laser analyzer manufacturer Articles

  • Real Time Measurments of Acetylene in Ethylene Manufacturing Process

    Keywords Tunable Diode Laser, Wavelength Modulation Spectroscopy, Analyzer, Acetylene, Ethylene, Acetylene Converter Abstract The analyzer, based on near infrared Tunable Diode Laser Absorption Spectroscopy (TDLAS), was developed for the measurement of acetylene in process streams. Measurements of acetylene were made as under laboratory conditions and in ...

  • PureAire Oxygen Analyzer for 3D Printers: How Argon is used and Why O2 Detection is Required

    Thanks to new technologies, the 3D printers that have been used to create plastic three-dimensional objects can now print metal. Titanium 3D printing is possible thanks to a technique called DMLS, or Direct Metal Laser Sintering. While the potential to use titanium 3D printing is groundbreaking for many industries, the new advances could pose a health hazard if volatile gases used in the printing ...

  • GE Leakwise Application Notes: Oil Sheen Detection -- An Alternative to On-Line PPM Analyzers

    Introduction Discharge of hydrocarbons in industrial water is restricted by environmental authorities in most countries to a few parts per million (ppm). Environmental authorities currently monitor wastewater, stormwater, and cooling water discharges from ...


    By GE Analytical Instruments

  • European On-Line Particle Mass Spectrometry

    An international workshop on European On-line Particle Mass Spectrometry (PMS) was held 29th-30th of November 2005 at the JRC in Ispra, Italy. The main goals of the Workshop were: 1) To get together all European scientists involved in the field of PMS 2) To review the latest scientific progress on the field of PMS, with particular emphasis on:a. New instrumentationsb. Data analysisc. ...


  • A Comparison of Methods to Determine the Particle Size

    There currently exist a multitude of techniques to determine particle size distributions. However, in assessing the particle size distribution (PSD) of solids in a stormwater sample, the number of suitable techniques is considerably reduced due to the limited quantity of solids in a typical stormwater sample. The electrical sensing zone method (ESZ), which utilizes the Coulter Principle, and ...


  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Denver Colorado - Harvard Gultch Interceptor - Case Study

    Summary Pipe penetrating radar (PPR), a new pipe inspection technology was used for condition assessment in a 27 inch interceptor in Denver, CO. Metro Wastewater Reclamation District (MWRD), the owner of the interceptor had limited information about the condition of the pipe, so they contacted SewerVUE in order to undertake a multisensory pipe condition assessment that included CCTV, PPR ...


    By SewerVUE

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you