large waste container Articles

  • What is a wastewater treatment system and how does it work?

    For industrial companies producing wastewater as part of it’s process, some type of wastewater treatment system is usually necessary to ensure safety precautions and discharge regulations are met. The most appropriate wastewater treatment system will help the facility avoid harming the environment, human health, and a facility’s process or products (especially if the wastewater ...


    By SAMCO Technologies, Inc.

  • Comparing nonreinforced and internally reinforced GCL

    Water is one of the most destructive forces on the planet, eroding everything from continents to human-made wonders. Water is also a vector by which contaminants spread from landfills and other waste reservoirs. Therefore, creating effective water seals has been a top concern in construction. For many years, factory-fabricated clay products have been the barrier of choice against water and other ...


    By Agru America, Inc.

  • Los Angeles County WRRF Embraces Codigestion

    Technology to produce food waste slurry key to project implementation - and helps generators comply with California organics recycling mandates. The Sanitation Districts’ JWPCP in Carson (CA) treats an average of 280 million gallons/day of wastewater. One of the two anaerobic digestion tanks above has been used for codigestion, with the second serving as the control. Photos ...


    By BioCycle Magazine

  • A Recycling Exemption for Oil/Water Separator Wastes at a Large Military Base in California

    The Health & Safety Code (HSC) in California contains provisions that can exempt a recyclable material from categorization as a hazardous waste if certain strict criteria are met. The Department of Toxic Substances Control (DTSC) is wary of 'sham' recycling and requires substantial proof of beneficial reuse for a facility to qualify for this exemption under HSC 25143.2. A large military ...


    By Coto Consulting, Inc.

  • Oil waste management through large scale landfarming: a case study

    The operational activities of the oil industry generate solid waste containing several classes of hydrocarbons. Landfarming enables the treatment of large amounts of oil waste through the disposal of waste in the reactive soil layer and hydrocarbon biodegradation. The aim of the present study was to evaluate oil waste management in a 1,000 m² of landfarming area. The operational method used in ...


    By Inderscience Publishers

  • Easy baling of extra large cardboard - Case Study

    Whenever genuine spare parts are needed for the vehicles made by large automobile manufacturers, the Rudolph Logistik Group in Baunatal, near Kassel/Germany, ensures they are available. Their spare parts logistics is an ingenious operation! This is now also true of the way they deal with the huge amount of waste cardboard generated. The contract logistics specialists found an optimal disposal ...


    By HSM GmbH + Co. KG

  • Remscheid pilot project: evaluation of a large scale trial of utilizing biodegradable waste bags for biowaste collection and treatment

    Separate collection of organic waste may be considered as an integral part of contemporary waste management schemes. In this function it became widely accepted in the last ten years. It pursues the idea of a recycling economy according to the European hierarchy of waste - prevent, reduce, recycle - and is aimed at closing nutrient cycles. Nevertheless, separate collection at source essentially ...


    By ORBIT e.V.

  • Cash & go machine for used beverage containers installed at a waste management site in Norrköping

    The first highly efficient self-service Cash & Go machine for used beverage containers has been installed in a waste management site in Norrköping - and the consumers are enthusiastic. Revolutionary new thinking - bulk feeding of unsorted used beverage containers In the month of June 2011 Anker Andersen A/S delivered their first Cash & Go reverse vending machine to ...


    By Anker Andersen A/S

  • Exergy analysis of the process of wet-process phosphoric acid production with full utilisation of sulphur contained in the waste phosphogypsum

    The wet-process phosphoric acid is produced by decomposition of phosphate raw materials with sulphuric acid. This gives a large amount of waste product-phosphogypsum. The thermochemical decomposition of phosphogypsum gives a gas rich in SO2. This gas is processed to obtain sulphuric acid, which is fed back into phosphoric acid production. The aim of this paper is to perform exergy analysis of the ...


    By Inderscience Publishers

  • Waste Disposal

    Introduction The final step in the waste management process is waste disposal, the permanent isolation of waste. Some wastes can be managed and disposed safely with existing facilities and proven methods. Other Department of Energy (DOE) wastes require more complex disposal facilities. DOE has conducted extensive research into alternative waste disposal methods and has concluded that deep ...

  • Geotube Containers Offer Innovative Solution for Disposal of Coal Mine Slurry Waste - Case Study

    TenCate helps North River Mine continue processing coal by utilizing first ever large-scale Geobag disposal method. In 2007, the North River Mine coal processing plant in Berry, Alabama was in a bind. Due to new regulatory restrictions, available area, and construction scheduling, the plant was facing a possible interruption of the primary disposal methods of its refuse - a waste stream ...

  • Major waste management company and cbio combine resources, to resolve a breach of ammonia consent, in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • Major waste management company and cleveland biotech combine resources to resolve a breach of ammonia consent in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • Processing Wastewater Sludge Using Dewatering Containers

    The relative cost of dewatering equipment varies widely and is directly related to the processing rate. For smaller utilities that need to dewater sludge in batches, dewatering containers are an alternative that can be relatively inexpensive and simple when compared to other technologies on the market. The most common type of dewatering container is based on a roll-off box design, although any ...


    By Flo Trend® Systems, Inc.

  • Waste not, want not

    Consultant Andy Ive considers solutions which not only comply but also enhance the environmental profile of today’s industrial companies. Until recently the prevailing perception in many industries, particularly those operating in emerging market areas has been that waste is an unwelcome inconvenience. The primary infrastructure of most companies was fundamentally not designed to deal with waste ...


    By Ive Design

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Information on Waste Management Practices

    The European Topic Centre on Waste (ETC/W) has prepared this technical report on the design of catalogues on waste management and waste minimisation. During the initial stages of the work, it became evident that basic work related to data, structure and definition of common code-lists was necessary to ensure that the catalogues, at a later stage, can be used as integrated parts of the ETC/W data ...

  • Waste management creates profit

    Large US furniture chain turns over USD 3 million through recycling of packaging. In 2007, the US furniture chain Rooms To Go turned over USD 1.75 billion worth of furniture – products packaged using vast amounts of cardboard, wood, plastic and EPS. But already in 1991 the chain introduced a recycling programme that has transformed waste into a profitable business which in 2007 ...


    By RUNI A/S

  • Waste Management Solutions for Business

    How to win the race for everyone Waste Management Solutions for Business Industry will always lead the way in the adaptation of new technology, and especially the technology of conservation. This is not necessarily for any ideological reason, but because the people who manage water use better understand the economic incentives for adopting new ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you