Cans (UBC). In this paper, two scenarios were proposed, namely: Scenario 1 which dealt with the selling of recyclables to recycling plants and Scenario 2 which ...


    By Inderscience Publishers

  • Reduce costs while achieving an excellent and even compaction rate - Case Study

    Landfill operators want to achieve the best possible compaction rate with the least possible costs. This demands a lot from the compactors, especially a good compaction rate with the least amount of passes and minimal downtime. This was the situation where Sogliano Ambiente, an environmental engineering company located in Sogliano al Rubicone, Italy, chose Tana’s compactors over others for ...


    By Tana Oy

  • What Is a Vertical Baler?

    Vertical Balers are machines that are commonly used in the recycling industry to form and press old cardboard into There are a number of different types of balers, all of which are designed to compact waste materials. These machines are similar to compactors, with one important difference. Unlike compactors, balers are designed to produce blocks, or bales, of material for easy handling. In order ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you